Can't display full screen IN IE Add Subnet Add Manually
Can't display full screen IN IE When Add Subnet and Add Manually,it display title only,why?Will I change my IE configure?
IP Address Management - Enhancements
Hi, We have planned to enhance the IP Address Manager tool with the following: 1. The Summary View will include four editable columns to specify a name of the subnet, description of the subnet, VLAN details, and to specify whether it is a part of DHCP or not. 2. The subnet details view will have new additional columns to include description/comment, ability to mark IP Addresses as Reserved, Response Time, and the location of the device. 3. Additional Reports to view the Subnets in DHCP, Subnets that
Problems with v6.5
Hello, 1. after rename Node in hierarchical representation network is new name OK. After logout or restart service OpUtil is see again old name. 2. in select "approve subnet" I see not full windows (screenshot) 3. in windows for Select parent node > Expand I not see next nodes (screenshot2) Thanks Roman
host not alive in the network
I have been trying to set the SNMP trap receiver but no luck so far. I have configured port 162 for listening the traps but is getting nothing. I have done SNMP ping to 192.168.10.20 which is the server sending the traps and in the status it says hos not alive in the network. The same is for the host that is listening. I also tried to change the port from 161 to whateverbut in the SNMP scan I got system not alive.
Config File for Extreme
Are there plans to setup the Config File Manager to work with other vendors besides Cisco. In particular I would like to also see Extreme switches. Thanks, Earl
Error in 5031 adding switch
Hello I try to add our core switch Cisco 3750 to OpUtils without success. I go to Switch Port Mapper - Switches - Add Switch. Then i enter the IP address and SNMP community and click Add Switch. After 3 hours the status is still In Progress. I deleted the switch and added it again but still the same, it doesn't add. I added a bunch of other Cisco 2950 and 2960 without any problem. When i go to Diagnostic Tools - SNMP Ping i can ping the 3750 without problems, so SNMP should be correctly configured
SwitchPortMapper / Export issue
I Just download OpUtils 5. There are "Failed Switches" that I would like to export in Excel. But after I click "Export As" icon. Size of Excel, CSV, even PDF is 0 and it contain no information. Do you have any suggestion? For more information my Build Number is 5040 Thank you
Multiple Subnets and DNS Servers
Using OpUtils Prof. Very nice. We have multiple VLANS and multiple Subnets with multiple domains. Is there a way to say, for instance Subnet 192.168.9.0 uses 192.168.9.100 for DNS while Subnet 192.168.20.0 uses 192.168.20.20 for DNS Thank you.
Problems with Switch Port Mapper
I need to add another router but I am unable to do it, I want to use swtich port mapper tool that is based on the result from the router. I have a swtich where all the ARP table is on a specific router, so i need to add this router but I am unable to do it, I know my router has SNMP Up and running, if a use another software to retrieve arp table from my router using SNMP v2 I am able to do it
[OpUtils 5] Phisical Interfaces Count
Hi there, we need to count the phisical interfaces on a Cisco 7604/7609 router. Is there a way to exclude subinterfaces from port inventory? Thanks in advance for suggestions.
mac-ip-port
is there a way to run a report that will show the Mac address, IP address and to which switch and the switch port a device is connected to? william brooks
Port Operational Status
How does the software determine weather the port is used, available, or Transient? There are some ports that are marked as transient and looks like they should be available. Thanks, Steve Mize
Generating Rogue Detection Reports
Can we do something different with the way that Rogue Detection generates reports. Pretty much every current format is worthless. The PDF version has very large fonts and is only able to fit 2 or so entries per page - Columns need to be widened for descriptions. None of the export formats CSV, etc contain any of the port information. Please look at and address. Thanks in advance.
Help needed: Which tool to use?
