How to see graphs for monitoring scripts?
Hi guys, I'm trying to use the new interface, but there I can't see the monitoring scripts graphs in real time as I can for out-of-box performance scripts. I can select it and it only gives me the option of deleting it. How do I do that?
Physical and Virtual servers showing different interface
Since updating to OpManager ver 11600 the interface for Virtual servers has changed. It looks like it is using the new API even though I have set it to use the old version. Physical server are showing correct, using the old API version. Also, under the Visualization menu tab, all the options are missing apart from All Devices. I have done a fresh install on a test server and the results are the same on there. Have the visualization options etc been removed or am I missing something. Thanks, Paul.
No EsxServers showing
I have managed to conenct the Esx Vcenter to de software. Alle virtual machines are discoverd and showing. Also the vcenter is showing but the Esx Servers are not showing. Must I enable something on the host like the snmpd service.
Monitoring DHCP services
Hi All, Am using OpManager version:11400 (64 Bit) and would like to know on how to enable DHCP services monitoring on one of the DHCP server and to generate alarm when the DHCP service is down.
Cannot Add Vcenter to VM Manager Plus
Not able to add vCenter 5 / ESX5i to VM Manager Plus; build 11600. Tried with different mode of credentials. Gives Cannot Add Device Failed Able to access https://<vcenter server IP>/mob
Interface not discovering for Cisco 2900 and 1900 routers
I recently installed Op Manager in one pc and added two router for monitoring purpose. But I am not able find interface details. I have done the rediscovery and deletion/addition. What could be issue?
Real time graph monitor for interface traffic utilization on new UI?
Hi there, OpManager build 11600 I think this has been asked before but can't remember where. Also, I used the Screenshot feedback but not sure if this is a one-way feedback since it didn't ask for my email address nor other details. Just in case... When using the old UI, I can get the real-time interface traffic by: go to switch details page click on Interfaces on each interface, I can click on the icon on the right-most column When using the new UI, I can't find this option anywhere. Anyone knows
Erase serveur
Hello everyone, I'm new in the community. I am trying to test the free version of OpManager to whether the product matches our needs. First, it is well. I miss him still some information. For example, how to remove a peripheral monitoring? I have clicked on "delete" and it tells me that it is deleted, yet I can not test the product on other peripherals, the maximum being reached ten. Pouver you help me? I exuse for my English. Best regards
VM Performance Monitor
VM Performance Monitor does not allow me to set "consecutive times" for monitoring? Is there a way this can be set?
OpManager URL Monitor TLS v1.1
Hi, We have hardened one Web Site, and as part of our security team recommendation, we completely turn off SSL v2 v3 and TLS 1.0. Couple of our URL monitors is failing now, not able to reach the website. Is there any settings that I could change to allow OpManager talks TLS 1.1 against that website. ?? Thanks,
Disk related monitor fir linux
Hi, I am not able to add disk related monitors for a linux machine. I tried deleting and readding the node already but it didnt help. Its being monitored through CLI and memory, CPU monitoring is fine. where as free or used disk space monitor is not getting added.
OpManager stops responding when I add WMI credentials
Trying to add WMI credentials. I set Name, Domain\Username and password. When I click Save the webpage with the modal window freezes and after a while the webbrowser tells me the page has stopped responding. When I refresh the page the credential is not added. Tested in Edge and Firefox.
ADMIN PASSWORD LOST
Hello, How can I restore the admin OpManager or change it? the password is forgotten and we do not have access since that Any Help Regards,
SQL EXPRESS 2008 R2 x OPMANAGER 11 --- FAIL
Good morning Mr. ,
I'm having SQL Express 2008 R2 database connection problems with OpManager 11 .
Is there any procedure to follow ?
Thank you !
How to monitor a Site to Site VPN on a Cisco ASA
We have two VPNs setup on a Cisco ASA 5525. We are currently using IPCheck to monitor the tunnels. We are looking to move away from IPCheck and I am looking into OPmanager to see if it can provide just a basic ping monitor for these VPN Tunnels. Thanks, Justin G.
