Storage Setting -> Redirect last 2hr to Aggregated
What do this option?
Routing protocol reporting
Does Netflow analyzer professional 7.x support reporting for traffic on routing protocols such as ospf and eigrp? We do not see these protocols reported for interfaces running ospf. Is this data not exported in the netflow v5/v9 reports? We have tried using both v5 and v9. I assume that you can differentiate the traffic in v5 flows by the destination address of 224.0.0.5 or 224.0.0.6 (for ospf), however I do not see any netflow traffic reports destined to these multicast addresses either. Thanks
Multiple Interfaces on Interface View
I configured netflow on one port of a router and when i open up NetFlow Analyzer and looked at the rotuer it shows three interfaces that it is monitoring. All interfaces have inbound and outbound traffic. Why is three interfaces showing up when i only configured one on the router?
custom automated reports
does anyone have a recommendation for third part professional services to assist in writing/creating custom reports with netflow? Thanks
Netflow Analyzer 6.1 Build 6100 PDF reports graphs not looking correct
Anyone have this issue? Been using this feature for over 2 years and recently my PDF reports of interface activity (the graphs specifically) are looking goofy By that I mean, the colors that display in and out traffic are all messes up in the graph. When looking at the graph in the application, it looks fine, its just the PDF version is messed up. Any help would be appreciated. Thanks!
Support of QoS in NetFlow Analyzer EE 6.5
Hi All, Just wanted to know if QoS is supported in NetFlow Analyzer EE 6.5 (Build 6501); we have enabled the NetFlow configurations on Cisco 2821 router (Internet Router), the data is received but we see nothing in the QoS tab. Should we perform any addition tasks for viewing the QoS. Appreciate your response. Best Regards, Kris
difference in reported traffic
im using the trial on several vlan interfaces and notice a difference in the full list of applications and then the list of involved ip addresses in a certain application. i read something on granularity but that seems unable to explain a difference between 1.6 gig and 500mb in one day. so when i check a certain application in the full list i notice in the traffic column it says 1.6gig and when i select that application i only end up with 500mb in the traffic column. any clue what is going on here?
Netflow - differences in reports
Hello, We are running a trial version of Netflow Analyzer 7 professional. There seems to be a difference in the outputs from some of the reports. If click on 'conversations' link i get a big list of all the source and destinations for the specified time period. There are some pie graps at the bottom. If i open up the 'top source' pie graph it shows me that, for example 37% of traffic came from source IP address 10.4.5.98. However if i click on the 'sources' link that page shows me that source
Netflow Analyzer - java.net.SocketException: Network is unreachable
Hi, I've been using Netflow Analyzer for a few months without any issues. Suddenly, netflow analyzer refuses to startup. Follows "console output on DEBUG level": /etc/init.d/netflowanalyzer console Running ManageEngine NetFlow Analyzer 7... wrapper | --> Wrapper Started as Console wrapper | Using system timer. wrapperp | server listening on port 32000. wrapper | Classpath element, wrapper.java.classpath.7, does not exist: ../lib/jboss-boot.jar wrapper | Classpath element, wrapper.java.classpath.11,
Last hour is behind by 1 hour?
Hi Guys, Just downloaded the linux version of this program. I have a problem which has kind of stumped me.. Why is the program reporting the last hour wrongly, for example: On the dashboard I have last hour of data apparently From : Dec-18-09 06:08 and Dec-18-09 07:08, when in actual fact the real time here in the morning is 8:08am not 7:08am, also status also states that last netflow was recieved at 7:08am and not 8:08am, graphs also reflect this 'off by 1 hour'. The 'correct' last hour would be
Incorrect key file
After an unexpected server reboot I see in the event viewer: Dec 17 11:20:24 mysql[error] 100 D:\AdventNet\ME\NetFlow\bin\\..\mysql\bin\mysqld-nt.exe: Incorrect key file for table '.\netflow\raw_302_20091217091155.MYI'; try to repair it For more information, see Help and Support Center at http://www.mysql.com. The messages are no longer being generated so I am thinking everything is OK now. I am able to pull up netflow info OK. Just wondering if I need to still repair anything. -Debbi
Netflow Analyzer Professional
I havea 20 pack perpetual Netflow Analyzer Professional license with one year maintenance. I want to purchase an additional 20 pack. Do I need to purchase additional maintenance? Why?
