DHCP Scope monitoring
We are currently using cisco 3750's to control our DHCP scopes. Do you have any plans to build this feature into future software deployments? Right now it just supports Windows based DHCP. Kennie
Bandwidth Monitor
Running manageengine opsutils 6. was wondering if the bandwidth monitor supported snmpv3...does not look like it to me but was wondering if I was just missing something. Thanks, Louis
Adding 6504 devices in the Config File Manager
I am trying to add 6500 series devices into the Config File Manager piece of OpUtils 6. It will let me add it with the correct snmp value using v2c but gives me a configuration retrieval error. Is this device supported in the Config File Manager piece?
OpUtils Feature
I use OpUtils Config File Manager to backup all my Cisco routers and switches. But it would be nice to be able to backup Cisco ASA firewalls as well. I know you have Device Expert that can manage the ASA configs, but I rather not have to buy and use an additional piece of software. I would like to manage all the Cisco configs in OpUtils since I use the other features of that program as well. At this time, the ASA's cannot be managed in OpUtils because they don't support the write and set commands
Switch Port Mapper
We are currently using Oputils for IPAM but would like to start using Switch Port Mapper. In some cases we have isolated Cisco switches by design for security purposes. Is there a possible way to manually import the switch config vs. using SNMP?
Broadcast monitor
Hi Guys Can u please tell me how can i check broadcast in the Network from Oputils Thanks and regards kaleem
Collect switch serial number?
Can the serial number on a Cisco Switch be collected and displayed in OpUtils Switchport Mapper? This could be very useful for inventory purposes.
OpUtils6 - IP Address scope discovery hits SNMP port in the process
OpUtils6 - IP address polling. How do I prevent OpUtils6 from polling the SNMP ports of end hosts during its automated discovery process?. As soon as I add the local "seed" Routers to the tool for the first time it appears to automatically default to hitting 161/162 as part of the IP Addressing scope discovery process. This causes issues as it trigger false positive alarms from the network of rogue snmp queries. Cheers, Rick
Switch port mapper
How do you get dns to show in the output of the switch port mapper results? We are running all cisco equipment 2950 switches with dns configured on them. is there a trick to it? Thanks, Louis
Oputils Service is Failing to Start
My oputils server is down, the service will not start: "The ManageEngine OpUtils service terminated unexpectedly. It has done this x time(s)." This started last Friday and support has not called back.....can anyone help? Thank you.
Bandwidth Monitor - E2005
Hi, When trying to add a device to bandwidth monitor I get the following error message, - E2005: Not able to retrieve complete data from the MIB. Any ideas why I receive this message. I am able to do an snmpwalk on all OIDs from the CLI on this box and from other machines, just unable to add the device to bandwidth monitor within OpUtils. Thanks
ManageEngine vs Orion vs Spiceworks
Is there a comparison chart that someone can point me to? Thanks Sam
API for IP Address Management
We are pleased to announce the availability of API for accessing the IP Address Manager data from OpUtils. This means you can programatically connect to the OpUtils database to fetch the details of your IP Space. The initial version will let you get the following details: Summary of all you Subnets Summary of a specific Subnet Details of all IP Addresses of a Subnet Details of a Specifc IP Address Details of a range of IP Addresses The information will be provided in an easy-to-interpret XML format.
Problem to delete subnet "100.0.0.0/8"
Hi, In the Discovered Subnets, I got a subnet "100.0.0.0/8". I approved this subnet, but now, I want to delete it. Unlike othet subnets, I cannot delete this one. Is that because it is such a big subnet? Is there a way to get this "100.0.0.0/8" subnet deleted? Many thanks, Raphael
Network Monitor configuration questions
1) I have over 200 hundred switches I monitor with Network Monitor. I do not have, nor do I want to configure, DNS names for all of those switches. OpUtils pulls the System Name via SNMP. How can I replace the "DNS Name" column with a "System Name" column? I would love to do this everywhere in OpUtils, but the Network Monitor would be the first place I would like this change. 2) I have edited the email alerts to replace the "DNS Name" field with the "System Name" field and when I click the
Problems adding router
Hi, I just installed OpUtils 6 to evaluate IPAM. First thing that I tried to do was adding a router. The router is a Cisco 3725 multi layer switch with "ip routing" enabled. In OpUtils I filled in the IP address of the router, SNMP read community, vendor name, user name, password and password prompt. After a while, I got a message "login failed: Password or Prompt are incorrect. When I use Wireshark, I can follow the Telnet conversation and I see the exchange of the userid, the password, followed
How to change email template trap receiver
How to change email template trap receiver in Oputils6 ? I want to add ifAlias in mail. Thanks, Peter PP.
Sorting IP addresses
When sorting by the IP address column, is it possible to sort by octet rather than by straight numbers? For instance, when I sort by IP address, they are listed in this sort of order: 10.1.11.32 10.1.11.6 10.10.11.1 10.114.11.1 10.5.11.1 10.81.11.1 I would like to see that sorted like this instead: 10.1.11.6 10.1.11.32 10.5.11.1 10.10.11.1 10.81.11.1 10.114.11.1
Clearing out old port info
When I'm looking at ports on a switch old info is still listed on some ports. Is there a way to clear out old info?
