exchange monitor
hi Dear I need a software for monitoring exchange and give me information a bout send&recive mails please help me
How to show BER value correctly on BER Performance Monitor?
Hi OpManager Support I have BER monitor setup in OpManager Build version 11600, however, it is not showing correctly when the data is polled. Instead of showing, 0.000001, it is displayed as "0". The MIB Browser shows the OID string output the results to "0.0E-10" and using the Add New Monitor, in the Functional Expression, it can be changed to "StringToNumeric" which is currently setup to. However, the Test Monitor shows the values as "0". Is this a bug or design ? Is there's another way to display
Active directory service monitor
Can someone advise how I can mass edit the ad service monitors to be consistent? Devices under the category domain controllers have monitors turned on that we no longer need r are configured outside of what we want to set them at.
Dell N2024P and N2048P cannot monitor
Hello, I have about 40 Dell N2048P and 2 N2024P switches and they are not discovered as switches (OpManager states: server). When I change it to switches it accepts it, but all the monitors are not working properly. I see that model N2024 nor N2048 are present in the list of available devices. What do I do? Thanks
OpMan/AppMan Central not linking probes
Hey there So I've setup new OpCentral and AppCentral probes and wanted to link the various OpMan and AppMan probes to it, but cannot seem to do so. I remember with v11 it automatically registered with the Central server upon installation, but that seems to have changed. Please see attached screenshot and advise. Cheers, Mat
Generate Device Template from MIB
Hi, I was wondering if it is possible to create a device template from a MIB file? Sure, I can create a custom device template adding all the OID's by hand, but it would be nice to have OM create all the monitors from the MIB file. Is it possible? Regards, AJ
Error in SNMP polling Barracuda Spam Filter
Hi All, I'm trying to create a device template for a Barracuda 600Vx and have some issues with the polls. Using the MIB browser I get an error stating: "Request failed or timed out. Response PDU received from **.**.**.** Error Indication in response: There is no such variable name in this mib. Errindex: 1". If I use Paessler SNMP tester I get a correct response using the same OID. After a Wireshark trace it seems that OpManager is adding a trailing .0 to the OID. Paessler is querying .1.3.6.1.4.1.20632.2.3
Migrating from PSSQL to MSSQL error
We are in the process of migrating OpManager 11.6 to another server. We are migrating PSSQL to MSSQL before the migration. When we migrate from PSSQL to MSSQL we get the attached error. We deleted the previous SQL DB, so this is a migration from scratch. We are using the instructions from http://help.opmanager.com/migrating_database Please do not send me the same 5 links, we have them all, and read through them all numerous times. We are stuck at part 5 which I highlighted in red. We click Yes when
Talk ITOM : Free training on OpManager | December!
Talk ITOM is a free webinar which occurs every month to help those of you who seek help in start using OpManager. This will help you get hands-on with the different modules of OpManager. Register to enroll in the webinar, scheduled for the 21st of December in two different time zones. We'll send you the link to join the sessions before the scheduled date. The webinar's Agenda includes: 1. Network
SNMP v3 switchport mapper
I am running version 8 of opsutil and struggling adding switches to port mapper via snmpv3. I see the requests coming into the cisco switch, but seems nothing ever goes back out. I know the snmpv3 creds are working because I have another app polling from these devices and working just fine. Anyone have issues with this?
