Install NFA 7 on Win 2008 with existing MYSQL
I have a few questions before installing: Platform is Win 2008 x64. I'm assuming the program is 32 bit but any issues running it in 32 bit mode on x64? Since my server has IIS built in, is there any way to have NFA use that instead of the apache it installs by default? Not a big deal, just like to have everything in one place. Any special procedures for version 7 to use an existing MySQL install or is it similar to the previous versions?
what can i do
how can i get the service packs of NFA with the version 5001 to 7001
Data Corelation
I can see kazaa on the application tab for an interface, but I cannot figure out how to corelate that to a source and destination address. Can this be done?
help
Boss Any one can help me currently i using 64 Kbps lines on my 4 1800 & 1 2800 series router but now i want to update the line with 2 Mbps from my lease line provider i get lease line & i get loop ok too but whener i connect the modem to rouet i get destination host unrechable any one suggest what tro do
21.664 pieChart*.png files lying around in /tmp
I have noticed really many pieChart*.png lying around in /tmp on the server hosting the NetFlow Analyzer. At the time there are 21.664 files, and it incremented every time a user visits the Network Snapshot page "/netflow/jspui/NetworkSnapShot.jsp" It seems like there is a bug that doesn't delete them when they are expired. I can easily clean them with a script, but it would be better if I shouldn't. Version : 7.0 Build Number : 7001 Best regards Gorm J. Siiger
How do I backup NFA 7?
I have purchased NFA7 and am using it currently. I am wondering how I backup the system? I ran the 'BackupDB.bat' under the 'C:\AdventNet\ME\NetFlow\troubleshooting' folder, but that produces a very HUGE backup. I just want the configuration information, not the actual data. If my server dies, loss of the old data is acceptable, I just don't want to have to reconfigure all of those routers and users and Google map points and so on... How do I just backup the configuration information? :?:
Voip and video traffic
Hello, I would like to know wether it is possible to determine the bandwith usage of Voice Over IP and streaming Video traffic with NetFlow analyzer? I read you can add your own applications but i never read anything about the support of Voice Over IP and streaming Video traffic.... Is it possible? I hope someone can answer my question! Thanks a lot!!
Reports will not email
I have created a report, added a valid email, performed the test email successfully, but when the scheduled report runs I get the following in email. Dear User, This is an automated mail generated by Netflow Analyzer Report Generation Engine. Problem while sending the report.[ Problem could be of large File size Report details:Report Type :Consolidated Report Report Generation Time: Mon Jul 28 06:15:29 CDT 2008 ***************************************************************************************
How to read data?
Hello, I have download Netflow Analyzer. Now I have made config changes on two routers - Site A Router A (two interfaces - FE0/0 & S0/0) and Site B Router B (two interfaces - FE0/0 & S0/0). Both these routers are Cisco 1760. Connected by Point-Point FULL T1. I have setup ip flow-export source FastEthernet0/0. Now, how do I get Bandwidth usuage from the data collected? Thanks for the help. Regards, Krishna
License install linux
Hi, My evaluation period is up. I have a new 1000 int license. The web browser returns the error in the attached file. Is this a result of the eval expiration? Can you advise how i can install my license from the command line. Regards Richard
Any chance of per-device licensing instead of per-interface?
Hi, Is there any chance of per-device licensing instead of per-interface? Our devices have a multitude of subinterfaces and virtual tunnel interfaces - to cover them all would cost a lot more than getting a totally-unlimited Scrutinizer licence.... thanks, alec
Netflow Analyzer - What ports does it use?
Hi, I have put the Netflow commands onto my Cisco 2600 router. This router is our Internet router and is in front of our Cisco firewall. The Netflow destination is a server in my LAN, so I was wondering what ports I need to open from this Internet router to my internal Netflow server? All I have opened is UDP 9996 from the router to the server on the LAN and nothing else. Do I need to open UDP 9996 from the Netflow server to the router? Many Thanks
No data available
Hi, I am suddenly finding a 0% Traffic IN and Traffic OUT for all interfaces. This is persistent since the last 24-30 hours. Can you please suggest what could be going wrong? Thanks. Sourav
weird bug, password wont work!!
Hi, I need to reset my password for NetFlow Analyzer Analyzer, Trial vers. admin/MyPassword didnt work as i changed it, and then fell back to admin/admin which still didnt work. its currently installed on a windows server 2003 and this is the 2nd time this happens to me, as i have to uninstall it, clean my registry and install it back in! any help would be appreciated.. thanks and best regards, Roland
Custom Reports
Is there a way to get a report of the min max utilization of all the routers I'm monitoring
Frequency of export from netflow exporter
(1) In the enterprise edition, the netflow collector exports the netflow data to the analyzer in 10 minutes interval. Is there a newer version in future that will export the netflow data in 1 min interval? (2) what is the latest version for Enterprise edition? CY
AS View bug?
When sorting the AS view by inbound or outbound traffic, it seems to disregard the traffic units (ie mbps/kbps) and sort the list solely on the numeric value. Is this a bug or something I'm missing Thanks Andy
How to configure netflow in cisco 4500 serice
Hi , I am trying to configure Netflow in my core switch,but i am not getting the command,to configure Neflow as specified in your help guide. My IOS version is as flows Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M), Version 12.2(25)EWA10, RELEASE SOFTWARE (fc1) Does cisco 4500 Series don't support Netflow.. Please help. Regards, Manish
map database to different location / migrate database
Hi, Today i've got a message on Netflow, the server disk space is only 1GB. I believe Netflow is saving the databace as default on disk c:. I would like to change this setting to a second disk on the server. We added a disk D: with lots of room. Please, let me know how to tell netflow to start saving information on our new disk. Thank you, Zeek
Problems with TrafficUtil-View
Hallo NFA-Team, i have problems with the view for traffic-utilization. This problem is exist in both versions of NFA and for all interfaces. Both versions are running on the same machine (for enterpriseV. the collector also). In attachment you can see this phenomenon and see that NFA get information for IN and OUT traffic. Thanks and best regards Helko
RADISU Auth
I'm trying to configure RADIUS auth in NFA 7. When I choose something other than PAP and click submit, it automatically goes back to PAP. I also never authenticate (according to my RADIUS logs I never even get an attempt). Anyone get this working?
