Port
ne one knows how to change the default port on an already installed OPUtils system?
Allied Telesis stacked switches problem
Hi, I have got 2 AT-9448s/XP switches configured in a stack, where one of them is having a role as master while other is member. In Oputils 5, on switch port mapper, it shows only 48 ports, and it should map all 96 ports from both switches. Also, Oputils groups by the hosts from desired port on both switches. Example: on port 1.2 I have 2 hosts (host a, and host b), and on port 2.2 I have 3 hosts (host c, host d, host e). On Switch port mapper I can find 5 hosts under port 2. Which means that it
delete default group
In IP address manager I created all of my nodes and moved the subnets into them. Now I want to delete the default group because it is not being used, however I do not see how I can do this. Any help is appreciated. Thanks.
Cisco asa MAC address
Hi, Can OPUTILS 5 get MAC to IP table from Cisco ASA 5520? Thank you! Mike
Cisco asa Site2Site VPN
Hi, I have site2site VPN connection with two branches, topology like below OPutil5 (first branch private network)---------- Cisco firewall ======Site2Site========== Cisco firewall --------- second branch private network. the OPutils5 in the first branch network is routable to the second branch private network, I can ping the both private network without any problem, but when Oputils 5 scan the second private network it can get the IPs but not the MAC address, I configured the second Cisco
DEVICE MANAGER
MY DEVICE MANAGER DOSNT SHOW ANY DEVICES
Router Functionality?
Does anyone know what the "Routers" are used for in OpUtils? I know what a router is and how it works ..... just how does OpUtils utilize this device? Maybe the better question is: What information exactly does OpUtils get from a configured "Router"? Please be very detailed ..... The underlying reason is that I am trying to find out where OpUtils gets its infromation for IP<>MAC assignments because I am missing many of them. I would assume it gets this information from the ARP table in the Switches
Maintenance Mode?
Is there a way to put Oputils into Maintenance mode? I ask this question because when we run our daily backups, we get Alerts from the bandwidth monitoring tool. Thanks Trevor
Cisco router add
When trying to add cisco router to routers, i dont know how to fill in the fields. When i access my router via telnet it asks me those only: Username: Password: then i do enable Password: What are the rest fields needed to be entered like prompt? etc. Please tell me what to enter to which field?
How to add a router
Can someone please help me to add a router to this program. I tried doing it but after selecting cisco from the device list it add some columns to be filled... i am to recommend this software before we can purchase it for our company... Thanks
Running OpUtils and SNMP monitoring software on same server
I have problem with running SNMP monitoring software (Mikrotik TheDude) and OpUtils. This cause problem with SNMP queries from one IP address. How I can setup source IP address for SNMP queries for OpUtils? Example: I have 2 IP addresses: 10.10.10.1 and 10.10.20.1 on the server. Can I set IP address 10.10.20.1 for OpUtils? Thanks in advance.
Bandwidth Monitoring
Hello Quick question, is it possible to monitor bandwidth per port instead of per device? I ask this because when our nightly backup kicks off, we get alerted that ports x is over the set threshold. Thanks Trevor
Oputils and AD users
Hi I trying to integrate OpUtils user management with Windows domain domain controller. But there is a strange error when I tried to add existing AD user into OpUtils user. I received error: User name cannot contain invalid characters. Our AD user names contains a dot as a separator. Why is dot "invalid character" in Oputils ?
Connecting remotely
I have downloaded the program to evaluate. I installed it on a machine, and i connect to it thru the localhost web browser. How can i connect to it from a remote machine? I have tried using the IP address:7080, i have tried using the FQDN:7080. neither will connect. Any help is appreciated.
