FOLDER MONITOR
Hi, would like to seek your inputs please. How to setup a Folder Monitoring which would know that everyday there is a newly dumped filed. Thank you so much for your assistance!
Introducing Wi-Fi Analyzer for OpManager
Wi-Fi Analyzer for OpManager effectively monitors signal strength, channel graph, and channel interference of all the available Wi-Fi networks. The best part is that you can enjoy the smart Wi-Fi analyzer with absolutely no advertisements. The enhancement is supported on Android mobile and tablet devices. The benefits of this most sought-after feature are: Easy-to-read-and-understand graphs to know which of your Wi-Fi devices and Access Points are performing low, good and the best. Sysadmins can
apm integration with opmanager
i install apm in the same server of opmanager but after complete installation when i press on apm tab all i have opmanager refused to connect.
OPManager Plus APManager as ADon issue while restoring backup
OPManager build 124075 APM adon build 13850 Steps: 1. Backup data from both aplication OPM & APM adon 2. Backup hole directory "Manageengine" 3. Fresh installation of OPM 124075 and APM 13850adon. 4. Register application with license. 5. Execute restoreDB.bat for OPM ends with errors: [09-24-2019]|[14:43:14:203]|[FINE] : Restoring table UniqueKeyDefinition [09-24-2019]|[14:43:14:343]|[FINE] : Restoring table PKDefinition [09-24-2019]|[14:43:15:045]|[SEVERE] : jdbc.RestoreException: Error occurred
Getting Triggered Data
Hi, I am new in OpManager. I am monitoring the router and set the interface monitor (ex. ifInOctets, ifInUcastPkts ) I have set the threshold for this also to get the alerts. But I also want to get the alerts data when data is breached the threshold but can't find the rest api to get the alert's data.
"Retype Password" field
Hello guys. I'm evaluating OpManager and when I go to Discovery/Input//Credentials/SNMPv1/2, there is a filed named: Retype Password. What password should be placed in that field? Also the notice "Both passwords should have same values" confuse me! What kind of passwords we are talking about here? thanks
trial license expired need to update license file
Hello, my trial license is expired and login to web server is not available. How can i update the license file (i have new license file). Regards
Device dependency to two switches
Hi Community, i have vmware hosts that have network connections to two switches. We solved it this way for redundancy reasons. How can I configure the device dependencies here? Greetings johnyrecon
IPAM in OPmanager v12
Hello, Does IPAM exist as a plugin in OPmanager v12 ? If yes please share with us a reference for that. Thanks,
Version and license of op manager 11
Hello, I have inherited a situation where op manager version 11.0 is installed. I would like to know what version/build i have and what license do I have? I can login to http://localhost/apiclient/ember/index.jsp#/Home/Dashboard/dashboard.name.overview I would like to know where I can find the information. Kindest regards.
Event Log Monitor Formatting
Everything works great with the event log monitoring so far especially for monitoring domain-level changes such as security groups or GPO changes. Unfortunately, the formatting of the alert notification really needs some help. Is there a way to get good formatting out of an event log alert and email notification? We have historically used SCOM for event log monitoring and the email notification it sends is nicely formatted looking like the original event log entry that is easy to read: The email
How can I add Database Query Monitor
Hello every one. we are using Op Manager 12.4 I want to add a database query monitor. I want to run a query in SQL server database and generate alerts according to outputs. I don't find any place to add this monitor. Any one can help? I attached screenshot. Thanks.
[Announcement] Free, one-day OpUtils training on September 18th, 2019!
Hi friends, Are you tied to your network? Always checking its status and unsure if or when it'll create a huge mess? If so, then ManageEngine OpUtils may be just what you need. OpUtils training was a huge success last year, so we're continuing training into 2019. This in-depth and intensive training will help you tackle various challenges with your IPs and switch ports. Trust me, you don't want to miss it. Click here to register now! Here's a quick look at the topics we'll discuss: Introduction
Auto-close SRs
Hi, Is there a way to configure OpMan/ServiceDesk Plus to so that certain alerts from OpMan auto-generate SRs in SD and close automatically?
Linux User Privilige
Dear support, Please send me require user privilege for Linux , SUSE, UBUNTU, ..etc to discover servers , we don’t recommend using root password Thanks, Hani Nasif Sr.Systems Engineer ManageEngine Golden Partner KSA
IPAM & SPM Add-on
I want to install for review IPAM & SPM Add-on (trial) for opmanager. where download?