Channel load displays incorrect
Hello, i found one small bug. If i open Interface View page i can see loading on each interface. But if you open attached file you can see strange thing, some interface load only on 60% but in looks like 100%. Why it is happen and how it solve?
Is this router supported bandwidth.com router model 1001
i was wondering if this router is supported by the netflow analyzer software.
Upgrade - without a gui on the Linux server?
Hello we are running v5 of the software on Linux. I am following the instructions here but the upgrade script seems to need a gui which we don't have installed- is there a way to upgrade just with console access? thank you Anthony
Moving DB from 6001 to new server running 7001
My current DB is about 100Gig, I've got a new server I want to migrate to. The old server s running 6001 the new one is running 7001.
something confusing about
hi As the userguide says,in "less than 6 hours interval"report ,data of application is 10mins granularity.So i think it is a little confusing. the data form the online demo. from 2008-07-14 17:54 to 2008-07-14 17:55 Application Traffic Percentageoftotaltraffic GGP_App 262.41KB 40% from 2008-07-14 17:54 to 2008-07-14 17:56 Application Traffic Percentageoftotaltraffic GGP_App 459.42KB 29% Beacuse 17:54-17:55 and 17:54-17:56 are in the same "10 minuters interval" ,i think the Traffic data should be
NBAR and Netflow 7
After upgrading to Netflow 7 I lost the NBAR data the NBAR Tab is present but netflow is not collecting any nbar data. Thanks Ramzi
MS-SQL Support
Hi, It will be g8 if NFA had a MS-SQL Support.
Billing module available
Hi, The early access of the billing feature is now available over NetFlow Analyzer 7 Professional Beta. Please send us a mail with your contact details to support@netflowanalyzer.com in case you are interested in the billing feature and we will send you the link to download the same. Thanks Raghu Ramanujam Product Manager ManageEngine NetFlow Analyzer Phone: 925-965-6481 http://www.netflowanalyzer.com
Discrepancy in WebInterface 7 version
Discrepancy in the WebInterface in 7 version "License anagement"
busy web client
guys... is anyone experienced loading for a long period in NFA web client (GUI)?? It keep loading before you can continue to other pages i have to reset NFA server to make the web client normal again. any troubleshooting suggest?? thanx before
"Unaccounted" traffic in Netflow 6.0
Hi all, I use Netflow analyze 6.0 and i found "unaccounted" traffic , How can i know this traffic generate from [Application, port, source and destination] I already change "Product Setting-->Record Count to 100" but it still exist and if i see in troubleshoot it will not show unaccounted support(It will show only know traffic) Please see in attachs picture Thank you Mussusaka
Netflow URLs
When I display an IP group then the URL is as follows: http://servername.domainname/netflow/jspui/traffic.jsp?ipgroup=true&iI=2701 This actually gets me an IP group with a specific name. Is there any way of using the name of the IP group in the URL. That way I can link to it from my other web pages without having to know this strange number (2701 in this case).
Combine Traffic flows : Nortel SMLT senario
Hi, Is it at all possible to combine the flows received from a SMLT setup into the one flow chart, i know you can do a report and combine the ports but for the default view we would like to have the SMLT ports seen as one port. Is this possible? Cheers
Netflow Pro - 64-bit support?
We're currently running Netflow Pro 6001 on a Win 2003 32-bit server w/ 4GB RAM. Our flows are high enough that when reporting, we're waiting a long time for results. We've tuned MySQL and such to take advantage of as much memory as possible. That said, we'd like to upgrade the system to Windows 2003 64-bit so that we can take advantage of more memory, but it looks like the current netflow pieces (MySQL for example) are compiled as 32-bit. Is there a version of Netflow (specially the MySQL database)
Traffic Quota
Dear all, i have a Q. i want to know how much traffic in or out by specific interface by month . I mean lets say i want to know how much traffic did some devices in my network had make it out throught my network in one month. How can we do this , is there a program in your Co. can do this. Thanks
Why no upgrade pack to 6.1 yet?
6.1 has been out for a long time now. Why is there no upgrade pack for existing users yet? Will there be no upgrade path to v7 when that comes out either?
NFA Professional Edition 7 Beta released !!!
Hi, We are glad to announce the release of NetFlow Analyzer Professional Edition 7 Beta (build number 7000) along with the following features. NFA 7 Beta is only available as a fresh installation and the service pack will be available along with the release of NFA 7 General Availability. Billing feature is not available in this release and will be available in the NFA 7 General Availability. You can download NFA 7 Beta from http://manageengine.adventnet.com/products/netflow/download.html Thanks Raghu
Speed Value Problem
Hi, I'm evaluating Netflow Analyzer 7 Professional for a small ISP. Our primary goal is to measure our clients netblocks downstream traffic in order to better load balance our Internet links. The problem is that we see a big difference between the real traffic in the devices we're monitoring and what Netflow Analyzer reports. As you can see in the attached graphics, we got about 1Gbps of downstream traffic, but Netflow Analyzer reports only about 190Kbps. We're using Cisco 7609-S Routers (IOS 12.2(33)SRB2)
Error when clicking on License Management
I get the following error when I click only on the license management tab. Status 500 - -------------------------------------------------------------------------------- See attached print screen
Next Page