unable to load cisco MIB into MIB browser CISCO-QOS-PIB-MIB
unable to load cisco MIB into MIB browser CISCO-QOS-PIB-MIB attempted SMI version 1 and SMI version 2 and no luck.... any suggestions
1 IP 2 Mac address
Hi everybody, how can I deal with a case of two MAC addresses sharing 1 IP address as it happens with network teaming/bondign cases? I tried to import using as file but it complains if I put the two rows. If I import one row at a time it takes only one value. Is this case taken into account in OpUtils? Regards, Juan Pablo Baserga Director de Tecnología y Proyectos Technolgy and Projects Director Ph: +54 (11) 5295-3915 Fax: +54 (11) 5295-3950 Mob: +54 (911) 5318-1127 Av. del Libertador
Integrate or link Netflow analyzer and Oputils
we manage a lot of servers on several different IP ranges and would like to utilise the billing and netflow functions of Netflow analyser in the same are and login as the IPAM functions in Oputils We had assumed there would have been a shell script that you could plug these various scripts into to create a portal location for the management of services rather than individual scripts, which doubles up our workload and handling, and doesnt allow for a very intuitive way for our clients to view and
config file manager SNMPv3
Hi, i have some trouble with the config-file-manager and snmpv3. Here ist the relevant config: snmp-server view oputil mib-2 included snmp-server view oputil iso included snmp-server view oputil system included snmp-server view oputil cisco included snmp-server group oputil v3 auth write oputil snmp-server user oputil oputil v3 auth md5 writepassword snmp-server user snmpuser snmpuser v3 auth md5 readpasswor priv des readpassword snmp-server group snmpuser v3 priv please send me an light. G.Thuemmler,
Config File Manager - Issue
Hi, I have an issue adding a cisco device on Config File Manager. Always it says: E2004: Community with read/write permission required This error appear in all devices. I have check snmp community on devices and it is ok. Maybe I am wrong on something, I don't know. Pls help. Thnx
IP manager only shows Linux "Device Types"
Hi, IP manager can connect thru SNMP to windows and Linux Machines, but only the latter are shown in the Device Type field. My Oputils is running on a Linux host, so there is no WMI. Is there a way to show Windows Machines properly? Regards, Juan Pablo Baserga Director de Tecnología y Proyectos Technolgy and Projects Director Ph: +54 (11) 5295-3915 Fax: +54 (11) 5295-3950 Mob: +54 (911) 5318-1127 Av. del Libertador 6449, p 1 (C1428ARS) Buenos Aires, Argentina .....................................
Manually add IP address
Hi, in my network the OpUtils server doesn't have access to all the VLANs, so it can't resolve all MACs in the switch. Is there a way to manually configure the IP address in Switch Port Mapper or a workaround for this situation? Many Thanks!
VLAN names not updated
Hi, I recently updated the VLAN names of my switches but Switch Port mapper still shows the old names. My software is OpUtils 5.8000. Regards
I cannot import CSV in Add Subnet
Dear All, Please help me.. ASAP, I cannot import CSV in Add Subnet error code: Data Imported Fail Import Failed : 1 [ServletException in:/lan/IPAMMainPage.cc] For input string: "null"' What solution? Thx u... Best regards, Rowan
Scanning Switches Please wait.
Dear support , I'm using OpUtils : Release Version 5.8 Build Number 58005 built on window 2k3 , i'm using IE 8 on windows7 to Scan All on Switch Port Mapper , but it running Scanning Switches Please wait a long time and never stop , i press on Stop Scanning , but it running , not stop . Please help me to fix this problem , thank a lot !
Font changes per row in OpUtils 5.8
In tables that list computers and users, I notice the font changes between a serif and a sans-serif font. Is this by design? How can I make the font-style consistent. It's really annoying!
Cannot see any IP Addresses of computers
G'day, We are trying to see which IP addresses are connected to a specific switch port, however after scanning the switch we still dont see any IP addresses listed. In fact only half the connected PCs dont even have a MAC address showing. We have HP ProCurve 5406zl switches, which I believe also act as a router. The management of them is performed from VLAN 1 which has a different Subnet and IP range to the VLAN 5 which all the computers are connected to. Would this make a difference? I.E.
Restore to backuped folder
I made o copy of the OPUTILS directory before i performa an upgrade to 58001. I need to fallback to the copy. i STOPPED the managengine service but can rename the OPUTILS dir because it is in use. How do i completely shutdown the managengine?
Problem adding 3Com 5500 Router
Hello... Has anyone had any luck or know what I need to do to get my 3Com 5500 Routers working in OpUtils? I've entered the IP address of the router, V2c and the SMNP Read Community string, I'm using Telnet as the CLI connection. I've tried using both HP and Cisco as the vendor name. I know my username and password is correct, but regardless it keeps telling me it 'Login failed: Password or Prompt are incorrect!" Any help is appreciated! :)
How does an existing customer get build 58001 of OpUtils?
