Billing Report Setup
Hi Guys I am new in the netflow so I have a question about the billing report! I have 2 private links used by different departments. Financial department want's to know how many % each department uses for each link. well, all departments are different networks, so this part is "ok" My doubts are: 1) the link is a 4M full duplex, so how to setup the based volume? the price is fixed. 2) I cannot insert the same IP Groups for 2 different reports? thank you
Support of netstream
Greetings excuse my english I Download netflow at see on the site that supports huawei devices, but when I set up my device and send the flow to NetFlow collector, that was my disappointment to see that it tells me not to recognize the type of flow, I wonder if it really supports or not this type of devices
No % of nework utilization
Hi, I installed Netflow Analizer and everything works fine except the following. In the % of the netowrk utilization it stays 0% even if I'm making a huge download... Is this the right behaviour?
Search function
Can we get a search box, so I can just type in a certain netbios name or IP address, and it will show me the stats of that one device?
Netflow Analizer does not display any data for a specific Device
Hi, my name is David and I am the administrator of a Network Analyzer 6 Professional Edition with Unlimited licenses. Currently I have a trouble with a Cisco 2811 router which has the next configuration on it: RT2811_CACBOGALAMOS1#sh running-config | inc flow ip flow-cache timeout active 1 ip flow-export source Loopback0 ip flow-export version 5 ip flow-export destination 172.22.227.3 9996 This device is sending flows to 172.22.227.3 using v5 Netflow. The router
netflow linux xhost problem
I have installed netflow analyzer 4010 in redhat linux and write a script in /etc/init.d and want to start the product automatically. But I found that I can display and show DISPLAY error. and I also add the two line in my script: export DISPLAY=localhost:0.0 xhost + But it has any result.I can only start the software in my linux console. Please tell me how to solve it and start the software include xhost enable. Frank
Netflow sceduled backup issues.
Hi I am struggling to create a unattended scheduled backup up. I am planning to do the following in a batch file running as a scheduled task. a) Run shutdown.bat b) Robocopy the entire adventnet directory to a different location c) run run.bat Shutdown.bat stops with a pause, i can see from the batch file that it supports arguments and that %2 is for the pause. But i can not find the correct arguments for %1 and %2 so that it will run silently. Run.bat Starts Netflow and stops while active, thus
Qos
Hi, I have neflow analyzer which is working perfectly, however im not sure with Qos reporting cause all my traffic just sits in default. not sure if this is normal..
Hi, How do I setup Qos on netflow? I have Nbar and CbQos working Qos only say default with all the traffic inside..
One report of all traffic for one IP
I can see how much traffic is generated by one IP source/destination across all interfaces if I do: Interface View->More Reports->Search. I search for the same source and destination, both in and out traffic. It shows a list of all of the sources and destinations talking to this one IP and the traffic for each for the given time frame. However, I would like to get the total for this traffic without having to report on all of it and add it all up manually. I know netflow has the info, I just
How to start services of Netflow Analyzer Enterprise 64bit on Linux
I have problem with starting services in Netflow Analyzer Enterprise. The Thing is that I installed ManageEngine_NetFlowAnalyzer_CentralServer_5410_linux64.bin and ManageEngine_NetFlowAnalyzer_Collector_5410_linux64.bin on VM that runs 64bit CentOS for some test purposes. I haven't modified any of the .conf files in the installation. When I tried to start services I got the following int the wrapper-log file: STATUS | wrapper | 2009/10/19 13:49:12 | --> Wrapper Started as Daemon STATUS | wrapper
Alert ptofile based on packet count
It is not possible to create alert based on packet count, so can I read the database directly to capture packet couter?
Netflow 7.0 FREE EDITION / Utilization - percentage Traffic Graph tab not working.
Hi we have a Netflow 7.0 FREE EDITION . For every ip group the Utilization Tab shows an empty graph. Can anybody tell mell how to fix thsi ?
