Jboss config
I need to set up JRE monitor for Jboss which is running as NT service. If the parameter for monitoring are added as part of java additional parameters, the port assigned is not picked up. What is the addition needed in wrapper.conf and how to resolve this ? Thanks and regards, Vishwanath
SFTP
Hi, I use AppManager to monitor my servers, and now I need control in exist new files on SFTP Server. I try connect to the server, but I bot obtain sucess. Monitor return the next error: Could not establish a session with the host. Kindly check the host information Why this error? Regards, //Graveyard
Total Disk Space?
Is there anywhere in the database that the toal disk space is stored? I'm trying to calculate the capacity for each server, but the only values I see are the disk utilization percentage and the disk utilization in MB. In addition, the disk utilization percentage doesn't have any significant numbers (no decimals) so I can't reliably calulate the total disk usage...especially if a disk is under 1%.
Inocrrect Reporting 2
This is a follow up to a previous post - it won't let me add. Issue was a monitor was showing as up in a report from the management server, however the health was showing as red with a note saying that the monitor was down. While the issue with that monitor eventually cleared, it's now occuring with a 2nd monitor. Both are in remote sites and their "down" time was network related. The down clears, but the health and comments still say there's a problem. There are no events to clear. I've put the
Available space on disk?
The `Disk Utilization` portion of the reporting shows the MB in use at any given time. Is there anywhere I can go to see the actual size of each disk? I can try to calculate based on disk utilization and disk utilization (MB), since the percentage doesn't have any decimals it's going to be off by a few GB. Is there anywhere in the database that the full percentage (with at least 2 decimals) is stored? Or even the actual size of each disk?
SSH Key Gen
Hello, we are using Applications Manager 8 and I am trying to setup monitors using SSH2 authentication with keys. How do I create the ssh key for the appmanager account? I'm assuming I can create a key from the monitoring server and push that out to my hosts. Please advise Isaac Kim
Monitor Windows Server Processes and Services
hello, i cannot figure out how to monitor the availability of a windows server process or a windows server service. I have an application running on a server and I want to measure the availability of the application if any of one of 5 services stop running. Ideally when a specified service stops the server availability shows not available. The application does not have a web front end. It's got me stumped. cheers, Lerwick
Show current processes
When I use 'show current processes' for windows 2003 servers, nothing is returned in the CPU column. Is this by design or is it possible I am missing a configuration setting somewhere? I'm able to get the list of processes, the memory %, and the 'command and args' columns.
Dynamic URL in URL Sequence
Hi, i am trying to setup an URL-Sequence for an Internal site. The Login page uses Post Variables for username/password and some hidden fields. With an succesfull login the page sends a page that redirects to the destination. In this redirect page is an session variable called: si Basicly it looks like https://somepage/somepage.htm?si=123456 I need the si and the dynamic value on all subsequent sequence calls. I tryed to put $si into the request parameter to get the session id in this field to all
shedule reports for custom reports
Hi! I am trial user of AppManager 8. I have Perfomance Counter. And reports for its attributes was enabled. I can view these custom reports, but I cannot shedule them. Because when I try to choose Custom Atributes of Report Type in Shedule Reports, it tell's me that "No Monitor(s) available to generate reports. " How can I shedule my custom reports?
GSM modem
Hi we like to integrate a GSM modem, the modems on the supported list aren't easy to find thies days. Have you tested one of thies: -Multitech Systems mtcba-g-f4-ed-eu Cable/Radio Modem -Telit GT 863-PY -Falcom SAMBA 75 GSM Modem USB Stick Or do you have other tested gsm modems tjat we can find. Thanks Andy Andy Kessler
hardware we need to install aplcatation Manager
Pls, tell me hardware we need to install aplication manager to 1000 divices Luis San Martin
CPU usage by individual user
Can application manager monitor the CPU usage for each individual user on LINUX system? Haiqing Li
Where are SQL Server jobs in AppManager 8300?