Interfaces on Windows objects (unmanage or remove multiple at once)
So there are tons of interfaces on a Windows Server or VM automatically included and monitored when discovered. Is there a way to mass disable the monitoring so only the primary NIC(s) are actively monitored? Manually going through one at a time and choosing Unmanage, Configure -> Disable or delete is a huge pain. Also noticed that under Status Poll details, the option to Disable status poll details is visible, but greyed out. It would be easier to have them unmanaged/disabled by default and only
BackupDB.bat stuck
We are preparing to upgrade OpManager 11.6 to 12.2 and I'm running BackupDB.bat on D:\Program Files\ManageEngine\OpManager\bin\backup. The backup starts to run but gets stuck at one particular table, I let it run over about an hour. The OpManager service was running when I initially started the backup. I have tried stopping the OpManager service, as well as closing Java and Wrapper service. It seems to get stuck at the same table every time. It moves very quickly up until this point. Has anyone ever
SPM/IPAM Setup
I am trying to set up the SPM/IPAM since I have the licensing coming in sometime today. The issue I have is this. There is no way to add items to groups that are not listed. Then what is the proper way to configure SPM/IPAM to start getting the detailed information and start producing reports. Daren
How can configure NCM
Hi, I recently made the upgrade to version v12.2 of OpManager. I would like to know how configure the credential for backup Cisco configuration on NCM. I need the parameters for TELNET / TFTP Protocol on "Apply Credentials" Options - Primary - Additional I try but not work. Thk soo much
Cannot integrate ServiceDesk Plus with OpManager
OpManager version: 11500 Servicedesk plus version: 9103 I'm using self-signed certificate for OpManager and 3rd party valid certificate for Servicedesk plus both running https. I followed this article to set up the integration; but I encounter an error asking to check if ServiceDesk service is running Please help me get the integration working. Regards, Alireza
OpManager unable to select partition detail of device (%) via SNMP protocol
Hi, OpManager version 11 installed currently My server SNMP traps and SNMP credinatals are properly setup. And servers able to rediscover / update the status through WebGUI. But I unable to see the "partition detail of device (%) via SNMP protocol" while I want to add new monitor. Any idea?
Cannot find deleted template
Version 12 of Central with Probe (Enterprise I believe) - So I made a new device template, Windows 2012 R2 server, and associated it with MIB .1.3.6.1.4.1.311.1.1.3.1.2 and tried to assign it to a couple 2012 R2 servers. I couldn't get any monitors to report back anything in inventory afterwards though, so I deleted the template and tried to re-create it, but I when I do, I get the following error: .1.3.6.1.4.1.311.1.1.3.1.2 OID is associated to [Windows 2012 R2,] Templates. Configure Custom OID
V12.2 - Many functions no longer appear
Oi. Muitas funções não aparecem mais ... Esta nova versão do OpManager é falta muitas coisas importantes quando o servidor for selecionada; serviços Windows monitorizada por servidor. Serviços como: FTP / Web / SQL / Active Directory Layout com contadores AD / SQL Entre várias outras coisas que são difíceis de encontrar. A aparência é muito bonita, mas é muito lento também. Gostaria de voltar para a versão antiga ... porque infelizmente há muita falta.
Monitoring systems that use DHCP
Is there a way to automatically update IP addresses on machines that use DHCP, or change IP’s for other reasons? It seems like once a week I have a device reporting as down, because the IP has changed. I know I could change some settings to go by name instead of IP, but I don't think we want to go that direction either.
ManageEngine Support is experiencing a slowdown
Dear Customers: Some of you may have experienced slow customer service over the last 12 hours or so. Yes, we have an issue and I want to give you an update. A severe cyclone Vardah hit Chennai on Monday, December 12th and passed over the city. All offices and schools in the region remained closed. ManageEngine’s Chennai office was closed yesterday, with the exception of our customer support staff who came in before the storm hit. Customer support has been spotty as communication links have been
Increasing Heap Size on NCM
Has anyone have issues with the low heap size on NCM? It's showing me it uses about 600MB while it only has 100MB heap size. I tried tuning the heap size by executing the -Xms and -Xmx commands but it looks like it needs to point to a certain java "object" (or script? not that familiar with JVM). Wondering if anyone have any experience tuning the heap size and can share the command line they used. Thanks
third party ssl on 12.2
Hello, How to enable third party ssl for opmanager ? No old tutorial apply anymore. there is no file "ssl_server.xml" file (under OpManager_Hometomcatconfbackup) Where to edit tomcat conf now ?
Trap Processor
Hello i'm triing to edit a trap processor for a new trap, i set some values in mach critera and i save it. But when i open the trap in monitors this values are not present/saved. How i can solve this issue ? Regards Rocco
MAP New issue
In the Map section new issue In the map view I see 8 devices, in the list view of the same map I see only 5 devices!!
Switch Port Mapper not reporting all ports on switches
I am seeing mixed results with my switch port mapper not reporting all ports that are active/nonactive on my switches. Some switch stacks are correct and others are not. ANy advice on what to check?
V12: How to log a ticket in ServiceDesk Plus when a fault is detected in OpManager?