QOS
I am getting inconsistent QoS report on Netflow. The machine is sending packet with AF32 and Netflow is reporting EF. Why is the discrepancies? Please advise. Thank you,
Apparent loss of historical traffic record
Hello, We're running NetFlow Analyzer 7.0 (build 7000) on RHEL 4.0 and recently noticed that the historical information has either disappeared or is no longer being displayed. Traffic graphs and data points display for no longer than 15 minutes at best (often 10 minutes). Disk space is NOT an issue. We're configured to maintain 3 days of raw dataand we've only used 67 of our licensed 100 interfaces. Restarting the services on the server has not helped. If someone could please point me toward
ManageEngine NetFlow Analyzer Enterprise Edition 7.0 Released
Dear All We are glad to announce the release of NetFlow Analyzer Enterprise Edition version 7.0. We take this opportunity to thank all our customers and users for their feedback and the continued support. Following features are the highlights of this release: Reporting on CBQoS - Useful for monitoring class based pre and post policy traffic usage, class based drops and queuing. Customizable dashboards for users with Operator & Guest privilege. IP group Include / Exclude - Ability to create IP groups
NFA Enterprise Edition - Performance Tuning Tips
Hi All, We can increase the performance of NetFlow Analyzer Enterprise Edition by making some minor changes. The performance can be increased by tunning both the JAVA and MYSQL. Since the Enterprise Edition is on a distributed architecture, we have to tune both the central server and the collector. Tuning Steps for the Central Server : Java Tuning Steps: The Java tunning has 2 steps 1) Tunning the run.bat/.sh 2) Tunning wrapper.conf 1) Tunning the run.bat/.sh Open run.bat/sh" file present
Netflow Utilization >100% with WAN Compression
Is there a way to fix the % Utilization so it represents the actual utilization of the Interface? This is a 3Mbps WAN link that routinely passes more than 3Mbps becuase the router has the built in Cisco WAAS (compression). It looks like this is a calculated utilization based upon what can into the router (uncompressed). So our Utilization is routinely 150+%. This is from NetFlow Analyzer version 7.5
Reports time is 6 hours behind the real time
Hello, The reports are all 6 hours behind the real time for exemple the last hour report generated at 14:00 will be between 06:00 to 07:00 I think that the netflow is getting the time from the host on which is installed any idea on how can I get the right time Netflow version 6 Regards
HTTP Status 404 - /netflow/jspui/NetworkSnapShot.jsp
Hi after updating our netflow from 7002 to 7600 i recieve HTTP Status 404 - /netflow/jspui/NetworkSnapShot.jsp upon opening a browser. Any idea how to fix this? Regards, Marc
Invalid Username / Password
Hi. I have installed new version NetFlow ANALYZER 7.5 but I can't enter in it (Invalid Username / Password) I entered: login = admin and password = admin but it's not correct :( How I can solve this problem? Thanks.
NFA 7.5 SP4 poor performance when running database search
Hey, I have a performance question/problem with NFA. In general system runs fine, but search -report is unusably slow. If I run query "search" from main window "more reports" tab, with search criteria "port 80" without any source/destination, it takes 5+ minutes. Any ideas ? Thanx in advance ! -j ====================== System specs: * NFA 7.5 SP 4 running on red hat linux with 8GB RAM, quad core 3.4 GHz CPU, lots of disk, dedicated for NFA only. * 4 netflow devices (totals of 134 interfaces) and
IP Phone Traffic
Hello all, How do we monitor te IP phone traffic? Thanks in Advance....
Netflow and Opmanager Widgets
Is there a chance we can get Opmanager(mem util, exchange) and Netflow widgets? I hate keeping a webpage open and would rather have widgets running on the side of my desktop. Thanks,
How to installtion NetFlow Analyzer in Linux
Hello guys. Now i configure NetFlow Analyzer on ubuntu-9.04. How to installtion step to step configuration. Please give me configuration file
Custom Backup Database
Hi Guys, This time NFA can only backup all DB. Maybe on next version we can customize backup, for example we can only backup "Application Mapping" so we can do fresh installation and load Application Mapping that we used on the last version or last installation.. Thank you
Billing Plans - Edit Desrciptions
Hi, we miss the opportunity to edit the description of a billing plan once it is created. We definitly need the possibility to edit the descripton. Do you have an idea when this will be implemented in Netflow Analyzer ? Or maybe you can send us a fix or patch for enabling this ? Regards Florian
failed upgrade
hi, I was going to upgrade from 7002 to 7500 and did so by installing the binary instead of applying the service-pack. as a result I've got a corrupted system and I'm not able to restore anything and the version number is unknown. I've tried to reinstall the 7002 version and also removing/reinstalling the servicepacks I also am not able to restore from the backup. is there anything I can do or do I need to start from scratch?
adjacency issues
1 export packets were dropped due to adjacency issues how can I troubleshoot this in my router?
