how to manual insert smtp configuration into mysql db
Hi, Does anyone have any experience to insert the smtp configuration into MySQL db manually instead of doing it from the AppManager admin interface? The reason I need to take this route is because the smtpTest.bat gets the connection refused, but we have .net application is able to send the email from the same server via the same smtp server. Basically the smtp server is able to relay the email from this server. The only issue here is we can't configure the smtp server from the AppManager interface.
Installation of APM Insight for .NET Agent
Hi, Pls share the setup file and installation procedure for "APM Insight for .NET Agent" thanks & br Gurmeet
How to configure a monitor for printed pages.
Hello, Please, i need to configure a monitor for number of pages printed in one day in AppManager 10. I've been searching with no luck, any ideas? Thanks in advance. Cesar
Monitor Weblogic heap size
Hi Support, I just downloaded and installed the Application Manager 7 to monitor my weblogic 8.1 server. After added the monitor for Weblogic, it shows the "response time" on the page only. Is it possible to get the information of the heap size on the same page? Please advice. Thanks, Ryan
Could not configure JBoss server monitoring in ManageEngine 10
Hi Support, I Just started using ManageEngine 10..... I'm trying to add JBoss, but couldn't. In older Jboss 4 (or) 5, we need to deploy either "jbossagent.sar" (or) "http-invoker.sar", but currently I'm using JBoss AS 7.1.1, what need to deploy in this?
Hello everyone need help
Hello i need some Help in Application Manager 9 we want to Monitor the Bluecoat Server services how it can be configured through SNMP... Regards Narendra
Integration between App and OpManager
Hi, I'm trying to integrate OpManager and AppManager, but I can't access the OpManager devices from AppManager. I'm using the trial version of AppManager 10. I don't know if this is the problem. Thanks
Migrate application manger from Mysql to MS sql server
Hi, Is it posible to migrate application manger from Mysql to MS sql 2005 ? Is there a procedure ? Regards, joli-coeur Wouter
migrate version 9
how can migrate of appmanager 8.6 with mysql and that is manager server to appmanager 9 with mssql,
Migrate 8 to 9
Hi everybody, Is someone have migrate from 8.6 to 9.0? I heard we can migrate to MSSQL Server? What's the performance between the two database? Is there a "white paper" or a "migration guide?". We have a Manager Server with 2 managed server (soon 3) (601 monitors) and we don't want to lose any data ;) Is it a modification in the licence? Tank you for your answer. Regards, Jerome Linxe System Ingenior OFAC - Geneva
Applications Manager & SQLServer
Hello, I would to know if it is possible to install the Professional Edition version with SQLServer database, instead of MySQL. Is it possible to make a porting from MySQL to SQLServer ? Best regards. Alessandro de Sanctis (Italy - Rome) Alessandro de Sanctis
migrate of version 8.6 a 9
how to migrate from version 8.6 with mysql to version 9 with SQL Server regard being had a managed server with 4 node
Appmanger upgrade from version 8 on mySQL to version 9 on MS SQL
Currently running Appmanager version 8 on mySQL 4.1 and am upgrading to version 9. Liking the fact we can use MS SQL for failover, etc.. but need to know how to convert the data over so we don't have to re-add the monitors.
MySQL
AppManager uses, as I see it, MySQL today. Will it be possible to use MSSQl instead in the future? Please return a link for a roadmap if this exist, thanks in advance. Regards Martin
Using MSSql instead of MYSql?
I am wondering the possibility of using MSSql as the backend database on a remote system instead of using MySql on the same system that the Applications Manager is running on. Currently we are running Applications Manager on Linux where we'd like to keep it. But in our environment, I'd like to pass the database off to a Database Team to support (in house supported databases are currently Oracle, Sybase, DB2, MSSql, Informix) This would also take some of the load off of the Linux system where Applications
Changing MySQL to MSSQL using AppManager 9
Hi AppManager-Support, after the initial installation of AppManager is using MySQL as default - the Version 9 can use MSSQL as database. So i want to change my database from MySQL to MSSQL. How can i convert/transfer my data? Greetings, Albae
Convertire DB MySql in MSSQL
Good morning, I wanted to get clarification on how to make my MySQL DB physically installed on the machine where there ApplicationManager in a Microsoft SQL 2008. There is a utility that converts the I in MSSQL DB? The question arises from the need to convert my server where AM is, in a probe that will be managed by IT360. thank you very much
Reset next poll time?