Web Server port occupied
Is there an issue with this version v12? I installed the latest version (free version) and I keep getting the WebServer port is occupied. No matter what port I use i get the same error. I have reinstalled the software a couple of times and it works initially but after a while it stops working again.
opmanager v12 MIB import
Hi, I am trying to add some MIB's for ubiquiti wireless devices but i am having some issues. I have copied the MIB files to opmanager/mibs but when i go to add monitor > snmp > from MIB the mib files are not showing up, is there something else i need to do to import them? v12 doesnt seem to have alot of documentation for it.
OpManager not displaying the correct model for my devices.
Hi there, Im having issues with the OpManager deployed at an enterprise. The issue is that, i have OpManager running and monitoring the switches at an enteprise, but the OpManager is not displaying the correct "model" for the switch that Im monitoring. I have Cisco Catalyst 6500 series WS-C6509-E running and monitored by the OpManager, however in the EOL/EOS report that was produced, the OpManager displayed the switch as "6500 series 6509" which is different model than the switch running. The question
OpManager Enterprise Windows: Unable to start service
Hi, I have recently installed a fresh version of OpManager Enterprise with MSSQL backend. I've tried running reinitlizeDB.bat - but the same error occurs after restarting. However, it fails to start the service, this is the latest rows from serverout_0.txt: [13:56:12:359]|[12-02-2016]|[com.adventnet.persistence.xml.XmlParser]|[INFO]|[17]: Going to parse the XML :: [file:/C:/MANAGE~1/OPMANA~1/bin/../conf/Persistence/error-codes.xml]| [13:56:12:389]|[12-02-2016]|[com.adventnet.persistence.PersistenceInitializer]|[SEVERE]|[17]:
24 hour time in OpManager
How do I configure OpManager to use the 24 hour clock instead of AM/PM? Cheers, bt
Increase Browser memory
Hi There I don't know why but everytime when I use the OPM After 1 hr that I use it i have to close and reopen the tab, cause the page start with about 300Kb of memory and when I close the tab is about 1.3Gb...and I can't work cause everything is really slow. Please Can you let me know about that? Thanks Just using Chrome last version
vmware nsx support?
Is there any plan to support VMware NSX monitoring?
Flow Monitor not working
I'm trying to get flow monitoring working on our switches. I've enabled it on the Dell switches, tested this with wireshark and sflow traffic is coming into the server. But I can't get any information to display in OpManager. Is there something I need to install? I can't find a plug in anywhere on the website.
Backup Conf 3com Switch
Hi There I have a problem , in some switches I can't find the 3omoscfg.def file...so when I try to backup the config I receive this error: ftp "ip server" put 3comoscfg.def 946_ConfigFile.txt Unable to open local file. Directory of unit1>flash:/ 1 (*) -rw- 4189701 Feb 29 2008 12:00:00 s3n03_03_02s168.app 2 (*) -rw- 956854 Feb 29 2008 12:00:00 s3p04_00.web 3 (*) -rw- 10798 Sep 10 2005 03:22:38 3comoscfg.cfg where can I find this command in the NCM device template to
Changing NetMask of an already discovered network
Dear Sirs,- We are currently evaluating OpManager and so far it is very impressive. We have already added and configured quite a large number of devices, by manually adding them. Only now are we starting to look into "Networks", and have quickly discovered that one of our main networks was already discovered, but is registered with a wrong NetMask. This network contains the bulk of our manually added devices, which we would very much like to avoid loosing. Is there a way to change the NetMask on
Custom Dial
Hi There I wish to add custom dial with Fan Status I found the OID Object : .1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.19.10 In the MIB browser works fine: h3cEntityExtErrorStatus.10:-->fanError(41) When I add the monitor in my device template how can I add in the units field to see the status like an error? If I add % I see the status green with 41% value Thanks
NCM Telnet custom Port
Hi There How can I create a NCM Telnet credential access with different port than 23? Thanks
Monitor Admin User's Activity
Dear Support, We need to know on how to monitor admin users activity specially when there is an unauthorized unmanage of devices. There is a certain log that we can look at? Please assist. Thanks, Ryan
OpManager 11600 SSH monitoring "no matching key exchange method found" on client
Is anyone else getting "no matching key exchange method found" in their Linux monitored devices auth logs? I believe recent versions of OpenSSH come configured with Logjam protection enabled which takes away the only method OpManager had of SSH'ing to devices. Does anyone know how to get OpManager to step up the methods it uses to talk to an SSH service? I don't believe in crippling security just to get monitoring going again so I'm not considering degrading the settings on the monitored device.
Next Page