Monitor Mapped Network Drive
Hello All, I have searched the forums trying to find a way to monitor free disk space on a mapped network drive. I am able to monitor a local drive just fine, but when I map a network share to a letter, I cannot monitor it for free disk space. Is this at all possible in OpManager? The operating system of where the network drive is being mapped to, is Windows Server 2003. Thanks!
How Can I Monitor Network Drives (CIFS Shares) through OpMan?
We are having EMC NAS Storage. We have created CIFS Shares on the same. We want to monitor the Disk Utilization of these storage. How can we do that? Thanks, .::[ashX]::.
Lost left control panel under admin account
Hi, Silly thing but I've lost whole control panel on the left under local admin account in OpManager. It's fine under other users - someone knows how to bring it back? regular user: admin account:
Custom Report - Sys Description Cisco Devices
Hello, I need assistance in creating a custom report (trying to use the submit query feature using MS SQL). I need to find the IOS version of all of our Cisco switches inventoried in OpManager. I noticed this information is included in the Sys Desc. field on the device summary page. I can't seem to find this information using the ms sql query, i tried a few tables but am not sure where this information is stored. Any help or direction is appreciated. Thanks! I would like to have an ouput of Device
Nessus Scan showing "ManageEngine OpManager 'OPM_BVNAME' Blind SQLi and Reflected XSS"
Hi, When using Nessus and scanning our opmanager server, we are showing a high security alert "The remote host is running a version of ManageEngine OpManager that is affected by a Blind SQL injection vulnerability due to a failure to validate the 'OPM_BVNAME' parameter of the APMBVHandler servlet. A remote unauthenticated attacker can exploit this flaw to modify the application's database and potentially gain administrative rights. Though the vendor has released a patch to address this flaw, Tenable's
Windows Server 2012 R2 monitoring
Do anyone have a tutorial for setting up monitoring Windows Server 2012 R2 with SNMP? We have set up SNMP and we do get reply when using the MIB brower, but do not get any monitoring of hardware (CPU, memory and disk). in the web-GUI. The only monitoring we get is Sys desc.
Adding vCenter Server to VM Manager plus
Not able to add vCenter 5 / ESX5i to VM Manager Plus; build 11300. Tried with different mode of credentials xyz@cis.com -> Failed cis\xyz -> Failed Able to access https://<vcenter server IP>/mob Please let me know the solution for this, we are validating the VM Manager plus, if it meets to our requirements we want to buy Pro edition. Regards, Mahesh
Cannot Edit Thresholds 11600
In 11600 I am not able to edit threshold for monitors for any virtual devices. I usually use the CLASSIC view... instead of the API view... because for alert viewing... the API view is still a complete mess in my opinion... not nearly as neat/organized as the classic view... The problem is that now in the 11600 most of my VM's show up in the API view even when using the CLASSIC view.... So my problem is that the with API view The only option is to delete the monitor or leave everything as default....
Opmanager for HP iLO 3
Hi, I am trying to monitor information from HP ProLiant DL380 G7. It is using iLO v3 but i can't find any information to monitor this. I would like to monitor the overall health status, and particulary the disks. As somenone been capable of doing this? Thank you for your help! Laurent
Free Disk Space monitor not applying
Hey guys I've applied a working device template to several file servers, and while it has populated the CPU and Memory Util monitors, the Free Disk Space monitor refuses to show up. I've even added both SMTP and WMI monitors, and neither works for Free Disk Space. (please see attached) This is the Windows Server 2012 R2 device template, and it works perfectly fine on other servers, so it's clearly something up with these specific servers. Any suggestions as to what the issue could be? Thanks in advance!
Rearm Value Monitor Folder
Rearm value I enter is less than threshold value. I still get error message as attached. this is to monitor folder receiving constant files and process into database
Data Maintenance utility will not start
Hi! I'm trying to use the "Data Maintenance" utility to make a backup a backup of the data, so I can move OpManager to another server, but the utility will not start. No matter what I try, nothing happens when I start it. On the newly installed server, it starts fine. The "DB Configuration" utility does start and OpManager runs without a hitch. Anybody any idea what to try to get a backup of the data, which I can restore on the new server? I'm running build 8811. Help is welcome! With kind regards,
Interface status monitoring
Hi, Is there a way of supressing/disabling interface status monitoring so that we can add our own monitoring conditions. Our switch interfaces are up and down regularly through devices such as laptops being added or removed from ports. We dont require an alert/notification of every instance of this, however we do wish to monitor particular switch ports which we could setup ourselves on a port by port basis. Cheers
Configure OpManager with ASA multi context
Hi, I want to know how can i configure SNMP monitorization in an ASA with multiple context. I can configure my ASA in single context without any problem.
