Netflow Analyzer integration API
Just wondering if Netflow Analyzer provides any interface to integrate it with third party web portals etc. Actually we would be interested if we can call Netflow Analyzer reports directly from our customer care portal (modules are written in PHP/PERL) mostly.
Netflow Analyzer on a Pix 515e
Greetings, I don't have a Router but a Pix 515e box. How can I use it this way? Thanks, Said
Linux Router Configuration
We're trying out AdventNet Netflow Analyzer to determine if it will work with our situation. I have gotten it working on all of our Cisco Routers; however, i cannot find any instructions on getting this working on a linux box. Specifically I'm referring to a checkpoint firewall linux setup. I want to be able to monitor traffic that goes through this firewall. Appreciate any help, thanks! -Sean
Traffic In/OUT Ratio & IP's
In Old 6 Version I was able to see the My Internal IP in ethernet out Tab. But In New i can see the My Internet Ip & External IP's instead of My Internal IP's My Fast Ethernet show the My Live Ip & External Ip's not My Internal Network IP. & My Internal Traffic Doesn't match the Serial Interface's Out bound traffic. Thanx & regards
Professional > Enterprise migration
Hello, We currently run multiple netflow analyzer installations for our managed customers - these are usually around 10 interface licenses, We also have a central installation that we intergrate with MSP as a shared customer platform, We would like to have the enterprise edition so all our managed customers can view the netflow intergation but the nature of MSP is that most of these customers are on separate networks and therefore netflow can't be sent to the central installation Enterprise is the
Want to see who is congesting my bandwidth
I have my 1mbps connection speed crippled suddnely. I want to see whose pc on the netwokr is generating a lot of traffic [b/c virus or something] and disable the pc switch port/quarantine it. under normal time, the bandwidth is quite enough. witht the LAN isolated I get the right speed on my laptop. I have 2801 router and 3750 switches, one of the switches port is the gatway to the LAN users. I want to monitor Internet traffic only. how can netflow help me with this. Looked at the demo and am at
No OUT traffic on HP Procurve 5400
Hi, I'm collecting sflow from a HP procurve 5412. Unfortunally there's no OUT traffic on some interfaces. As stated in many posts on this forum, i've enabled sflow on all of the procurve interfaces. Is there a solution for this behavior? Thanks in advance!
Cisco IOS router with ADSL: NetFlow collection
Hi, I am trying to collect Net Flow statistic from Cisco 1841 router. The router is connected to the internet using Cisco ADSL HWIC. The connection is made using Dialer interface. Net Flow Analyzer detects all interfaces of the router correctly. My problem is: for "Dialer" interface only OUT traffic is shown for "Virtual-Access" interface only IN traffic is shown all other interfaces are shown as expected. Each interface has NetFlow enabled: show ip flow interface FastEthernet0/0 ip route-cache flow
Alert profile threshold configurations
I wanted to configure the alert profiles to generate high utilization alerts if the utilization is above 90 % , 5 times in 60 minutes duration. I have configured the thresholds as the same 90 , 5, 60, in the alert profile configuration. However, I am noticing an alert even if the utilization is above 90% even for 5 minutes. Please advice whether the configured thresholds are correct.
Edit Mail Report Template
I need to edit mail report template but i can't find path file configure. I know that it is in C:\AdventNet\ME\NetFlow but don't know that it really is.
Netflow 7 - Radius Authentication Issue - IAS Windows 2003
I have setup Windows 2003 IAS to except Radius from my Netflow host, but I have an issue with authentication. 1. I have setup Radius on Netflow to support MSCHAPv2 2. I created and account with operrator privileges and enabled radius authentication. Also selected a device group to view. 3. When entering the user details I get an error Invalid Username / Password. 4. I check checked the System Event View on IAS and can see that I have been granted access. 5. Also debugged the ip packets and can also
About Netflow Analyzer DataBase schema
Dear Sir, Could you tell me the NFA v7 database schema or realtion ? Because,I would like to statistics within one month of the flow of the number of IP.
AS View Query
Hi, I have a customer whose traffic flow comes almost exclusively from one address and runs for about 14 hours out of 24 - it's a backup process. If i look at an hourly traffic report for the customer, the figure pretty much matches the last hour report for the AS where the traffic is sourced from just as expected - averages out at 8 meg or more. If i look at the 24 hour traffic report for the customer, it shows an average of 5.5meg which is correct. However, the last day report for the AS seems
What's the meaning of 148.144/28.140.55.200.in-addr.arpa?