I see a link on the downloads page to get version 58001 of the OpUtils application if I'm currently running version 57000 ... 57003. There is nothing for a current 58000 installation. When I download and install the HotFix package, I get a message stating that it is not valid for the version I am currently running. I saw a post from February stating that the link would be provided in an email, but when I hunted down the email and clicked on the link, it took me to the same download page I get to
Support IPv6
Hi Everybody! I didn´t see any option in OpUtils for agregate the IPv6 subnets. The aplication support this feature o not?
Upload Config File not working
I am trying to upload a config using the "upload config file" option in the upper right corner of the Config File Manager main page. I saved the config from the device, using the oputils .config file type. I opened it in notepad++, edited 3 lines, and saved it back to my desktop. I attempted to upload it using the "upload to single device" tab. it appears to do nothing when I click on the upload tab. I also attempted it from the "upload to multiple devices" tab but only sending it to one device.
Blocking the IP and MAC Address.
Dear OpUtils Support Team, Our korea's many enterprises wants to blocking the IP and MAC Address. And they are interested in OpUtils product. But the OpUtils is impossible taht the IP and MAC Address is blocking NOW. Can you plan the support in Roadmap?
Can you assign to particular device the IP address?
Hi All, Can you assign to particular device the IP address? Our customer wants to assign to particular device using OpUtils tool available IP address. Is it possible? If it is impossible, can you add this feature in the future? Thank you in advance. Ko Young Suk Telemant Corp.
Where do you configure the DNS server IP address in OpUtiils5?
I found one place under IP Address Manager -> Settings where it calls for a "DNS Server Name" (wouldn't you need the IP address, though, not the name? How is it going to find resolve the name without a DNS server?). I've set that to the IP address of my machine running OpUtils5, since that machine is also running SimpleDNSPro. I can resolve local names and IP addresses via NSLOOKUP from a DOS Window, but the OpUtils5 reports and other things don't resolve private IP addresses to names, despite their
How to delete scanresults of SwitchPortMapper?
Hi, I want to start over the scan of SwitchPortMapper and wants to delete all the existing results of previous scan. But how to do? thx marc
Font changes per row in list
Currently in several table columns in OpUtils our font changes between rows. For example, under Network Monitor, for the Status and Last Update Time columns (not limited to these, though) the font changes from a serif font to a sans-serif/round font on every other line. How can I make the font consistent in all rows of all tables universally in the program?
Retrieving cisco router config changes hostname!
Tonight we had a minor disaster. I set up OpUtils to copy some of our router configs, which had hostnames like this: hostname router1.site1 hostname router1.site2 etc. Well, OpUtils CHANGED THE HOSTNAMES when retrieving the configuration, dropping the suffix qualifier. As a result, a technician didn't realize he was in the wrong router and screwed up a configuration. I've verified the behavior in several tests. It also changes the domain name, prepending the suffix it stole from the host name (e.g.,
Custom MIBs in the switch summary
Hi, Currently trying out OPutils as I look for a system to track our switching/ip needs, and I'm having a bit of trouble with getting info up for my switches. I am using Extreme Summit 350x switches, and the switch summary screen slows port/mac and link information, but not the VLAN names of each port. I have added a custom MIB into the MIB browser, and if i walk through using that MIB, i can see the VLAN ids. My question is, how do I get these vlan ids to show in the main switch screen? Thanks,
when i am trying to setup email alert it is giving me error 6002
i tried to set up the SMTP with gmail and yahoo but are not working getting error E6002 please help me out inthis u can email me on shinep@intelligroup.com
All my laboriously entered subnets vanished without warning!
I spent a couple hours carefully entering all our subnet records, then suddenly they all vanished! I thought I must have accidentally hit delete or something, so I began entering them again, and before I got a third of the way through it happened again! This time I'm certain I did not press delete (and anyway, OpUtils would have asked for confirmation, no?). The records all entirely vanished. I just bought this and if it's unstable I'll want a refund. What's going on? I'm running on Windows Server
Next Page