Account has been locked
When I tried to login to my ManageEngine OpManager, i got an error saying "Your account has been locked for security reasons. Please contact support with logs.". I didn't make any changes prior to this, so I was wondering why my account has been locked
[Free training] Learn how to secure IT from IP conflicts, rogue attacks, and switching issues with OpUtils.
Allocating and managing IP address spaces with homegrown tools is tedious and can often lead to IP conflicts, resulting in a loss of network connectivity and decreased productivity. Another setback of not managing and monitoring your IPs and switch ports
How to Add Static IP Address ranges to OpUtils
Is there a way to add ranges of static IP addresses to IPAM in OpUtils. For some reason I only see DHCP IP addresses. I have several subnets where the a specific portion of range of IP addresses for those subnets are being provided via DHCP then obviously anything outside of the DHCP range are used as static. I would like OpUtils to manage those IP addresses as well instead of just the DHCP addresses which for the most part manage themselves.
Problem to add witches to SPM
Hi Team, I tried to add a cisco switch to OpUtils Switch Port Mapper to monitor its port. I go to Network tab>IP management> switch port mapper and click on "add switch" button to add it manually or through discovery using SNMP v1/v2 credential. It takes
[Free training] Secure your IPs and switches from rogue access
Hello, IT admins! ManageEngine OpUtils is back with another season of free training on how to secure IPs and switch ports from rogue access. The training will help you enhance your network's IP address and switch port management strategies with OpUtils.
[Free e-book] 5 best practices for optimizing IP address management
Hey, IT pros! It's time to take a break from your hectic day. Grab a cup of coffee and a free copy of this e-book on 5 best practices for optimizing IP address management. Fretting over manual IP management tasks and data inconsistencies? Learn
ManageEngine OpUtils 12.6.130 Installation & Configurations related issues
Hi Team, We are currently trying an evaluation of ManageEngine OpUtils 12.6.130 for our environment. We are facing issues related to installation & configurations and would like to take the help of your support team to guide us and resolve the problems
[Free training] Save your organization from the hassles of IP address management
ManageEngine OpUtils is back with another season of one-day free training to help you tackle your network resource management challenges. Join our next session as we discuss how OpUtils helps you save your organization from the hassles of IP address management.
Infrastructure Engineer
Infrastructure Engineer Infrastructure Engineer's roles include being responsible for designing, building, implementing and maintaining the IT infrastructure using the latest technology. https://www.fieldengineer.com/skills
OpUtils - Stopping support for 32 bit installations
Dear Users, Please be informed that 32 bit installations will no longer be available for ManageEngine OpUtils. Support will be stopped for all 32 bit installations by September 30,2022. We request all users with 32 bit builds to migrate to our 64 bit
[Online training] IP address management and rogue device detection with OpUtils
Hello there! OpUtils is back with another season of IP address and rogue device management free training. In this in-depth training, we will be exploring the how, what, and why of seamless IP address management, switch port mapping, and rogue device detection
Apache Log4j for OpUtils Product
I have searched, but can only find information regarding OpManager. I run OpUtils, is this program vulnerable this Log4j bug?
[Free training] Making IP and rogue device management hassle free!