What's the meaning of 148.144/28.140.55.200.in-addr.arpa in this report? thanks in advance regards, Israel
Aplication Data Unacounted
Hi, i have a problem with my netflow analizer some interface when i click for aplication report this say that all disponible data is unacounted. My netflow analizer version is: Versi�n : 7.0 N�mero de versi�n : 7002
Bandwidth statement of serial interface
On a serial interface, should I be setting my speed to the port speed or the pvc? If I have a 1.5Meg Port speed with 768kbps epvc, on my bandwidth statement on that serial interface which bandwidth should be reporting so Netflow shows it accurately? Thank you.
Differing bandwidth
Hi, I'm on V7002 and I can set differing input and output bandwidths on the interface of a router. However, when I set up an IP group that represents a subset of that link then I cannot do that. I am forced to choose the same for inbound and outbound. Can this feature be added?
Multiple link down alerts?
Is it possible to create multiple link down alerts? I don't see a way to do it... We currently have a router with two Internet connections and I'd like to get alerts for each connection.
Reports
Is there a way to get a report of everyone? I can look at them and have to click on each person. I would like to see all the information for all the destinations. In page 1 of print screen is the complete list. Page is 2 is the first destination. I would like to show all the destinations in a report format. Is that possible? Thanks Eric
Feature Request
Make the Network snapshot per device group. I would like to see a network snapshot per device group rather than a global view regardless of what group you are currently looking at. If this is possible. Thanks!
Top X Traffic Destinations by Domain
Is there a way to list the top 10/20..etc Traffic destinations by domains for a specified time period in a report? Example: Domain---------------Interface-----------------------------Bytes Transferred youtube.com---------Internet Gateway-------------------39 MB aol.com---------------Internet Gateway-------------------28 MB msn.com--------------Switch VLAN 11---------------------11MB Thanks, Vic
Very simple In/Out Traffic Graph question
Hi all, When I look at a graph for a Cisco device, say Serial0/1/0 and I see chart with the inbound and outbound traffic together; Are these combined numbers or separate? In other words I have a T3 with Port/CIR set at 45/25. Of that 25Mbps I have outbound traffic using up 22Mbps On that same interface I have inbound traffic using up 7Mbps Is it bursting above my 25 CIR at this point? (25+7?) What do the numbers mean when combined on a graph? plus or minus or shared? thanks in advance. hope that
Collector IP address
How do I change the IP address of the collector on the central server, because I've moved the client from one machine to an other and when I try to go into the collector it redirects me to the address 169.254.97.40 thank you in advance
Deleting Disabled Collectors
How do I remove the disabled collectors in version 6.0.0
Sudden change back to free edition
Hi support, My netflow analyzer sudden changed back to free edition and i cannot apply the license, how could i solve this problem? Raymond
IPENCAP_App
I am seeing IPENCAP_App in the top ApplicationsIN & inside that the port number is given as *. This is there for my WAN Interface. can sumone tell me what is this IPENCAP_App?
Wrong Info (Volume,Speed,Utilization,Packets)
Hi, i'm evaluating NFA 7 Professional Plus and i like so much. But I have a problem. I have one router with 2 Gigabit interfaces and a ATM interface (with sub-interface), and all the graphs showing in the program don't correspond to actual scenario. The graphs shows that my ATM interface of 28Mpbs, have only 3Mpbs of OUT Traffic (while my MRTG shows 25Mbps). The same for the Gigabit interfaces. I have configured my router so many times, but nothing helped. Can somebody help me please? Thx!