Hello Support, We've recently updated our Applications Manager to version 8300 and noticed that we cannot see SQL Server Jobs status/details on the "Snapshot View" page. Could you please tell us where are they and how we can see their statuses? Thank you, Igor Raytsin Igor Raytsin
Where are SQL Server jobs in AppManager 8300?
Hello Support, We've recently updated our Applications Manager to version 8300 and noticed that we cannot see SQL Server Jobs status/details on the "Snapshot View" page. Could you please tell us where are they and how we can see their statuses? Thank you, Igor Raytsin Igor Raytsin
Event Log Rules and subsequent emails
I have an event set to notify me via email if any event log rules are found. This is great, and works fine, but it doesn't tell me the contents of the event log error. Instead, I have to log into Applications Manager and find the server, and view the partial description. Or, log into the server and get the error from the event log. Is is possible to get the actual event log message sent via email?
Event Log Errors
Is there any way to change who the event log errors get emailed to? On 3 servers I want them to go to one individual, while on 5 different servers I want them to go to yet another user, and on the remaining they should go to the default admin.
Need consolidated report in the form of .csv or .xls
Hi, I am using applications manager to monitor application server. we have a tomcat, is to be monitored.this is installed in remote linux machine. i have app manager installed in windows machine. My concern is that "how do we monitor tomcat for specific time duration?" and after completing monitoring process, i want consolidated report in form of *.xls or *.csv file. so from where i would get it? Priyank Shah
Need consolidated report in the form of .csv or .xls
Hi, I am using applications manager to monitor application server. we have a tomcat, is to be monitored.this is installed in remote linux machine. i have app manager installed in windows machine. My concern is that "how do we monitor tomcat for specific time duration?" and after completing monitoring process, i want consolidated report in form of *.xls or *.csv file. so from where i would get it? Priyank Shah
Send x number of emails per hour?
Is there a way to limit the number of alert emails I get per hour? For example, if a server goes down, and I'm monitoring 10 different things on it once a minute, at the end of an hour I'll have 600 emails waiting. It would be nice if there was somewhere to set a dependancy for each monitor that they could check. So if a monitor goes down, and it has a dependancy that also is down, it holds back it's alerts until the dependancy server is back up (and only performs the alert if it's still in the warning/critical
I AM NOT A CUSTOMER
Hello, I�m a 16 year old student living in Croatia. I accidentally downloaded �Applications Manager� and I�ve been trying to delete it many times and it somehow won�t work. I don�t know how I got this program, but like I said I accidentally installed it without knowing what it was. PLEASE help me uninstall it, as I have tried everything I possibly can. THE PROBLEM: every time I try to uninstall it I get a pop up saying ˝Directory Error! Uninstallation cannot proceed, the ˝C:\Program Files\InstallShield
tomcat slow response time
Hi Robin, According to your reply on my previous poster, I put the following url monitor as you advised. Hi Robin, According to your reply on my previous poster, I put the url monitor as you advised. //<tomcat-servername>:<port>/manager/status from the result. the response time is quite OK. Max is 340ms. it didn't match the result of the tomcat monitor. which max is 256,530ms. May I know how do you measure the tomcat response time? Do you have any suggestion? Thanks Best Regards Huabing From the
Log a Ticket(s)
It would be nice if we could utilize our existing TroubleTicket system - we'd still supply the host, username & password, as well as an insert statement that could be filled in with variables from AppManager.
Error in adding a wsdl monitor (web service monitor)
Hi I got following error when tried to add "http://10.51.52.100:6060/TravelBoxAdminService/wsdl" as a web service monitor Error: Generation Error: Command execution error org.apache.axis.wsdl.toJava.DuplicateFileException: Duplicate file name: users\WSM\10.51.52.100_6060_10000068\TravelBoxAdminService\WSDL_STUBS\src\travelboxadminservice\temp\Savable.java. Hint: you may have mapped two namespaces with elements of the same name to the same package name. at org.apache.axis.wsdl.toJava.JavaWriter.generate(JavaWriter.java:110)
Send Reports
Hi, I have Application Manager, to monitoring my Servers, but I hava a problem. I would like send reports to all users, but the e-mail sender may be gmail account. Gmail account need Security and Monitor not support Security on authentication to e-mail. It will be possible somebody help me? Regards, //Graveyard
MySql not displaying corrupt table list?