Netflow 7 - 3 interfaces - license limitation
I was using netflow v5 (free) with my 857 router which managed 2 interfaces: bvi1 and vlan 1. When we got a new ISP, I replaced the 857 with an Cisco 877 and upgraded to netflow V7. It now monitors BVI1; Dialer0 and Virtual Interface2. BVI1 logs both in and out traffic Dialer0 does only in Virtual Interface does only out Due to budget and license constraints I only want to monitor 2 interfaces, like I always have, BVI1 and Dialer0. I anticipate a problem when the “trial” expires for the
NetFlow Analyzer Professional / Plus supports MicroSoft SQL server!
Hi We are happy to announce that NetFlow Analyzer now supports MicroSoft SQL server database. You can download, if you want to install afresh, from here. OR If you are using a previous build (less than 7600), you can apply the service pack and upgrade. Once you are on the latest build, which is 7600, you can follow one of the following: Steps on: Configuring MicroSoft SQL - For a new start with no data or configurations Migrating to MicroSoft SQL - For existing users who want their configurations
License issue for Professional Plus.
We had NetFlow Analyzer Professional without date restrictions. Last year we purchased upgrade to Professional plus and we received license which is now expired. When we were buying upgrade, nobody mentioned that Plus licence is time based - we probably would not go for the upgrade in that case. How we can get Plus functionality back?
Billing per IP address
Hello I need to generate alerts when data transfer (download+upload) to one clinet IP address (for example 172.30.4.2) reaches 90% of maximum data transfer 2000MB. There is 100 clients like this, so I need to be notified by mail when everyone from clients reaches limit 90% fo 2000MB. Do I need only one billing plan with associated IP groups (one IP per IP group)? Or do I need 100 billing plans? Thanks for answer Mato
Problems Displaying a SubInterface in NFA
I'm not sure if anyone else has seen this issue but one of several 2821 routers I have doing NF exports, doesn't display one and only one, of the subinterfaces via NFA. The sub is up and up and I don't have this issue on any other 2821s but this particular router is picking up 4 interfaces not 5. It is not an issue of the sub being unmanaged, it simply doesn't display and i have no idea why. I'm running IOS 12.4(23) on this router. Thanks, Ron
Hello. I've got a problem with Utilization frame in NetFlow Analyzer.
Netflow Analyzer 7.5 build 7600 - Free Version. I can see nothing or bug on a utilization frame. What can I do ? Thanks.
Showing 3.5Mb/s sec over a T1 ???
For some reason in netflow analyzer sometimes i show over 3Mbits/s over a T1 connection, but when i do "show int s0/1" (the same interface) it shows the 5 min. average as 1.3MB's. I'm trying to figure out why its showing much more bandwidth at times than is actually going threw. Any Ideas?
Admin Operations Not Showing
Hi, I have all stuff configured (NetFlow 7 Professional) but some times we can't see the "Admin Operations" menu itens. I think this problem is related to a Java or JavaScript feature. When I'm using IE or Firefox, I have the same problem, and when I show the "Error Console" window in Firefox, it shows a lot of warning messages and one error message telling "objectRelesed not found". Do you have any idea, or possible troubleshot? Thanks.
How to use another mysql server for NetFlow Analyzer?
How to use another mysql server for NetFlow Analyzer? I want to change default mysql server bundled with NetFlow to another(may be running on another machine) how would i do this? Thanks!
NetFlow Analyzer - Accessing data from another application?
Is there a way to access the information externally via another application? For example we would like to pull reports on a per IP basis, how much bandwidth they have used over given periods of time? I realise your software may already do this, however we require this to be accessed via another internal application, and reports built of these. If this is possible, do you have any documentation on this?
useing the tool
can you use this tool on smaller home routers too?
Forgot Netflow 7 Pro password- how can I reset it?
