SMS Action - Send Alarm to more than one Mobile Number
Hi, is it possible to set up one SMS Action and send the Alarm to more than one Mobiel Number? If i setup the SMS Action and fill the field (To (Mobile No) i can only put one Number into the field. Is there a special format to fill in more than one Mobile Number? Thanks for your help Erik
Web Service monitor: custom certificate
Hi, We need to create a Web Service monitor using a custom certificate (will be queried using https). Our question: Where do we need to place the custom certificate ? Do we need to place it in the same keystore than the one listed in following link ? https://apm.manageengine.com/use-own-ssl-certificate.html Thanks Kind regards Alain
SMS modems and clickatell
Can we get a better list of modems. Most of these modems on these lists are not with carriers in the US that a lot of us use. Also if i wanted to use a service such as clickatell or bulksms how can i set that up, thanks. https://forums.manageengine.com/topic/update-the-list-of-sms-modem-supported-please
OpManager plugin
I know when I added the IPAM/SPM module into OpManager I was able to take info from the existing stand-alone installation and integrate it into OpManager as the plugin...can the same thing be done with AppManager? I have a stand alone running and would like to tie into OpManager's interface. Thanks!
nginx monitoring?
With most other common webservers covered I was wondering if nginx is planned at some point in the near future? According to some reports it has taken over the number two spot behind Apache becoming more common than IIS. http://www.infoworld.com/t/application-servers/nginx-overtakes-microsoft-no-2-web-server-183079
Please Please Please Fix IP Update
The only way an IP update works is via the command line and an applications manager restart. using the update ip action via the GUI does not work This has been going on for years with no fix. There is no point why you cannot do both of the following A) Have a setting to NOT CACHE hostnames so you can easily just update the dns w/ new ips B) update the IP of a server via the GUI Since we run on AWS our IP's change constantly and has become so laborious and error prone of updating IP's applications
Console AppManager is not refresh
Hi all, I'm currently implementing a company AppManager 11. We have 1 Console and 4 nodes or managed servers. For example one node shows a drop but then is up. However, the console does not update this information and continues to "red". Could you help me or give me some tips why not update. Anyway I checked the settings in: Admin ---> Customize ----> WebClient, and the "auto.refresh" is in 1 minute. Also all monitors are set to 5 minutes of polling Thanks and Best Regards
Error when starting a Application Manager 11 (Posgresql error)
Hi, I just installed the AppManager 11 on 2 servers and both servers are giving me an error when starting Platform details: CentOS 64 bit AppManager 11: Linux 64 bit User when installing: root The following error is observed: ########################################################################## Note:It is recommended to start the product in nohup mode. Usage : nohup sh startApplicationsManager.sh & ########################################################################## AppManager Info:
error starting server (mysql error) on Centos 6.3
Hi Support We try to install Apmanager11 in Linux Centos 6.3. Installation successful, but cannot start the server with error from logs dir; Fri May 30 10:41:18 WIT 2008 : Mysql daemon is not running on your Linux machine.Please start the daemon and retry Fri May 30 10:41:18 WIT 2008 : Unable to create database. Exiting Applications Manager Strange..because we choose postgresl as DB. reinstall it with non-root user account, and add host entry at /etc/hosts. But still error. Please help.. i cannot
Application Manager has encountered a problem and needs to close.
Please give solution for this error ..........
Not able to switch to secondary Mail Server when the primary mail server is down.
Hi I've configured my secondary mail server to function as backup server. So that when the primary mail server is down, secondary mail server will take over. However, it doesn't work. Got this message when the primary server is down. "The action Email address has failed because the email address associated in the E-Mail Action is wrong/not present. The action email adress has failed because the email address asscociated in the E-Mail Action is wrong/not present.com.sun.mail.smtp.SMTPSendFailedException:
NetApp
How to monitor NetApp with Application Manager.
Monitors stopped showing data
Recently, after running appmanager for several months, some monitors are now not showing any data. It was limited to Windows clients but now Tomcat clients are also a problem. After running "poll now" all is well again - but after a few days the problem will reoccur. Do you have a fix? Many thanks, Daniel.
How To Trigger Alert Based on Results from A Oracle Query?
Hi there. Is there a feature in Application Manager that will automatically trigger an email alert based on the results of an Oracle Query? If the query returned the result "Failed", I want AppManager to automatically trigger an email alert. Can it do that?
ApplicationsManager on MSSQL2012
Hi, To my knowledge Microsoft SQL 2012 is not (yet) supported as db platform for ApplicationsManager. Can someone confirm this, and possibly tell me in what time it will be supported? Kind Regards, Eric Bolderink
iis and application pool
hello, I configured under app manager an IIS server, I read that it's possible to monitor the app pools, how can I do it? is there any list regarding all I can monitor regarding IIS? thanks
Windows monitor account gets locked out
A problem started yesterday where the account used to monitor Windows servers via WMI keeps getting locked out. There is no other application using this account, only Applications Manager. I figured that it might be a problem with the AD account, so I created a new one this morning and started changing credentials. Everything was going well. All the monitors which had previously reported critical health status were now repoting that the server was OK. Imagine my horror when I discovered that this
RCA and Error Message in Alert when Monitor is down
I have been longing for theese features for quite a while now. We are a consulting firm and help a lot of customers to install and set up Applications Manager for monitoring the availability and health of applications using custom monitors and scripts. Theese script call automation frameworks in order to perform tests towards the customers apps. When an error ocurres, we set the script_availability and script_message attributes in the result file in order to trigger downtime and an alert (this is
Cannot add Esxi into AppManager
Hi, I cannot add my Esxi Virtual Machines into the AppManager. It says that the port should be https port which is 443. But I want to add the port as 80. So it doesn't let me to add my Virtual Servers. In this case what should I do ? Best Regards,
File System Monitor Question
I'd like to monitor lots of folders on our file server looking over a period of time at growth and trending. I tried to set it up, but, it didn't work. In the scenerio below, please let me know if it is possible to monitor these folders: ServerA has a windows Share called 'Data' (Share permissions set for Everyone). Under Data are 100 Sub-folders that are not shared, but, NTFS permissions are assigned. I'd like to monitor the sub-folders for space. I tried setting up the monitor using local server
cannot monitor file or directory
Hi, I wan to monitor my folders via application manager. while I enter the required data as below : Type: Directory Directory Location : Remote Server Choose the Host : the one that I want to monitor Directory Name : /book It gives me an error message : Folder does not exist. Actually the folder is exist and is shared among users who are working with. Why is that and any idea? Best Regards,
Oracle iPlanet
Hi, How do we monitor Oracle iPlanet Web Server? Thanks, Kumar
appmanager and opstore
Hi, I was wondering if it is possible to send notifications from opstore to appmanager TIA Rene
App Manager scanning issue
AppManager is scanning subnet 192.168.9.0/24 which is generating many alerts. Could you please help me in stopping the scanning alerts ?
