jMeter
Does anyone have information on how I might integrate jMeter results into OpManager?
OpManager 12 monitoring HP 3PAR SAN
Hi, I am trying to monitor a HP 3PAR SAN and while I can get it into OpManager I only really get basic monitors. Does anyone know if there is a way to get the proper in depth monitors that OpStore used to have? Thanks Tim
OpManager Application Manager Plug in Trick
Hi, I would like to ask if there's a way to know the build number of my Application Manager without logging in the AppMan Plugin.
OpManager unable to obtain CPU, ram, disk utlization
OpManager unable to obtain CPU, ram, disk utilization on AIX servers using SNMP We unable to setup CLI on our AIX servers due to security policy. Please advise whether any alternative methods to monitor CPU ram disk utilization from AIX servers.
Display Raw Data from Custom Script
Good morning all I have imported a custom script to OpManager 12200 to display the Up-time of each machine. The script works well and pulls back the requested data however i am actually struggling to display the information in a readable format. I would like to display the data in a dashboard but the only widget i can find to display the data is "Top N Monitored Values of a Performance Monitor" Which gives an average. Is it possible to display the raw data that is returned from the script
Custom pages to display "Top 10" CPU/Mem/Bandwidth?
Hi. I need to create a page to display on a big TV on the wall that shows the worst offenders in terms of CPU/Mem/BW. Specifically a bar graph or similar to show at least some historical data, a la Cacti, so we can spot problems looming and know if any spikes are anomalies or if an upgrade is warranted. Is this possible? I can't find anything on it. I can drill down to CPU usage for example, but I need it super obvious. No clicks, just right there.
The issue of Passthrough feature in OPM
Hi All, Recently we tested the Passthrough feature in OPM with version 11600 in lab, then we would enable the feature in our production environnment(Central-probe). According to the userguide, it is fine until enabling the passthrough option, and the browser has poped a window to login for authentication. Actually, my broswer has been set to trust the site to avoid the popup window before enabling the option. Then I have tried to enter the opm server account/opm account/the computer
Inventory empty
Hello I've run discovery lots of device were discovered (I received email report) but nothing shows in Inventory. Anyone had this kind of issue?
Integration of OPManager With Service Desk
Dear Team We have integrated Opmanager with service desk to logs call automatically in the servicedesk. At present calls are getting logged ,But only some of the calls logged get closed while some are opened . Its true for Appmanager also . While Network calls get logged and close regularly while server or appmanager call are not closed. Can someone update on the parameters on which call get closed. Regards Manish
Java Binary Causing High CPU
Hi, I am running OpManager build 12200. My host machine for OpManager has been operating well for the past three months since it was installed, but all of a sudden in the last few days CPU utilisation has been a near constant 99%. The culprit is the Java (TM) Platform SE binary process which is also using about 800Mb of RAM by itself. My system resources are: OS - Windows Server 2012 (VMWare guest) CPU - Intel Xeon E5-2660v2 @ 2.20 GHz (5 processors) RAM - 9 GB HDD - 500GB I upgraded the the JRE
use work flow to move logs to a different destination server
Is It possible to use work flow to move logs off 1 server to a different server for storage?
IPSLA WAN monitoring on Cisco Nexus 7710
Hi, I'm trying to configure WAN IPSLA monitoring between Cisco Nexus switches. On the IPSLA sender I've added the following configuration: IPSLA sender feature enabled snmp-server enable traps ip sla snmp-server host [OpManager_IP] traps version 2c private On the responder I have "IPSLA Responder feature enabled". SNMP community is providing RW permissions. Both devices monitored with OpManager. No ACLs or firewalls are between OpManager and IPSLA sender. Destination IP is available. OpManager IPSLA
Custom Report Period (remove days)
Is there a way for a monthly availability report to be able to ignore certain days? For example, If maintenance is done on Sundays, how do we run a monthly availability report that ignores Sundays? Thanks!
strange threshold condition in custom monitors
Hi, we are monitoring Checkpoint firewall using the latest MIB from the vendor. When adding some monitors from the mib, we cannot set the threshold conditions to be "<", ">", the only option is "Contains". How can I change the conditon type?
Monitor VM performance
How to monitor VM performance values such as memory and CPU using only the Vcenter credential in OpManager?
Monitor JBOSS
How to monitor a JBOSS application with OPMANAGER?
monitoring linux memory usage in opmanager
Hello I have a problem that i need to monitor centos 7 available memory As you can see below As I calulate then it isn't 68% as opmanager shows below but it is what top % shows below But opmanager shows the same thing that htop shows as you can see below: But the thing is that htop or opmanager doesn't show precisely the memory utilization. How can i monitor command free -m Available mem with snmp? Here is also the output of cat proc/meminfo
URL Monitors not working after updating iDRACs
Hello, I recently updated all of our DRACs and have noticed that the URL monitors for these sites are now coming back with the error: The URL https://172.20.11.6 is down, Reason : Host Unavailable I have logged onto the server that hosts Opmanager and am able to reach these pages fine so I'm not sure why the monitors are reporting that it is down. Our Opmanager build number is 11600 Kind Regards, Ryan
import data to OPmanager from opendcim
嗨，大家好 之前使用opendcim來管理我的服務器數據 我想將我的服務器庫存信息導入opmanager 怎麼做 ？？
Failed. Please select the correct version of WebLogic Server. On opmanager.