ASA 8.2 NSEL
I recently updated to ASA code version 8.2. Adventnet NetFlow Analyzer only reported some IP address, but did not give any data bandwidths or in/out traffic.
Netflow Analyzer seems to double count my ESP/GRE traffic
Any thoughts? I get double the true traffic when Netflow analyzer counts the IPSEC/GRE packets. It breaks them down into 2 seperate categories yet counts the same packets twice(one for each protocol) essentially doubling the amount of traffic across the interface. it shows as: ESP_APP----- 45% GRE_APP-----43% and the packet source and Destination are exactly the same; and the same percentage breakdown inside the protocol readouts. ?????? help
Upgrade from version 5.5 > 7.6
Can anyone advise how to upgrade netflow analyser from version 5.5 to version 7.6 ? any help would be greatly appreciated.
force interface descriptions
Hi Support, Can you force interface descriptions to be listed Netflow rather than the ifindex name? Thanks, Sean
Netflow Billing not updating
I have NetFlow Analyzer 7 Professional Plus. When I updated billing plan with new base costs, the new reports do not reflect changes of base costs. On the Bill Plans List screen, the updated costs are shown correctly. However, the reports ran after the update still show old costs. Any idea why? Thanks. Diane
NFA 7.5 Database Schema
I have been tasked with extracting the usage information for presentation to users in a web browser. Had a look at the database schema (MySQL Workbench) and decided that I need much guidance to workout what bits of data to grab from what tables. Are there any documents on getting summary data in a usable form (NOT pdf) so we can update usage every 15 mins on a web page without giving the users access to NetFlow ?
Juniper with Netflow problem
hi all I have a M10i and configured. In the Netflowanalyzer I see the Juniper M10i, but the informations is not correct, because de traffic is very high and the informations that arrives of Juniper is low. my jflow configuration is. not: adding source address or not same.rate 1 or 100 same :) sampling { input { family inet { rate 1; run-length 9; } } output { cflowd 10.0.1.1 { port 9996; version 5; no-local-dump; autonomous-system-type origin; } } }
what hostname shud i put to start this software?
in the manual, it require us to type http://<hostname>:8090, i wonder wat hostname it mean?
Great Product! Works well with Juniper Routers
Just wanted to say "thanks!". I have sucessfully used this utility to track flows in 7 simultaneous Juniper M-series routers. Here's my JUNOS 7.3 configuration (as I noticed you don't mention any Juniper-specific information on the website). First thing to do, is to enable packet sampling and set your output/target for the flows to be sent: forwarding-options { sampling { input { family inet { rate 100; run-length 9; max-packets-per-second 7000; } } output { cflowd 172.28.1.14 { port 9996; source-address
netflow analyzer installation in debian
can netflow analyzer be installed in debian. when i start the netflow service in debian run.sh ================================================================================ JBoss Bootstrap Environment JBOSS_HOME: /root/AdventNet/ME/NetFlow JAVA: ../jre/bin/java JAVA_OPTS: -server -Xms128m -Xmx256m -Dprogram.name=run.sh -Djboss.server.type=com.adventnet.j2ee.deployment.system.AdventNetServerImpl -Djboss.deploy.localcopy=true -Djboss.boot.library.list=log4j-boot.jar,jboss-common.jar,jboss-system.jar,AdventNetDeploymentSystem.jar,commons-logging.jar
IP Groups have double the site-to-site traffic
For our MPLS network, I have created a few IP groups to help identify traffic flows going from our head end MPLS router to specific sites. The traffic displayed at a devices view (say the router) shows correct, however the IP groups seem to show double the traffic (exactly). I have verified that ip ingress is configured correctly on the end devices (as stated above, my devices show the right bandwidth). So basically, if I create an IP Group from Site A to Site B, it may show that a 1000kbps peak,
Next Page