Scheduled SPM fails frequently
Hi, in our environment the switch port mapper usually fails after one or two cycles. SPM is showing "Scanning...", but nothing happens. Also scheduled scans in another Switch group doesn't happen after that. We had the issue with 50018 as well, but it still isn't fixed in v6. Anybody experiencing the same? Regards GWHome
How to remove MIB from the MIB list.
Hello, i didn't find any way to remove the previously added MIB. the way we add MIB in the MIB list, what is the way to remove any MIB. Thanks, Rajashri rajashri
UPS's are complaining about unauthorized SNMP Scans from OpUtils, but from where ?
Our UPS are complaining about unauthorized SNMP scans from the OpUtil machine. All I'm using is switchport mapper and that isnt doing any scans of entire subnets as far as I can tell. What could be causing it ?
Is this possible in IPAM ?
Hi guys, Regarding IPAM section again, in the Search Field, by default we have search options based on IP addresses, MAC, Alias, Location etc. I want to know if is possible to add other queries based on Subnet Name, Vlan Name? These fields comes by default during the creation of new subnets. thanks, Toni
Two questions regarding IPAM
Hi guys, Good job with this software, appreciate it. I work as an IT network in one ISP. Before a couple of days we installed OpUtils 6, trial version. For our team, most important feature of this software is IPAM. So I have some questions. 1. Is there any way to have only IPAM software, 100% pure, without other net tools? 2. When we tried to add new column ( VLAN id) at IPAM/Custom Column we failed in "SUBNET Level". The new column doesn't appear in subnet table. The same thing we done using the
limit switch interfaces to physical interfaces / no VLAN´s
Hi, i check the OpUtils for our company. (evaluation) If i add a new switch (cisco) the switch is scanned and all interfaces are displayed. But all VLAN´s are displayed as interface. Where i can switch off the "VLAN interfaces" or limit the analysis to physical interfaces ? regards Stefan
OpUtils problem
When i try to approve a subnet in ip address manager it throws this message: Column index out of bounds. Index: 16, Column count: 15. Table: SubNetwork How can i repair this thing?
Switch Port Mapper VLANs Allowed on Interface
Hello. I am trying to audit all vlan information in a cisco switched network that contains over 100 switches. Could you answer the following question. Can Switch Port Mapper display a column to show allowed vlans on a particular trunk interface. This would be useful to map the vlans in our network. Regards Paul.
Upgrade OpUtils 5.8 to 6.x
How do you upgrade to the new version of OpUtils 6? When I run the installer, it wants me to uninstall my current version before the install will run. How do I do this without losing my settings and configuration? Thanks.
Export data by API how to?
Hi, I am working for exporting data from IPAM now but no idea how to do it by API export data from database directly, that is because it require to do some data sync with another system running at backend. Did any one have more information about this? Thx!
Upgrades to 5046
Were there any upgrades to build 5046? I do not have an annual maintenance agreement, and can not get one at this time, I am just looking to see if there were any fixes out there. Thanks, Gene
Exception error in bandwidth monitor
I continue to get the following error in OpUtils in bandwidth monitor module when switching to another port to view traffice details. [Exception in:/network/BandwidthMonitorInterface.jsp] null I have already upgraded to version 6 and still have same problem.
How to change Database server
Hi, Did somewhere URL can guide user how to change the default database to customer database? I am trying to change from fireball to MYSQL but only fine database_params.conf in KB but no further steps teach me how to do it. Thanks in advance!!
Some user role question.
Hi, I have some problem in user role. Here is problem that don't know how to do it. 1. I have read the access restrictions role table but not sure that is can I do some customs ACL. Example: - Can I limit which user who they can read which IP info in network monitor? - Can I limit which user who they can read which zone where I have pre-defined? Additional 2. Is that have any addon it can included the netflows featous together? Thanks in advance.
Is it possible to add a Device type?
Hi there, is it possible to add a Device type? I found that Oputils Device Type list doesn't include FreeBSD, VMware and other devices I have in my network. Regards, Juan Pablo Baserga
switch port mapper for catalyst 4507R not displaying MAC addresses
I'm running OpUtils Professional 5.8 #58027. I'm using snmp v2 to perform switch port mapper but some interfaces show up as Used/Up with not mac or ip address displayed. If i go to the CLI of the switch, it is very obvious that both are available ... here's an example of the output in the web interface with the corresponding CLI output: MDF-4507R#sh mac- int f4/5 Unicast Entries vlan mac address type protocols port -------+---------------+--------+---------------------+--------------------
1067 error on service start
after a reboot the service will no longer start i have tryed starting from command line the port 7080 is not being used by anything else any ideas?
problem installing Oputils
I installed oputils. Now i see the service starting..and then stopping again. No screen appears. Any help available?
Config File Manager Reports?
Is there anyway to run automated reports that will email me if any device isn't backed up on schedule or if any device had a running config different from the startup config?
Can't change Timeout Settings
Hi, I’m running a trial of OpUtils 5.8 Build 58028 and would like to change the ICMP timeout in Settings but I can’t do it. The only ICMP setting that I can change is Packet Count, all the other settings can’t be changed. Thanks In advance João Paulo
Change transient date range
Is there a way within OpUtils 4 to change the date range that reports as "transient" and "available"? Rather than the default of 10 days, I'd like to run the available port report with a timeframe of 30 or 45 days, as that's more indicative of ports that are REALLY available to me. Thanks, Dan Bixby Boise State University Dan Bixby
Next Page