Hi, I'm trying to monitor weblogic with opmanager but we get this as an answer: I already uploaded the .jar required but we still get the message, Any ideas of what I'm missing? Thank You
OpManager Integration with SUMMIT ITSM or with ServiceNow
Hi Team, Can we integrate OpManager with 3rd party helpdesk tool to create incident in those tools for critical alarms generated byOpManager. Product :- OpManager Edition :- Enterprise Version :- 12200 Database :- PostgreSQL Regards, Onkar M
OpManager Brocade SAN Switch Module
Hi, I added Brocade SAN Switch , I tested SNMP Credential it is okey but the monitor is not show data about switch. System description, packets etc.Screenshot of the monitor is added. What can I check for better monitor? Thanks for helps, Seda
VM Monitoring
Is anyone experiencing problem with VM monitoring via VCenter? I can not, neither through Vcenter nor through ESX.
Hp Blade c7000 Enclosure
Hi All, We have C7000 enclosure and less than 50 rackmount DL series servers, already hp-sim in place for providing any hardware failure on system, Objective to replace hp-sim by opmanager why i follow two monitoring tools make it central one I already go through the below link but seems no luck to get the template https://forums.manageengine.com/topic/hp-blade-center-monitoring kindly advise if some one has already template for this blade so we are ablt to monitor Regards Adnan
After Upgrade 11.6 to 12.2 NCM backup not works
Hi, after upgrate opmanager 11.6 to 12.2 NCM not works. if i try to check credential, always appears the same error, look attachment. I don't change credential from previous release. if i try to connect by terminal icon, all work. this for all devices. thk
Disable AutoDiscovery Vmware Vcenter
Hi, i need to disable VM Autodiscovery function on Vmware Vcenter. is it possible ? thk
HTTP Status 400 - Invalid direct reference to form login page
Hi, as mentioned somewhere else - we have a OpManager v12.2 in distributed mode. It is very fresh installation, based so far on 3 servers: 1 Centrall application server, database server with MS SQL 2014 and a probe server. All of these is Windows 2012 R2. I have noticed that after installation of the Central server and restart of the service (ManageEngine OpManager Central) we have an issue with accessing the web application. It shows the login screen, but just after that there is an error screen.
Correct installation of OpManager and probes
Hi, I'm having some troubles installing OpManager with 1 probe. First we have installed OpManager Enterprise 12200 on a Windows 2012 server (language italian), now we need to add a probe server and installed on a linux CentOs server: 1) If the main OpManager was installed as standalone, how can I add a probe? 2) I've installed OpManager Central Enterprise on a CentOs server for testing and checked that the configuration menu is different between the 2 installations; on the first installation (Windows
ERROR CODE : 496 Invalid license file
Hello, I've got installed OpManger v12.2, central and probes server. I have applied license file to the central server. It is very fresh installation. Today I was trying to do something on the probe server, and the service has just crashed, now I can't start it, as there is a message about invalid license file... Starting Server from location: D:\ManageEngine\OpManagerProbe ERROR CODE : 496 Invalid License File Any suggestion what can be wrong with the installation?
Mail Server Authentication failed
I have recently install OpManager and and when we are using Office 365 for our exchange services. When I tries to setup the Mail Server Settings I get the error "Primary: Mail server authentication failed for smtp.office365.com. Please check your user name and password." (https://gyazo.com/f5025412b54b7ff5ea9dc4a08b9a7497). After researching this and reading many posts, I have restarted the OpManager service on the server, reset the password, logged into Office 365 as the user and verified that password
Reduce database size
Hi I'm using Opmanager 11 with SQL Server 2014. My data is 40 GB. How to reduce data size or truncate data remain 30 days for the last. Thanks.
Our Manage Engine Server crashed. We have rebuilt the windows component and attached the old drives to the new machine. How can we import our old data and settings?
Our Manage Engine Server crashed. We have rebuilt the windows component and attached the old drives to the new machine. How can we import our old data and settings?
Dashboard Templates
Hi, I think it would be great if there's a feature, that provides dashboard templates. If you have to create lots of dashboards with the same structure, a pre-built template would be a strong help and would save a lot time. My second idea is the opportunity to select more than one widget of a kind in one creation process. E.g. if you have to create a dashboard with 12 "Custom Text or HTML" widgets, you always have to create one, click "Add" and do this process twelve times. It would be easier to
Availability report
Hi, How can I generate an availability report for a business view and display the availability in a single value for the business view in general and not for each device in that view. Thanks
Auto-Discovery of Devices
Hi, We have ran an auto-discover of all of our network devices and deleted what we don't want to monitor but these devices keep coming back into the list of devices. Is there a way to turn off auto-discover after you have completed the initial network scan?
WMI-based resource monitor is not showing any data of CPU Utilization
Dear Support, We have encountered a problem when I use WMI to monitor the CPU Utilization of Windows server 2012. We have checked the credential and try to run the cpu.vbs and getting error. Please help to diagnostic what is the problem is and the solution. Current use : OpManager 11 build number 11500 Many Thanks Kidd Attachment 1: Attachment 2:
Add Syslog alarms
Aloha, Im a new user to OpManager. Currently I am evaluating different NMS applications. OpManger is one of them. I dont see in OpManager how, if the OpManager get Syslog messages. but I see with tcpdump, that syslog are send. So why is OpManager not showing me, Syslogs? Thanks Marcel
Process Count Script
Hi Team ; when i try to get process count of the local machine where the opmanager is installed it gives error credential not given. when i tried to give credential for a local machine it gives message "user credentials cannot be used for local connections" can i use process count monitor for local machine ? Thanks.
Monitors Processes
Hi There, We are trying to monitor certain process from Linux server. We got the server through SSH and most of insteresting process are monitoring but We have some problem with process that have the same name, same path and different arguments, we can see let say similar process with the same name and path but different argument in process list. We can add to the template but if we try to modify the name, the program only let one and always the last one. is it a bug? Regards
Cisco serial number not shown
Hi is there a way to have OpManager v12.2 pull out the Cisco switch serial number?
Next Page