We have an issue where someone set the system clock on our server to 2013 which now has all of our monitors set to next poll a year from now. We've tried unmanaging/remanaging the monitor, triggering a manual poll, nothing seems to reset the last/next poll time back to current year. Is there a way to reset the next poll time for all monitors?
The SSL Port(am.ssl.port) 8443 is occupied
Dear All I Need Help I Got This Error after i installed the Manage Engine Application Manager 10 The SSL Port(am.ssl.port) 8443 is occupied. Change the port in conf/AMServer.properties
MySQL to MS SQL Migration for Applications Manager
Hi, Is it possible to migrate data from an existing Applications Manager installation using Mysql to use an MS SQL Server backend instead? (backup and restore or something similar?) Alternatively, even if some of the historical data was lost, is it possible to export all monitors and config to a csv, and reimport after switching to a SQL backend? Cheers, James
real browser monitor website login
If i want to monitor to see if our customers can login to our website. Would either the real browser monitor or the HTTPs-url sequence work for that? They have to enter an username and password to actually finish the login process
SAP Authentication with mandate
Dear support, I ciold not login to the sap CRM server 7.10. I tested SAP connectivity by SAPDebug.sh script from /opt/ME/AppManager10/bin/troubleshooting folder, but it gave me error : "Unable to establish connection with the SAP system. Check if the User Name and Password is correct." All necessary parameters I have set using this post: http://forums.manageengine.com/topic/appmanager-10-sap-server-monitor. It seems to me, that I have to set a mandete number for sap autentication. Best regards,
Cannot set primary keys (sql db monitor) after update to 10.6
Hi everyone. I've experienced problems on setting primary keys in a new db sql monitor after updating ME Applications Manager from 10.2 to 10.6. The error message is: "Unable to find the primay key for openquery(PRODEONE|'SELECT. To show the query output alteast one primary key has to be selected.To select a primary key click the "Primary Keys" link in the top of the openquery(PRODEONE|'SELECT table displayed." Unlike version 10.2, the new 10.6 doesn't display result table when that error occurs
SAP JCo 3
Dear Sr, Have you any plans to support SAP Java connector version 3 in AppManager? Current solution based on SAPJCo2.1 is not workin on SUSE Linux Enterprise Server 11 SP x86_64. Java connector couldnot load needed RFC library. I have tested in on test system with evoluation license. Thanks in advance!! Best regards, Alex.
Monitor SQL logical disk space
Good afternoon. First of all grats for such great product. I have a Windows 2008 R2 with SQL 2008 Cluster with several Instances configured. Each Database is configured with a Physical disk drive letter, and the inside we have mount points to the Data and Logs disks What i'm missing is the abillity to monitor the free space for these Mount Points. Is this possible on App Manager, or in worst case, on Op Manager? I found some references on how to monitor mount points for Op Manager, but
Ping Monitors in Application Manager 10
Hi After the upgrade app9 to app10, I realized that the information received from ping monitors Is wrong. More clearly if the server is down, it is seen that ping service is up. Please comment on this problem. Thanks a lot. Boroujerdi
How to change logging directory?
Hi, Is there a way to change the root logging directory for all the log files that are written to [Applications Manager Home Folder]\logs? I have attempted to change the configuration in C:\Program Files\ManageEngine\AppManager\working\conf\logging_parameters.conf and am.log.dir=F:/applicationsManager/logs/ in C:\Program Files\ManageEngine\AppManager\conf\AMServer.properties to no effect. In my enterprise environment all log files need to be written to a specific drive. Cheers, Damien.
How to extract the monitored elements and it IP's address (which we probe from)?
Hi, I need to extract all monitored elements or endpoints information from the current running AppManager (version 9.x). I need the name and the IP addresses. If possible what is being monitored (CPU, space, paging, etc..) and alert thresholds. Any idea how to capture this? Other than manual noting it down from the web front. Thanks.