Credential Hyper V
Hi, While creating a new credential WMI, I should give "Domain Name \ User Id" of an admin account or an user account is enough? Because when I add a hyperv host with an admin account it works perfectly but with a standard user account nothing (a normal device only is added) Please tell me if the admin account is must. Thanks
Opmanager problem
Dear , We are getting the below error message when we try to access ManageEngin. Please advise. I can't open OpManager throw web when we tried to open it using remote desktop we get the below : .\conf \ports.properties (Access is denied ) I tried to restart the services and the server and get the same , Thank you
Connecting MySQL database of IT360 / OPMANAGER from remote host
Greetings, Please help me on the below; Connecting MySQL database of IT360 / OPMANAGER from remote host. Regards, Sathya
OPManager not starting up
We had issues with our OP Manager server today. After restarting the service it hangs at start up. After reviewing the Wrapper log it get to ( details below) and does not go any further. STATUS | wrapper | 2015/08/18 22:16:30 | Java Service Wrapper Professional Edition 64-bit 3.5.15 STATUS | wrapper | 2015/08/18 22:16:30 | Copyright (C) 1999-2012 Tanuki Software, Ltd. All Rights Reserved. STATUS | wrapper | 2015/08/18 22:16:30 | http://wrapper.tanukisoftware.com STATUS | wrapper | 2015/08/18
Import CSV File into OpManager
Hi, I have a many devices (aprox 2000) and all of the devices must connect with google map, and i want to import them (csv), but i dont know the fields that containts longitude and latitude, for now i just know DeviceName, DisplayName, and DeviceType fields. does anyone know the fields that containt the longitude and latitude for the google map? Thanks
Close incident when alert is cleared
Greetings, I've been told that OpManager has the ability to close the incident generated by an alert when the same has been cleared. I'm using ServiceDesk 9.0 and OpManager 11200 but the incidents opened by alerts in OpManager remain open until we take manual action. Could you guide me on where should we configure that? Attached a screenshot of the current config. Thanks, R
OpManager fails to get CPU utilization
Hi, I have OpManager EE runing. I have all servers SNMP enabled. But OpManager is not showing the CPU utilization of my Linux server which is a 4 CPU server. memory,disk,etc... are ok..no problem with them.when i try testing the monitor it fails only for CPU utilization. any other SNMP configuration for 4 CPU servers? for other two CPU windows servers it shows the CPU utilization for both the CPUs. Rgds, Rajkumar
Memory Utilization Linux CLI No Longer Valid
Not that it was very accurate to begin with, but... The command /usr/bin/free -b | awk '/Mem:|cache:/ {print $2,$3}' | sed 'N;s/\n/ /' | awk '{print ($4*100)/$1}' no longer works on CentOS, assuming Fedora as well. The buffers and cache was removed on procps-ng-3.3.10 https://bugzilla.redhat.com/show_bug.cgi?id=1158828 How can I get Memory Utilization from RH systems where SNMP is not an option?
How to change temperature monitors to Farenheit instead of Celsius
Is there an easy way to change the values for monitors of servers and hardware to Fahrenheit instead of Celsius? The defaults are all in C and we want to see monitoring values in F instead. Latest build of OpManager.
Ovf template
what is the URL to get OVF template? Thanks, Sridhar
How to disable "Device Down: No response from device for last 5 polls"
Hi, How can I disable " Device Down: No response from device for last 5 polls" I need devices to be monitored, but I do not need information, if they are offline, for example desktop,printer during night. Notification profiles, makes no difference what I setup there, alarms escalation this same, removing network interfaces from monitored this same result. I need to see device green and get alarms when free space on disk is low, or network utilization is high and so on, but information about if
vCenter only?
Can I please request that in future we could also add just ESXi servers, and not just vCenter only?
OpManager V11.5
Hello, I must be overlooking something simple, but I cannot find out how to exclude a specific switch interface from polling in OpManager. In many cases on my switches I have ports that are administratively shutdown from the Cisco command line configuration. In OpManager these ports are reported with a status of "Critical" or "Trouble" How can I set these unused interfaces in OPManager so they do not report a critical or trouble status? Regards,
Specific Interface Monitoring
Hi Friends, I have Juniper 1440 device, which have more than 10000 interfaces. Apart from this 10000 interfaces, I need to monitor only 10 to 20 interfaces only. But the selective interface is not listed in MIB browser. * Here we are receiving only 1000 entries in the output. But we have more than 10000 interfaces * We need to monitor the below selective interface. But this interface is not listed in the above output. Please share your knowledge how to monitor this selective interface. Thanks.