[ask] ip groups template
Hi everybody.. Can i create ip groups at once for many ip network ? i know that we can use 'Bulk load IP Groups' ..but it's using script...imagine if you have create more than 100 ip groups... hahaha... It's very useful if we can import that IP Groups using template like MS.Excel thank's
Netflow server not capturing flows:
Hi , We enable flow on 2811 cisco router in our test bed like other routers , These flows are not seen and not captured under Inteface Tab. There is no problem with the configuration bcause i can see other links on the netflow with the same configuration. Below lines are verified: ip cef -- is enabled flow version 5 --- flow exported to destination 192.168.10.10 9996 flow ingress - enabled ip route-cache flow -- is enabled under interface. snmp also set. TestbedLink1#sh ip flow export Flow export
Migrating to new server
We need to migrate our Netflow installation to a new server. What is the process for doing this? Thanks,
Application Mapping INOP
When I look at the IOS interfaces facing our ISP peers, I look at the "Conversation" tab in the "in" direction. I notice that most of my top ten conversations in the past hour are with both LimeLight Networks and Akamai and are roughly 1 GB. I want to classify (Application Mapping) conversations to/from LLN and Akamai as a custom application so that management can see just what type of application consuming most of our internet bandwidth without having to try to understand what an IP range is (you
Netflow Pro Plus eval and Cisco 7600: wrong bandwith data
Cisco 7606 with IOS Version 12.2(18)SXF10, RELEASE SOFTWARE (fc1) flow config mls ip multicast flow-stat-timer 9 no mls flow ip no mls flow ipv6 ip flow-export version 5 origin-as ip flow-export destination x.x.x.x 9996 ip flow-export destination x.x.x.x 12000 and ip flow ingress on some interfaces tried both version 5 and 9 flow i have wrong numbers in bandwith results, it says my interfaces are loaded in Kbits and bits, while actually they process Gbits of data any idea what's wrong?
Google Map problem
Hello - I am trying to assign locations for my routers in google maps. I click on assign, enter the address and click save location but I get the following error: "please select the location on the map" What am I doing wrong? Thanks,
Initial menu screen on logon
Hi, I'm testing Netflow V7. When I logon I get the initial 'network snapshot' screen and then my users always immediately click on 'All Devices'. Is there a way to make this second screen my initial screen on all future logons (or perhaps set my initial screen to any other screen - say 'All Groups)?
c6509 - Flows in one direction only
Hello, Can any one advise on where i might be going wrong with the issue below? I have customers on a 6509 on a 48 port ethernet card - WS-X6248-RJ-45 Traffic goes from customer to internet and back again through an svi on a CEF720 4 port 10-Gigabit Ethernet card. I have flows for outbound traffic - customer to internet - but no inbound traffic, internet to customer - i see no flows in the flow cache or on the software despite obvious inbound and outbound traffic patterns observed on cacti - customers
Can NetFlow Analyzer report on layer2-switched flows?
Hi, I've a Cisco 6500 that supports netflow of layer2 traffic. I've followed Cisco's steps for enabling this, but I only see flows associated with layer3 interfaces in the analyzer. Is what I'm trying to do even possible with this tool? Thanks, Andy From cisco.com: Switch(config)#interface Vlan10 Switch(config-if)#ip address 10.10.10.1 255.255.255.0 Switch(config-if)#exit Switch(config)#interface Vlan20 Switch(config-if)#ip address 10.10.20.1 255.255.255.0 Switch(config-if)#exit Switch(config)#interface
No "Out" traffic being shown
Hi, I'm evaluating this product, have not browsed through the forums. ..so sorry if this is a repost I'm running a Cat 6k5 with Sup720 (ipservicesk9_wan-mz.122-18.SXF6) two SP's with full BGP table ip route-cache flow on the interfaces (IP) facing the SP's ip flow-export source Vlan10 ip flow-export version 5 ip flow-export destination x.x.x. 9996 config, tried few variations.. but no "OUT" traffic.. what am I doing wrong ? any ideas ?
Interface group and IP group
Hello, I have tried create user with one ip group and one interface group but I have failed. Because when i add these groups and push button ADD i am turn back to the user list screen and my new user was absent in the list. How i can add both Interface group and IP group to a one user?
Changing User settings for timezone
Hello everybody, i got following problem: I gather Netflow-5 data from a Packetshaper (Packeteer) As I'm situated in germany i like to view the date i gathered in GMT -1. The web application displays everything in PST. I read about the capability of Netflow Analyzer 6.5 "Enterprise" to set user specific timezones. Is it possible to do this with Version 7.0 Build 7002 "Free Edition" also. (I'm within the 30 days trial at the moment)?
IP Groups - Include and Exclude
I am having trouble setting up a couple of IP groups to monitor Internal and External data. I am obviously misunderstanding something. I have set up an IP group called Internal which includes certain address ranges (our internal ones). I have then set up another IP group called External with those same ranges but excluded this time. The Internal group works fine and excludes any traffic destined for outside our company. However, the External group records nothing. Where am I going wrong and what
Next Page