Hello, I has been a while since I have needed to login into our Netflow server and I have forgotten the password, can this be reset or is it located soemwhere? I know the username. Thanks
VLAN Traffic after executing Route Cache flow
HI, I would like to know whether enabling Ip route cache flow on all the VLAN interfaces of the catalyst 6500 switch would cause a huge traffic on the Netflow serverand the Switch?? since enabling the route cache flow on the routed interfaces of the switch does not provide any netflow statistics.. Appreciate your quick response.. Thanks Hassan
Using Certificate Authority (CA) approved certificates for SSL in NetFlow Analyzer Enterprise
NetFlow Analyzer Enterprise edition uses SSL for communication between collectors and central server and also for web server connectivity to central server. The product provides options for using 3rd party security certificates for SSL connectivity as many organizations prefers their own certificates approved by any certificate authority. Steps to be followed for installing certificate from Certificate Authority (CA) for NetFlow Analyzer Enterprise is given below: NOTE: The steps are for NetFlow
netflow traffic
Hello, i have a question: how can i find out how much traffic is generated by netflow packets only ? i have some poor links and i need to optimize network architecture so that i do not cause congestion etc TIA, Raymond
Best Practices guide for Netflow
Hi, I've been using NetFlow for a couple months and I'm still not really sure how to use it to it's full potential. First, I'm not sure that everything is configured for best results. Which widgets are best to have for a "network snapshot"? Also, lets say I have a scenario where my network starts moving slowly. I open NetFlow, and assuming all my interfaces are sending NetFlow data, where do I start? What do I look for? I can see tons and tons of data, but I also seem to be missing some data. For
Needs a better notification system
Currently all you offer is traffic utilization alerts. Please add additional thresholds, like speed, volume, error rate, conversation, error rates, protocols, etc. Also, a "Clear" notification is needed once the threshold is back within limits.
Export?
Is there anyway to export the data within Netflow Analyzer (live) to a syslog server or anything like that? --j
how can i recovery admin's password ?
IP GROUP IN AND OUT traffic are same
Hi there, I am evaluating Netflow Analyser, I have set up a IP Group which excludes certain network address. However the report based on the IP GROUP seems to show the same numbers for both IN and OUT traffic. Please assist ?
Need BGP Help
How can I see the AS number (not name)? How can I collect NetFlow information only for a single interface without changing the settings on the router? I don't want to impact out existing Netflow server. If I can't filter which interfaces I'm capturing NetFlow data for, how can I make a correlation between the interface and the AS that is sending the data? Long story short, I'm trying to optimize my BGP routes to favor links with higher bandwidth, but I first need to see what ASNs are hogging all
not showing actual traffic and conversation with Cisco 7604
im trying to cofigure netflow in my cisco 7604 router. i have already putted the following commands: router(config)#interface gi 3/3 router(config-if)#ip route-cache flow router(config-if)#exit router(config)#ip flow-export destination x.x.x.x 9996 router(config)#ip flow-export source gi 3/3 router(config)#ip flow-export version 5 router(config)#ip flow-cache timeout active 1 router(config)#ip flow-cache timeout inactive 15 router(config)#snmp-server ifindex persist now in netflow analyzer, i can
failling to add a device in Bandwidth Monitor
i have a redhat linux gateway i want to monitor internet use in my network but i am failing to add a device in Bandwidth Monitor option it always says E2005: Not able to retrieve complete data from the MIB. please some one help
Auto Login in NetFlow Analyzer
Hi, We are trying to create some scripts to manage a few monitoring URLs so that they will rotate on a regular basis, but we are not sure how to login to the NetFlow Analyzer automatically. Can someone give some advise?
Access traffic data of IP group via CLI or Webservice
Hello everybody, we're using Netflow Analyzer 7.5 Pro Plus. Is there any way to fetch data from Netflow Analyzer via CLI (shell) or Webservice? I'd like to fetch the following information: traffic of an IP group within the last 6 hours traffic of an IP group in Gbytes, this month traffic of an IP group in Gbytes, last month traffic of an IP group in 95%, this month traffic of an IP group in 95%, last monthAre there any possibilities or examples? Kind regards, Mario P.S.: I got a hint, that there
Can not see egress traffic on Cisco 7613
Hello, I deployed NetFlow Analyzer in our network to monitor. My topology: My configuration: ! mls nde sender mls flow ip interface-full mls aging fast time 128 mls aging normal 60 ! interface port-channel 14 ip flow ingress ip flow egress ! interface port-channel 15 ip flow ingress ip flow egress ! interface gi9/9 ip flow ingress ip flow egress ! ip flow-export version 9 peer-as ip flow-export source loopback 0 ip flow-export destination 203.203.203.124 9996 ! But on NetFlow Analyzer, I can see
Cisco QoS policy configuration and DSCP reporting
Hello Folks, One of our community folks found an interesting behaviour in his router. Actually he defined QoS policies to treat different types of traffic in different priorities. And what exactly happening is, he is able to see the same conversation in two different queues and thus marked with two different DSCP values. When I say same conversation, I mean exactly the same source and destination IP addresses and Application. One of those is marked with EF and the another marked with AF32. However
How can i add devices at netflow analyzer?!
I can't add devices to start monitoing them & when i click scan button no devices are displayed though i have Cisco router, switches, gateways & voice gateways. What is the problem & how can i try the trial version or demo?! how can i get this application running?!
Next Page