Hey there! Tired of tackling never-ending spreadsheet rows and the security threats of rogue devices? Don't worry, we've got you covered! To help you easily manage IP addresses and tackle rogue devices, ManageEngine OpUtils is offering live, online
Rogue Devices Auto-trust AD integration not working
We are trialing OpUtils and it mostly meets our needs. However we added our AD for the auto-trust devices in the rogue detection and it doesn't appear to work. The scan completes successfully but has only added 4 devices. It seems ManageEngine support
Group Hierarchy importing switches from CSV
Hi, I'm trying to import all my switches to SPM form a CSV File. My problem is that when I import them all switches are imported into the default group, ignoring the Group Hierarchy that I wrote in the file. For example: mycompany\\mynode\\mysubnode,switchname,
[Free training] Overcoming your IP address management challenges
ManageEngine OpUtils is conducting free, one-day training on IP address management. In this training we will be covering the best practices to monitor your network's IP address space, DHCP servers, and switch ports. We will also explore OpUtils' wide
Webinar featuring IDC’s Mark Leary: Make your IT operations future-proof with the Branch of One architecture
With the pandemic, the unprecedented need to support remote working drove several IT organizations worldwide to make drastic changes to their infrastructures. With band aid fixes and make shift solutions, organizations managed to retain business continuity
[One day, free training] IP address and switch port management with OpUtils
Hello folks! To help you tackle network resource management challenges, ManageEngine is hosting a free, one-day training session this June on OpUtils. Join us and learn how to effectively scan, monitor, and troubleshoot your network resources, and explore
[Free training] Simplify IP address management with OpUtils
Managing IP addresses can easily get complicated when it comes to dynamic networks and networks spanning across multiple subnets. However, effective management and optimal use of IP address space helps you avoid running into costly IT issues such as network
[Free training] Secure IPs and switch ports from rogue access with OpUtils
Rogue attackers might be infiltrating your network right now! Join us as we discuss how to optimize your IP address and switch port management strategy, and learn how to secure your network and handle attacks efficiently with OpUtils. Here's a quick
Error al iniciar el OpenManager
Buen día estimados, presento el siguiente error al iniciar el OpenManager. Agradecería me puedan ayudar, Saludos.
OpUtils - Security advisory regarding CVE-2020-11946
This is an announcement regarding a security advisory addressing an unauthenticated servlet call vulnerability fixed in the latest version of OpUtils v12.4.196. PLEASE READ THROUGH THIS POST COMPLETELY to check whether your installation has been affected or not, and if affected, learn how you can resolve it. Issue and description: Unauthenticated API key disclosure - There was an unauthenticated access method to obtain the API key that was discovered in the product. This could be exploited by
Switches not appearing on switch port mapper addon
When discovering switches using opmanager discovery the switch is being recognized and added successfully, but its not available in switch port mapper, why? Is there a way for the switch to appear when scheduling a scanning task in oputils spm. Thanks
OpUtils reports
Hello, How can we get a report that including information about the connected ports on the each switch along with the IP address, MAC address, MAC manufacturer? Please note that current version is 12.4.177 Regards,
Email Notification configuration - 12.3.218
I just updated my OpManager server to 12.3.218 and now I can't seem to update/add profiles for email notifications. it gives me an error when saving it at the end... "The input specified for the parameter fromAddress does not match the required pattern." I'm assuming this comes from the From Email Address field? It's the same address I used before the update but it doesn't like any email address I enter... nor any other text I put in the field.
IP Management
Hello, I'm not able to see the port view on a device although the OpUtils is enabled, and I'm not able to add a switch where all discovered devices are listed as Rough devices. Attached screenshots clarify this problem. OPmanager version is 12.4.177 Regards,
OpUtils approve subnet
Hello, I'm trying to approve subnet in OpUtils but I'm getting "Failure" error, please advice noting that OpManager version is 12.4.102 Regards,
IPAM in OPmanager v12
Hello, Does IPAM exist as a plugin in OPmanager v12 ? If yes please share with us a reference for that. Thanks,
[Announcement] Free, one-day OpUtils training on September 18th, 2019!
Hi friends, Are you tied to your network? Always checking its status and unsure if or when it'll create a huge mess? If so, then ManageEngine OpUtils may be just what you need. OpUtils training was a huge success last year, so we're continuing training into 2019. This in-depth and intensive training will help you tackle various challenges with your IPs and switch ports. Trust me, you don't want to miss it. Click here to register now! Here's a quick look at the topics we'll discuss: Introduction
Join us in Toronto for our first ever User Conference in Canada : 3 days of invaluable training, and fun networking!
We'd love to see you in Toronto for the ManageEngine User Conference from September 10 to 12, 2019. It's going to be three action-packed days designed to help you get more out of your ManageEngine experience - with an entire track dedicated to IT Operations Management, and individual sessions focused on the products you love. REGISTER NOW Here's what you can look forward to: Attend in-depth product presentations that cover everything from feature updates and how-tos, to industry best practices.