How to change value displayed?
Hi, I want to monitor a UPS Device but the data from monitor "Current" display a value inconsistent and i need to divide between 10 for have a value correct. How i can do it?
OpManager Enterprise Probe Communication with central Down
Hi, We have the OpManager Enterprise Build 11600 , and we have installed in our customers two probes and one in our office . All the probes showing the follow problem : Simply loses communication for no apparent reason . No problems on our network or internet service. And the worst is that every time this happens , I always have to restart the probe service on windows to recommunicate. I have not found here in the forum something about it. The photo I sent up , is a server that is in our network
OpManger Restore backup Postgree to MSSQL.
Hi, I installed our OpManager with database bundle (PostgreSQL), but now I need to change to MSSQL. I followed the steps to change database and all right. But... When I will try to restore, shows me a follow error: C:\ManageEngine\OpManagerCentral\bin\backup>RestoreDB.bat C:\ManageEngine\OpMana gerCentral\backup\Backup_Pgsql_Feb12_105500_11600.zip ******************************************************** * Warning!!! Attempting to restore the data !!! * * This will result in loosing your
How safe to delete interfaces
There are many interfaces showing under interfaces tab I use only few of them where RX and TX traffic is on. The rest of the interfaces are showing offline with 0% traffic. How safe it is to delete not use interfaces?
Virtual Microsoft Windows 2012 r2 clustered installed SQL server (High Availability) monitoring by Opmanager
I have virtual Microsoft Windows 2012 r2 clustered installed SQL server 2012 (High Availability) monitoring by Opmanager. Issue Opmanager shows only one of the server online and second server status shows as critical while both of them are online and running If I restart offline server status change on op manager first server goes offline and second server status updates from critical to online for some reason opmanager is detecting only one server as an active server
OpManager Enterprise do not Integrate with Service Desk Plus MSP.
Hi Friends, Recently acquired OpManager Enterprise Edition 11600. We had already bought months ago Service Desk Plus MPS. Now I am having trouble integrating the two tools. I have read many topics open for other people who have the same problem and still could not help. I've tried everything. Until finally I got to the point of carrying out the settings in the SDPMSPConfig.xml But without success. As the picture below is my config file, do not know whether it is configured correctly or not (help
Tell us what you are using the system data center monitoring sensors
Hello! Tell us what you are using the system data center monitoring sensors (temperature, humidity ....) and how they work together with opmanager. Advise what to choose.
Identify Currently Logged On Users
I have followed the document for getting this working, and I still don't see the logged on username attached to an IP address or switch port. Is there any troubleshooting I can do for this? Which port does this use to communicate with the OpsUtil server, so I can check the local FW? This is the response I receive when I run this from the CLI: [Http::PostHttp()]->WinHttpReceiveResponse ErrorCode :12152
Ricoh Printers
I was wondering if anybody know where I can download mibs for ricoh printers any model. I have searched all over their website but couldn't find none. I know there was a section where you could download mibs for there printers a long time ago but I don't know where they moved it to. Thanks
SNMPv3 consistently fails on to query APC UPS
The most consistent error I get is privProtocol and privPassword may be wrong. But they are not. I can't find in the powernet417.mib where I can put those in and just have them in the device with SNMPv3 enabled and everything set up. Same username and passwords are used in the OpMgr SNMPv3 credential I created. It's found just fine using SNMPv1 but v3 consistently fails. Any suggestions would be appreciated.