NCM Plugin Fail Backup TFTP No route to host
Hello, I'm trying to configure backup with NCM during testing credential fail with this error copy startup-config tftp://<OPManager server IP>/2_ConfigFile.txt vrf default Trying to connect to tftp server...... TFTP put operation failed:No route to host the error is because in this switch vrf is not configured with default name but with "custom" name. where can I change it? Is it possible to have different "custom" name based on device?
Cannot add windows credential in opmanager installed on linux server
Hi, We have just purchased opmanager premium. I have set this up on a Linux Server. When I try and add a credential, there is no credential type for Windows. There is only snmp and telnet credential types. Am I able to add a Windows credential type to my Opmanager server running on Linux, or do I have to install Opmanager on a Windows server to be able to add a Windows credential. The Windows credential is available to add in Opmanager setup on a Windows server, but now in Opmanager setup on
Security Advisory | ManageEngine OpManager
Dear Customer, Greetings from ManageEngine OpManager. This is a security advisory mail for Applications Manager Plugin (APM Plugin) users. It came to our notice that previously, a user was able to bypass the username-password requirement and execute arbitrary commands on the server in the APM plugin. This issue has been fixed in the latest version of OpManager. To know more about the vulnerability, click here. Recommendation: We highly recommend that you upgrade to the latest version of OpManager
How to send notification on specific process monitor?
Good day, I currently have a specific Process Monitor in place on a couple of Windows servers. I'd simply like to say "if this process is not running, send out an email notification". However, when I step through the Notifications tab, I can configure the profile type, but am unable to find this particular process under the selection criteria. Is there some other way to set up this type of notification, or is there something I might have to do such that this particular process appears under the list
Migrating from OpManager Professional Edition v124000 to Enterprise Edition
Hello Support. One question. If we currently have OpManager Essential (Professional) v124034 on Windows Server 2012 R2 with MSSQL and want to migrate to OpManager Enterprise Edition, what is the procedure to do this migration? Regards. Rafael Vega.
2 Virtual interface, force tcp communiction only to one
I would like to show you an environment/configuration question I have PMP and OPManager in HA installed, this is the environment: 1 VM PMP 1 VM OPmanager 1 physical Machine with PMP and OpManager installed Physical machine have 2 virtual interface with different ip and different VLAN. 1 VLAN for PMP and 1 VLAN for OPManager Is it possible to configure OPManager run on physical Machine to have TCP Communication and listening port only to one of those virtual interface?
Is there a way to disable automatic discovery of devices?
I would like to stop OPmanager from rediscovering all the devices I delete and don't want in my monitoring. When I seach the forums, I can only find very old topics which don't seem applicable anymore and I can't seem to find the option in the settings. This automatic re-discovery is driving me insane. I just want to monitor a static set of devices.
Download device templates
So I have a few HP R3000 and R5500 UPS. I've started to create a custom template for them, and see I can upload my device template to share with other users. Where do I go to see what other templates users have created? I can't find it anyplace on the opmanager web site. Jeff
Sync asset OpManager with Service Desk Plus
I configured integrate Op-manager with service-desk plus in Op-manager and The message of success shows me (Sync Asset details done successfully) But no Asset is sent to Service Desk Plus .
Change IP Management GUI
I need to change the IP address of NCM manager OPmanager, how do I change the GUI interface access IP? NOTE: I'm in version 12
Join us in Toronto for our first ever User Conference in Canada : 3 days of invaluable training, and fun networking!
We'd love to see you in Toronto for the ManageEngine User Conference from September 10 to 12, 2019. It's going to be three action-packed days designed to help you get more out of your ManageEngine experience - with an entire track dedicated to IT Operations Management, and individual sessions focused on the products you love. REGISTER NOW Here's what you can look forward to: Attend in-depth product presentations that cover everything from feature updates and how-tos, to industry best practices.
Join us in Toronto for our first ever User Conference in Canada: 3 days of invaluable training, and fun networking!
We'd love to see you in Toronto for the ManageEngine User Conference from September 10 to 12, 2019. It's going to be three action-packed days designed to help you get more out of your ManageEngine experience - with an entire track dedicated to IT Operations Management, and individual sessions focused on the products you love. Click here to check out all the details. Here's what you can look forward to: Attend in-depth product presentations that cover everything from feature updates and how-tos,
Unable to connect OpManager to client server using Domain Account (RPC Server is Unavailable).