I have a MySQL monitor setup, and it seems to be running the command "show table status from `mysql`". How do I get it to check the server for corrupt tables, and report those that are corrupt?
Content matching with the File system monitor
File System Monitor monitors the changes in the selected files and directories like the size of the file or the % change in file size or the modification date. The monitor can also be used to detect a string within the contents of a file on a Unix machine that needs to be monitored. I have set up the content matching on our server of all fatal errors in a file, but I cannot find a way to exploit the results that do not seem to be available anywhere. Can you please tell me if the health of the monitor
Monitoring with SSH Public Key Authentication
I am using Applications Manger build 8100 and was able to configure a Linux monitor with plain Password authentication over SSH, however when i was trying Public Key Authentication it was failing with an error message "Check whether the PasswordAuthentication is set as yes in /etc/ssh/sshd_config file.Kindly set it as yes and restart the SSH daemon", I verified the configuration file and PasswordAuthentication is set to Yes, i searched in the forms and found that in some there were references to
CPU usage by individual user
Can application manager monitor the CPU usage for each individual user on LINUX system? Haiqing Li
Alternate or augmented actions after hours?
I'd like to have an alert perform an additional action if the alert is triggered outside of business hours. How can I do this?
MySql current queries
Is it possible to get a list of queries that are currently running when the server gets polled? I know you can run "show full processlist" and just remove out any records that don't have data in the "info" column. That would be very informative. It could go in the same general location as the 'Show all current processes' link that the Windows Servers have under Today's Availability.
Send Reports
Hi, I have a Application Manager, to monitoring my Servers, but I hava a problem. I would like send reports to all users, but the e-mail sender may be gmail account. Gmail account need Security and Monitor not support Security on authentication to e-mail. It will be possible somebody help me? Regards, //Graveyard
Send Reports
Hi, Hi have a Application Manager, to monitoring my Servers, but I hava a problem. I would like send reports to all users, but the e-mail sender may be gmail account. Gmail account need Security and Monitor not support Security on authentication to e-mail. It will be possible somebody help me? Regards, //Graveyard
SMS Alerting facility.
I'm trying to configure apps manager 8 to send SMS alerts to more than 1 contact number. Is it simply a case of having a comma separated list ? Thanks Tim. Tim Heap
I can't visualize the server snapshot when I monitor SNMP de
Hello, I have configure a monitor for a firewall Cisco ASA, and I can't visualize the server snapshot. I wonder if this is normal or it is a bug. I have change also the browser and I can confirm that it doesn't work with Explorer and Firefox. Thanks Nicola Nicola
Alert update not activated
I had an event setup on an alert that would email me when an event became critical. As it was emailing me every minute, I added another event (email another user) and saved the configuration to several other monitors as well. However, the monitor only emailed me...the other user never got any emails. I would've expected them to begin getting the emails. Suggestions?
Alerts
Hi, I need setup my Application Manager, to send every four hours a mail notification(Alert), but I don't know, how can I do. Is possible some people help me? Regards, //Graveyard
New functionality question
Hi all, Is it possible to add the following functionality: - When the status changes to warning or error (failed) a sound is played e.g. a .wav or .mid file is played through the browser page (for instance the Plasma View). - This audible 'event' should be configurable for repetition and muting. This would be a great asset to the monitoring functionality and I miss it in the current release. I don't know if I have to use a different channel to ask for extra functionality but i saw a similar topic
Suggestion: thresholds in use
If I'm on the View Thresholds page, it would be nice to be able to see where each threshold is currently being used. That way if I want to rename or re-use one I can see what it will effect.
Missed monitored events
Continuing to explore the options AppManager has, I was looking at the MySql monitoring and noticed there wasn't any reporting about the replication I have going on with one of my servers. I dug through the logs, and saw an error with permissions for the user I had configured. I fixed that, and promptly got replication stats. Q: Is there anywhere to view events that aren't being captured? Or do I have to dig through the logs and look for errors?
Next Page