Issues running script
Hi again, Following my last topic, I'm now pursuing a script that is allowed on every server. The previous script had: Set objTaskService = CreateObject("Schedule.Service") objTaskService.Connect("servername.domain.com") Set objRootFolder = objTaskService.GetFolder("\") Set objTask = objRootFolder.GetTask("Cleanup") objTask.Run vbNull This ran with no issues. Now, I'm trying: Set objTaskService = CreateObject("Schedule.Service") objTaskService.Connect() Set objRootFolder = objTaskService.GetFolder("\")
Security context for running Workflow scripts
Hi everyone, I'm currently developing a workflow that analyzes drive space for servers, and if it is over the limit, I'm running a windows script that goes to the server and deletes a specific folder structure. The way I'm doing this is by having a vbscript, that calls a Scheduled task. The scheduled task has a batch file provided by our software dealer, that deletes the unnecessary files. Our Opmanager server is in the top level domain of our company. The application servers are in a child domain.
Disable/Enable switch port
Administrative Status "disable" What does this button on a swiitch port, will it bring down a switch port. Will this all so works on HP switches?
Performance Matrix Template fpr Hyper-V Manager
Is there any matrix template/sample I can download for Hyper-V performance counters?
Hyper-V no data for VM
Hyper-V hosts can retrieve data (CPU, RAM, HD utilization). But no data for VM. Is any setting need to apply on Hyper-V Server?
Monitor Virtual Host or Virtual Machine resorces
I am setting up monitor counters for Hyper-V virtual host. There are multiple virtual machines under host. If I select counter for "Hyper-V monitors" does it monitor virtual machines? Or I have setup separate counters under for virtual machines. --Screenshot attached
OpManager Availability Report
Sir, I'm a bit confuse with availability report in OpManager. 1. I generate report for last month availability which is December. As we know, December has 31 days but my reporting show only 23D 1H. 2. What each field in reporting means etc On Hold, Maintenance, Dependent Unavailable.... does it consider as down time? 3. How is the availability being calculate? What is the formula?
SNMP Traps - Descriptions aren't importing
I imported SNMP traps from Ruckus, NetApp, and Palo Alto MIB files; however, I noticed that none of the descriptions are importing. Is this normal? Is there any way to get around this? I'm using OpMan build 11500 Thank you!
Unable to Access jarfile .\classes\OpManagerStartupClasses.jar
Dear All, I m not able to access my ManageEngine OpManger and below error is the screen shot of that. Tried updating java as well but same java virtual machine launcher issue continues. It was working fine earlier, all of a sudden happened, any suggestion to come out of this. Thanks & Regards Mohamed Irfan
Add device failed.
Hi I'm running a trial of VM Manager Plus and get the following error when I try to add our VC Add device failed. Thanks
OpManager generating 4625 errors (Unknown username or password)
Hi, OpManager is generating 4625 errors (Unknown username or password) on some of our servers. It started on Friday. We can't find any changes made to the network that would cause this. All the servers pass the credentials check. If I make the server unmanaged the alerts stop. I'm not sure where to look to find out what OpManager is trying to do. Any help would be most welcome. Best wishes Michael
Monitor log file
Dear Expert, I am researching OpManager, i want to monitor log file on Window and linux server so do i need to buy the license for monitor log file or i can use license Devices Pack for monitor log. Thanks, Rgds, Tutv
garbled characters are displayed when recieving SNMP-Trap from AS400
I added AS400 servers on OpManager 11.6 and set up SNMP-Agent on AS400 to receive trap messages from AS400, but when I get SNMP-Trap messages, garbled characters are displayed . AS400 is using EBCDIC character code in trap message, so I guess this caused the garbled characters. Do you know how to resolve this problem?
Problem web interface
Sometimes Web interface does not respond, it is necessary to restart the service to return to work, any suggestions?
AD Account for OpManager and other Manage Engine Products Locking out
Below is all of the details - my question is how do I find in OpManager where someone has "manually" entered the credentials for two accounts in my active directory and now after a password change the accounts are locking out from this server, verified through looking at event id 4740 on PDC Emulator. I have a server 2012 running OpManager version info below: OS Name & Version : Microsoft Windows Server 2012 Datacenter OpManager version : 10100 (64 Bit) Working Directory : C:\MANAGE~1\OPMANA~1 Database
reset admin password OpManager 8
Dear Support team I just receive respond role to our ManageEngine OpManager 8 ( install on windows 2003 r2 server ) from previous guy, but he give me only user that can view, can I reset admin password for these server, please let's me know how to do it
Next Page