I have done exhaustive research into this topic, and no solution I have tried thus far has yielded any success. I am attempting to connect a new server to OpsManager, the server was added successfully, but when attempting to have OpsManager connect to the Server and begin monitoring using the Domain Admin Service Account that I have designated, I receive the "RPC Server is Unavailable" error. However, when connecting using ONLY a Local Admin account, it connects just fine and there are no issues.
Retrieve a device's OS name in Rest API
Hi, How could we get the device OS name and version via API request? In the listDevice and getDeviceSummary endpoints, there's a type property which is giving the OS name in some cases (like windows 2008 R2, Windows, Linux (without any more details), ...) But it also has the values like Cisco Catalyst 3750 Series or Compaq Device which obviously aren't OS names. On the other hand, in the listVirtualDevices endpoint, there's an OS_NAME property which gives a more accurate OS details and has only the
Device template with same name already exists
Hi, I was having an issue backing up our new Aruba switches. I noticed there was a new device template on the ME site, so downloaded the XML. Tried to import it and I get the error message "Device template with same name already exists." I deleted the devices associated to that template, I only had 3, and tried to reimport and I get the message "Device template with same name already exists." Decided to delete the original template from Settings --> NCM --> Device Templates and tried to reimport....same
Internal Server Error while calling getProbeURL
Hi, Trying to get probe url via API, it returns Internal Server Error: {"error":{"message":"Internal Server Error while processing this request.","code":5000}} This is the sample url I try to get API response through: http://<CentralOPManager>:8060/api/json/device/getProbeURL?apiKey=<API_KEY>&name=172.18.63.3.70000000001 P.s: I don't have access to system logs or OPManager web console with full access permission. Please porpose potential possible reasons for this internal error. Thanks
API call is blocked on central server
Hi, I want to call getDeviceSuammary and many other device/interface specific endpoints on a Master-slave installation of OPManager. But I get this error mesage in API repsone: {"error":{"message":"This operation is blocked in Central Server.","code":5004}} However, The call of listDevice endpoint returns the correct answer without any error. What's the reason and how could I get details of the devices which are behind probes? Thanks
Please Select a Vendor
Hi, I am trying to add a Polycom device to be monitored but it is asking me to select a vendor before I can add monitors. Problem is, Polycom isn't an available vendor. Should I just select something random or can additional vendors be added somehow?
Mikrotik Temperature via SNMP
Hi ALL i have Mikrotik router RB3011UiAS I tried get Temperature via SNMP. Mikrotik has IOD for it: [admin@MikroTik] > system health print oid voltage: .1.3.6.1.4.1.14988.1.1.3.8.0 temperature: .1.3.6.1.4.1.14988.1.1.3.10.0 i ADD this OID ( .1.3.6.1.4.1.14988.1.1.3.10.0) to custom monitor in OpManager but OpManager get temperature in x10 value real temperature (in mikrotik terminal or winbox) is 36 C in OpManager is 360 C Why???
Join our free workshop and elevate your network monitoring skill set!
To stay ahead of the competition, it is critical for network admins to keep themselves updated of the latest advancements in technology. We, at OpManager understand this. That is exactly why we are hosting a free IT Operations Management workshop in New York and Chicago on Sept 24th and 26th respectively. Our workshop will help you understand how to overcome the most common challenges faced while monitoring your network infrastructure. Register now Workshop highlights: Understand efficient ways
Upgrade to 124033 service pack
Hi. After I Upgrade OPManager to 124033 service pack, I cannot connect to server by mobile app( I tested android & IOS app) but it established on web browsers.
Custom Monitoring using snmptable
Currently we can add the OID which can be use via snmpwalk command. Since its not available in Opmanager, We unable to monitor some parameter which can be found using snmptable command. e.g in F5, we want to monitored the Pool Member state.
To add existing email notification to device in new version
How to add existing email notification to specific device performance monitor (example memory utilization threshold)? for new version 12.3.097. The old version is more simple
OP Manager new version is troublesome
The new version is not user friendly the GUI is troublesome and confusing.i already use the old version almost 5 year. Any idea how to revert back to old version.if cannot plan to use other application form other vendor instead Opmanager
Next Page