Monitoring Interface selection
We have a server that was added as a Server 2008 monitor to AppManager by its hostname (not the FQDN). This server has two network interfaces, each with separate DNS entries. NIC #1 resolves correctly to hostname.domain.com and NIC #2 resolves correctly to hostname-bkp.domain.com via NSLOOKUP. Alias's are not used for this server. The monitor was added successfully but I noticed that AppManager is monitoring on NIC#2 vs. NIC#1. When pinging the hostname or or using NSLOOKUP the name always resolves
Unable to uninstall Applications Manager
I am unable to uninstall Applicaitons Manager from my m/c. These are the steps I did. 1. I tried to uninstall from Start/Programs/ManageEngine Applications Manager7/Uninstall Applications Manager. -> Then it asked me to stop Applications Manager and do uninstall, 2. Now I stopped it and tried then it says. "Directory Error! Uninstallation cannot proceed, the C:\Program Files\InstallShield Installation Information\{e6aea16f-0377-42b0-b4eb-7fa3dbbfdfaf} directory exists!. Check if it is empty and delete
Need to add application log monitoring
I have need to add Application log monitoring and if any configure logs alert found then mail notification from App manager.
QUERY TO OBTAIN MONITOR RAW DATA FURTHER JUST STANDARD 6 HOURS.
Hello i want to be able to recollate monitor RAW DATA far beyond just 6 hours (default maximum detail time) Is there any way to achieve this? I´m polling just PING command type monitors to a 5 min polling interval, APP MGR v 10 just allow me to consult 6 last hours so i want a query or someting in order to increase this information gather,. Thank you so much.
REST API ListDashboards not working
Hi, M not able to use ListDashboards REST API. Its giving <AppManager-response uri="/AppManager/xml/ListDashboards"><result><response response-code="4008"><message>The specified request URI is incorrect.</message></response></result></AppManager-response> Also an not ablle to find any file like ListDashboards.xsd @ ManageEngine\AppManager10\help\RESTAPI\xsd Source: http://www.manageengine.com/products/applications_manager/help/administrative-operation/list-dashboards-api.html
Script Monitor
I can't figure out how to setup one of these up for the life of me. I have a working script that creates its own output file in /tmp/. The help on the web and in the help docs for setting up a Script Monitor is fairly worthless and isn't specific at all. How can I get more help on this? Thanks, A Cline
SNMP Graph showing wrong matrix
Hi, Recently configured SNMP for all our servers and in that CPU & Memory Utilization graph shows always 100% but while checking server it shows 45%.... Below is our SNMP Config com2sec adventnet default <community String> group monitoring v1 adventnet group monitoring v2c adventnet view all included .1.3.6 80 access monitoring "" any noauth 0 all none none Please let me know the reason for showing the wrong matrix... Its
Warning action not occuring when Critical threshold breached on first poll.
Hi, I have have a threshold profile defined as: Critical Severity : Monitored value is > than the Threshold Limit 40 Polls to try 2 Warning Severity : Monitored value is > than the Threshold Limit 30 Polls to try 1 Clear Severity : Monitored value is <= than the Threshold Limit 30 Polls to try 1 When the moniroted value = 35, I correctly get a Waring Alert. But when the monitored value jumps from 25 to 45 between polls, the warning alert is skipped even though the value is greater
Oracle monitor error
Hi, i added a oracle monitor two weeks ago,it works fine.but the monitor report error: Unable to connect to Oracle Server. Error Message : Protocol violation how this happens?
Applications Manager mobile web client
I just learned there is Application Manager mobile web client for android, but I would like to know where can I download it? And how to I implement this feature to my current Applications Manager? Thanks.
SNMP Agent is not running in the System. Kindly start the SNMP Agent for Monitoring
Hi All we have get problem abaut SNMP Agent at AppManager we have error "SNMP Agent is not running in the System. Kindly start the SNMP Agent for Monitoring" that error just display from branch server but on HQ server that error not display that error able to clear by it self about 1 minute please give us advice thanks
Monitor SOAP Response
It would be nice to be able to just send a SOAP message to a url and check for a response without the need of pointing to a wsdl. For example we have several services on Message Broker, our applications sends SOAP messages to the ESB router URL and gets a Response after the Message Broker has processed the message. The flow within the Message Broker could be calling/using several different services.
Next Page