CPU Utilization not monitored
I have a windows 2012 machine which I ma monitoring through WMI. I am seeing data for all parameters except for CPU Utilization. Any help on this ?
Windows OpManger SSH script
I want to create a script that we can execute when a VPN connection stalls. We monitor remote devices via VPN via their private IP, we have the public IP defined in the notes of the device as " Static WAN IP" Here is what I'd like to do. 1: On a missed poll I'd like to ping the private IP that is the primary IP of the device in OpManger 2: If that fails Ping the Static WAN IP we have defined in the notes 3: If that is successful then ssh to the VPN concentrator and clear the IKEV1 session using
URGENT PLEASE HELP : Unable to add windows server
Hi, I was successfully able to add some windows server for monitoring, however, 2 of my servers are coming under unknown category. These 2 servers are restricted and are in different subnet. I have my NOC team opened port 135 and 445 for WMI, but still I'm unable to add these servers in OP manager. FYI: I can ping, telnet these servers from the monitoring server. Please help me out with this.
vCenter v4.1 Windows - OpManager 11.6
Hi, I've just installed OpManager 11.6, clean installation. I have a VMWare v4.1 virtualization farm with 7 hosts 1 vCenter Windows 2008R2 SP1 I have a new VMWare v5.5 farm (4 nodes) with vCenter Appliance 5.5 I've successfully Add my vCSA 5.5, found 4 nodes, and a lot of VM's But, I've tried several times, different options to ADD the vCenter 4.1 (Windows) and nothing happens. It is another big disappointing with OpManager, with every release, so many BUGS, dealing with issues. Hopefully, get a
Monitor interfaces router cisco using ICMP
Hi everyone. I want to monitor 2 interfaces ( one is FTTH internet , one is leased line ). I've used Solowind to monitor that. Name IP status FTTH_LIne x.x.x.x Available LL y.y.y.y Avilable I plan to use opmanager instead of using solarwind. Can someone guid me how to do that. Thanks you. I've searched but cant know how to configure monitor interface using ICMP in Opmanager.
OPmanager monitoring service account privileges
Is their a document in place which can tell me what kind of privileges the service account should be given with for monitoring servers through op manager. For both windows and *nix platforms.
Devices without Notification Profile
Hi, I would like to obtain a list of devices that does not have a notification profile associated with. Below thread has a DB query which is not working on the op manager. Mine runs on bundled postgres. It will help if someone can provide me with a way to get this list https://forums.manageengine.com/topic/opmanager-how-to-find-devices-without-a-notification-profile
Alarms not correlating properly
We have extensive use of SNMP traps and constantly get SET's then CLEAR traps from time to time for things that fix itself. Our loadbalancer is F5, from time to time the remote end will disappear so it SETS a critical, but then there is another CRITICAL when it clears. I realize I can edit the trap processor to make the second a CLEAR but how can i get it to CLEAR the first SET? Here is a good example: 10.238.8.221 The trap is received from 10.238.8.221.The trap details are as follows , bigipNotifyObjMsg=SNMP_TRAP:
Traffic Flow Graphs for Fortigate 60D not updating in OP Manager
Hey Guys, I need a help with adding Fortigate 60 D firewall in OP manager. I have added it in OP manager with SNMP key authentication and everything was fine. It has discovered all interfaces and I can see the realtime traffic when I click the button available for Realtime Traffic after the interface name list But when I open a Interface and go inside it, I cannot see the traffic graphs ( Traffic - Today, Errors and Discards - Today, Total bytes Transferred - Today, Packets Per Second - Today,
Unable to Create Layer2 Map - No Credentials Available for Selection
I am running OpManager 11600 and when I go to "Layer 2 Maps" there are no Credentials available to select, it is just a blank box. Even though I have already defined SNMP, SSH and WMI credentials, and have already discovered devices and am actively managing them by their credentials. I've tried uploading a screen shot, but apparently the forum upload function doesn't work either (argh) ... So I've attached it instead.
snmpwalk custom link
Is it possible to set up a custom link that will utilize the mib browser in opmanger and populate the node info automatically?
Next Page