G'day people, I chanced upon this forum (thru' web search) when I was looking for a tool to monitor what I'll describe immediately following: I would like to monitor for a change in IP and get an email alert. Specifically, I have a server running on a dynamic public IP; I'm aware of dynamic DNS services (which I'm using). My interest is that when the public IP changes, I would like to receive an email notification. Wud appreciate any kind advice as to which tool is most suited for my purpose. Thanks
Time Showing in Graphs
Dear Sir, I have installed Manage Engine OpUtils 5 on my pc. Everything is ok but the graphs showing in bandwidth is show time 2 hours ahead of actual time in my country. I mean now its 3:20 actually here in our country and graph is showing 5:20. What is the solution? Waiting for your reply thanx Imran Ashraf imran771
SNMPv3 for OpUtils
When will SNMPv3 be available for OpUtils. We have just finished taking out SNMP v1&v2 comm strings in all routers and switches. With this happening, Switch Port Mapper, Config File Manager (Tools I use the most) will not work any longer. Thanks Gene Geng
upload config from config file manager
I am attempting to upload a config using the "upload config file" option in the upper right corner of the Config File Manager main page. I saved the config from the device, using the oputils .config file type. I opened it in wordpad, edited 2 lines, and saved it back to my desktop. I attempted to upload it using the "upload to single device" tab. it appears to do nothing when I click on the upload tab. I also attempted it from the "upload to multiple devices" tab but only sending it to one device.
Config File Schedule Hourly
It would be extremely beneficial to have the schedule for Config File backups allow hourly backups. Also, how many backup configurations are kept before they are overwritten, if at all. Thanks, Earl
regarding SNMP community
i have installed SNMP on my PC....but now i want to kno what exactly is community in case of SNMP...what exactly do i have to do to decide comunnity name and how can i assign it to agents and enter its name in main manager pc
IPAM integrates with Active Directory
Hi All, In the new release 5.6, Active Directory integration is added. It means it will check each and every IP is part of Active Directory or not. If you have active directory network and lot of windows desktops & servers then the IPAM automatically detects the IPs which are are part of the active directory. Please download the latest version from http://manageengine.adventnet.com/products/oputils/download.html thanks Mathi
An Error occurred!
An Error occurred! Tool Name : Message : Root Cause : Send this Issue to OpUtils Team Click here to create the support file to be sent to OpUtils team.
Backup OpUtils 5 Settings
How would I backup OpUtils 5 settings? I want to backup all the information that I have scanned so far, as well as the devices I have added. Thanks to anyone who can help.
Device with Virtual IP?????
I am showing 3 ports (out of 1500) in Switch Port Mapper desiganted as having "Device With Virtual IP" . I have physically looked at the end hosts and for the life of me cannot figure out why they would be getting classified as such. Any ideas?
Alert Upon Successful Config file Retrieved
Is there anyway to set OpUtils 5 to email alert when configurations are successfully retrieved from switches/routers? Or email on failure?
Cost of this software
I have installed the trial version of this software i want to know the cost of this and also does it include the technical support? and does it have the sms facility avaialble in case of any device got down? please provide me the details Sameer Muzaffar
Config File Manager Backup Hourly
Would it be possible or is it possible to setup the automatic backup scheduler to run every hour. Also, is it possible to have OpUtils send an email when the backup has completed. Thanks, Earl
E2002: Specified OID is not implemented
Hi, Can anyone help with how to resolve the above error please? SNMP is working on the device as other info is appearing, but it can't return any info on CPU usage under network monitoring which is the info I need. Thanks, Julian.