Join our free ITOM Dubai workshop and resolve your monitoring woes!
Save the date! Our IT Operations Management workshop is coming to Dubai on July 22, 2019. We have interesting sessions on monitoring that are aimed to help you meet your business demands.You can participate in the interactive demos of our solutions and learn how to get the most out of your IT while getting certified as an ITOM expert. You can connect with our product experts, make new friends and share knowledge. So, come discover how you can improve the performance of your IT.
IP address query and reporting for IPAM
I have an idea/question for the ability to filter/query and generate reports in OpUtils-IPAM. The reporting/filtering that exists is suitable for general use however it would be much more functional to have the ability to create reports/search based on user defined fields such as Alias Name, Asset Tag, and ESPECIALLY the "Custom Columns". We use the custom columns to identify what user has the IP address reserved. This would make identification of where the IP is used and who has it much easier.
OpManager stopped to collect interface utilization after netflow enabled
Hi my opmanager stopped to collect SNMP data from network device after I enabled netflow output to opmanager. have special settings to enable polling in opmanager? because I do not want all of interface to enable netflow output. Thank you. Code Chang
BREAKING NEWS : The free OpUtils webinar is on its way.
Hola Amigos! ManageEngine is conducting a webinar on OpUtils to help you with your network IP management problems. This training covers in-depth and intensive training which will help you get into the bottom of various challenges faced concerning the issues with your IP's and switch ports. Trust me, you wouldn't want to miss it. Click here to register now! The training agenda is as follows: Title of Webinar : Safeguard your network from intruders - Rogue Detection Here's a quick look at what
New Setup - Adding Device to Bandwidth Monitor
Hi there, I just set up OpUtils and am most interested in the bandwidth monitoring. I've added a simple device, a computer with one ethernet port, and for some reason OpUtils provides me with 35 different interfaces to choose from. Why is this and how do I determine which interface to choose from? I don't even have any wireless, vlan or vpn set up on this rig. It is, however, hosting the OpUtils server.
Attend our workshop, and get ITOM certified!
Save the date! Our ITOM workshop is coming to Dublin on June 11, 2019. During the workshop our product experts will walk you through the various challenges you might face while monitoring networks, servers, and applications. Register now Highlights: See interactive product demos Attend one-on-one question and answer sessions Become an ITOM Certified Expert Agenda: View the full agenda here Venue: Clayton HotelBallsbridge
ITOM seminar LATAM - Attend. Learn. Optimize.
Save your dates! ITOM Seminar is all set to take place in three main LATAM regions, this June. And best of all, it's absolutely free! Register now Dates and Venue - June 4th - Chile Intercontinental Santiago Av Vitacura 2885, Las Condes, Región Metropolitana, Chile June 6th - Argentina Hotel Panamericano Buenos Aires Carlos Pellegrini 551, C1009 Ciudad de Buenos Aires, Argentina June 11th -Mexico Sheraton María Isabel Hotel Av. Paseo de la Reforma 325, Tabacalera, 06500 Ciudad de México, CDMX,
ITOM London Workshop - Attend. Learn. Get certified
After globetrotting for the past few months, ITOM workshop is all set to take place in London on May 21,2019. You are guaranteed an action packed day with interesting sessions that will cover the latest trends in network, server, and applications management that will help you meet the ever growing business demands. Register now Highlights : Interactive product demos One-on-one question and answer sessions. Free certificate Agenda: View the entire agendahere Venue: Park Plaza Victoria London 239
Attend Philippines Workshop and get certified today!
Are you in Philippines, this May? If you are, come attend ITOM Philippines workshop and become an ITOM certified expert. Register now You can earn the certificate in 3 steps: Attend our sessions on OpManager, Applications Manager, NetFlow Analyzer, Network Configuration Manager, and Firewall Analyzer. Take a simple, easy test based on the knowledge gathered from the sessions. Get certified as an ITOM expert. Agenda: View the entire
Where is the History data under IP address information
When I look at an IP in the IP address manager there is a "History" field at the bottom with no data. Where do I enable this?
Next Page