monitor if any files in directory older than one hour
we have an application that processes files in a certain directory. If it errors out it will leave unused files in the directory. If it runs successfully it deletes all the files in the directory. Is there a way to use the file/directory monitor to report back if there are any files or even any older than an hour? thanks.
Proxyserver user account locked --> all server resources are eaten up
Hello, I am monitoring some URL's on external servers. To do so i configured a user account / passwd for my proxyserver. When this user account get blocked for whatever reason, these monitors will fail. That quite logic ;o) However, when this happens all server resources are being consumed. The application hardly responses, an all other monitors are slowed down into the extreme. Does anyone not how to prevent this? Might this be a bug? Kind Regards, Eric Bolderink
AppManager - alerting down network interfaces
Hello, We seem to have an issue with alerting when a network interface is down. When we pull a plug on an interface, AppManager shows the interface as down - but we can't seem to generate an alarm or an action from this. When configuring alarms from the interface, we only get the option of health and utilisation. Is there anything I'm doing wrong? Many thanks, Daniel.
Applications Manager 11 (build 11030) and Server Process Templates/Service Templates
Hi, we've been using the Server Process Templates and Service Templates when monitoring specific processes and services for our Windows servers (both physical servers and hyper-v servers). After the upgrade to version 11, we can only see some of our physical servers, and no hyper-v servers, when adding new processes. We have the same problem when adding new services. We are running Windows server 2008, Windows server 2008 R2 and Windows server 2012. Any suggestions?
how can I query monitor name with sql script ?
Hello all, I have a sql script , it only query url and username from table am_url. sql script: SELECT * FROM am_url Where userid like '%Finley%' but this table doesn't have monitor name, If I want query monitor name , which table can be queried ? Thanks. Finley
Default login and password do not work
I am trying to install the AppManager add-in and the default username and password of admin, admin does not work. Any suggestions?
monitor oracle locks
i want to monitor ROacle locks. More specifically i want to monitor if any session is waiting longer than 3 minutes. HOw can i set such an alarm? OR better yet what is the best way to monitor this type of issue. I know i cna run a SQL query like this to get my answer but is there a way besides the database query monitor. select 'Count' as PK1,count(1) from gv$lock where request > 0 and ctime > 200
Alarm setting in enterprise edition
Hi, A bit confuse on the where to configure alarm in enterprise edition setup. Below FAQ clearly indicate role of manage server to collect and send alarm. Admin server role is to provide single view and reporting. but the help document page 687 saying that you can create monitor group on admin server and later configure alarm base on the group. Can help to clarify where should the alarm is set? manage server or admin server? Naharuddin Great Eastern Life
Remove Unsolicited Traps
Hi Is there a way to remove the list of alle the Unsolicited Traps ? /Jan
client.log on Applications Manger 11
Hi, I'm getting frequent warn-messages on client.log about my 11g wl-monitors: 07:27:56:326 CLIENT: WARN: oracle.j2ee.ws.server.management.mbeans.WebServicePort[wls:name=TranslateServicePort,J2EEApplication=soa-infra,WebModule=b2b,j2eeType=WebServicePort,Application=soa-infra,WebService="{http://xmlns.oracle.com/integration/b2b}B2BWS_TranslateService"] javax.management.MalformedObjectNameException: Invalid ending character `]' at javax.management.ObjectName.construct(Unknown Source) at javax.management.ObjectName.<init>(Unknown
how do you upgrade from appman 10 to appman 11
and how do you migrate from mysql to postgres your data
AS400 job monitor
Hi, we need to check if specific jobs are running or not... i know about checking status but i cannot configure any alarm if that job name is running or not. Any idea? Thank you
Applications manager reports
Using URL monitor. Problem with ISP over the weekend. Monitors report monitored sites as down/red, but it was a local problem. How do I account for this in reporting. Any way to edit data/change an unavailable to available?
Oracle Tablespace - Used bytes - wrong value
Hi, Applications Manager (build 11000) reports that one tablespace used 190TB (!) of memory, while there is only 400 GB allocated. Please see screenshot attached. Best regards, Andrzej
Importing a certificate from internal Microsoft CA
Hello. I am currently in the process of confguring a new install of Applications Manager. I would like import a certificate issued from an internal Enterprise Root CA (Microsoft Windows Server 2008) for use on the Applications Manager server. Could you please provide guidance on how to go about this? thanks! -john
Changelog for new builds?
Hello, Is there any documentation as to what is included in new minor builds? I cannot find this information anywhere.
Next Page