User Management
Hello, I have recently buyed this software and I'm unable to set up some read-only user accounts. Would you please help me out? Ignacio Torres
Upgrade fails from 5016 to 5036
I am trying to upgrade to 5036. I get an error on the install and it uninstalls. I found this in the log files. java.io.FileNotFoundException: C:\Program Files\AdventNet\ME\OpUtils\patchtemp\jarupdate\org\apache\jsp\components\jsp\error (Access is denied) I backed up the database and stopped the service prior to updating. Any ideas? Thanks Marty
Possible Bug Found - Config File Manager
Hi, It seems that I may have found a glitch with the OpUtils Config File Manager. In our environment we successfully setup config file manager to retreive the startup/running configs from a number of switches at a pre-determined time lets say 7pm each night. All of these devices were configured with the same SNMP community string. This feature was up and running now for the last few weeks with no issues at all. Yesterday I added a new device to the config file manager and I added the device with
SwitchPortMapper / Export / PDF issue
I have just purchased the latest verion of "OpUtils Pro". I demo'd the previous version and was able to Export to PDF the switchport maps just fine. NOW with this new version when you go to export as PDF/View the text is too large to fit on the PDF properly. It's not useable. Is there a fix for this issue or a setting somewhere that addresses this issue? thanks ooga
IP Address Manager Schedule Issue
It appears that the IP Address Manager Scheduler doesn't work for me. I have the IP Address Manager scheduler enabled to run daily but when I check the IP Address list the subnet hasn't been scanned for almost two months. If I perform a ping sweep of the subnet then the subnet is updated in the IP Address Manager. How can I ensure that the scheduler functions correctly?
Disk Space
Hi, I'm trying to monitor disk space so when the limit goes above a certain percentage or amount I get notified via email, however, I can't get this to work. Anybody any ideas?
Do newly discovered machines get added to the WOL jobs?
If I schedule a job on a subnet and then the next day discover 5 more machines on the network, do they get added to the job automatically? If not is there a setting that can enable this?
Rogue Detection - Rediscovered MAC
HI, I would like to know what happends after I mark a MAC as Rogue, would I get an alert, or an email if the device is reconnected to de network ? For example, a non-authorized laptop is connected to the network and by the time I notice and track to know if it is an authorized laptop or not, it is gone. Then I mark it as Rogue. Next time it is connected to the network, will I get an email alert ? or not because it has already been discovered ? Thank you.
tyring out proxy ping
so after installing i try proxy ping setting my router's ip address, either one of two snmp RW communities, and a destination ip. simple enough it seems, but i get the following two errors depending on what community i try: E2001: No response to SNMP queries - [router ip] E1001: Unknown host - [router ip] now granted, i'm a noob, so i'm probably missing something here. i know i have access to the router from this pc because i can access it via ssh or telnet without issues. i've installed oputils
Exception Error: [ServletException in:/SummaryView.cc] Exc
[ServletException in:/SummaryView.cc] Exception occured when trying to find the view configuration for the given view id : TrapViewerReport'
Cisco routes listed incorrectly
Hi, I am new to OpUtils and I am using OpUtils 4 professional version. When I attempt to use the ip routes tools to determine routes on a 6509 switch/router and it seems the columns values are in the wrong place. When I run the tool the destination network appears under protocol, under destination are the known by interface ip address, and the next hop list an interger value of 11 for all listed destinations rather then an ip address or hops #. The routes on my router are fine. How can I correct
OpUTILs doesn't start - CreateFile error while creating DB
Please help [14:16:09:043]|[10-06-2008]|[com.adventnet.persistence.PersistenceInitializer]|[SEVERE]|[10]|: Exception while creating DB : operating system directive CreateFile failed null|java.lang.RuntimeException: Exception while creating DB : operating system directive CreateFile failed null at com.adventnet.db.adapter.firebird.FireBirdDBAdapter.createDB(FireBirdDBAdapter.java:326) at com.adventnet.persistence.PersistenceInitializer.startDB(PersistenceInitializer.java:553) at com.adventnet.persistence.PersistenceInitializer.initializeDB(PersistenceInitializer.java:331)
TFTP y Config Manager for other devices
I have 9 router ENTERASYS, and i like to manager the configs for this with the OPUTILS. The TFTP server accept this configs, but i can�t to compare the configs or upload the config to router. ENTERASYS is a mark of router important, have many functions similar to CISCO.
Next Page