Mail Enable a Single Contact
In AD Mgmt Tab, I click on Contact Management, then choose Modify a Single Contact, and choose Modify the specific contact. On the Exchange Tab, it says No Mail Properties Defined. How do I go about mail enabling the contact? I am running the professional version. Thanks.
ErrorCode 31 on recovering deleted user
Our helpdesk technicans can't restore deleted users. It shows errorcode 31. the ad manager works with a domain admin account. Version 6510
How to reset Built-In HelpDesk Account Password
We can't login with the built-in helpdesk account. The password fails and\or is wrong. When I login with the built-in admin account (successfully), I can't find any where that I can change that helpdesk password. Online help only talks about how to change the password while logged into the account, which we can't get logged in with. There must be a way while logged in with the admin account to be able to change the other built-in accounts password.
Is it possible to exempt Automation tasks from the Notifications?
Currently when an automated task executes, it sends an email to the same group that receives notifications for all manual request executions. Is it possible to change this? Thanks, Daniel L.
Request to add features to the "Notification Rules"
Hello, The notification rules are a very important to an efficient workflow. Can y'all add some categories for Notification Rules such as "When Request is closed with an error" or some specific notification for when the Execute and Close actions are separated (anytime there is an error with one of the objects). Additionally, it would be very nice to be able to format the messages a lot more. They are difficult to read and don't contain the ability to format the emails very much. Thanks!
Select closest DC when making a change
As a global company with 40+ domain controllers spread across ~35 sites our field services personnel find that making a change to a user or computer account takes up to 20 minutes to be reflected locally. I'm assuming that is due to change taking place on the DC that is first in the list. The pushback from this group of locally based technicians along with other limitations we find in ME is forcing us to look at other products unless someone can tell us of a workaround. I'm not sure that this issue
Not able to "add/remove columns" from reports after upgrade from 6300 to 6520
I recently upgraded AD Manager Plus from 6300 to 6520 and after the upgrade I can't Add or Remove any Columns to my reports. I can still move existing Attributes Up and Down. But not Add or Remove any Attributes. Are there settings that I have to do after the upgrade to have this working again? I can't find any information about this problem in the forum. /Fredrik Söderman
Ability to copy group membership to new users during user creation
I would like a way to populate a field (such as "CopyFromSamaccountname") in a csv that would create the new user with the same groups as the user specified. Currently it is very cumbersome to copy group membership from one user to another, for 30 users at a time. Thanks, Daniel
Recover Deleted Users
When I recover a deleted user, not all attributes are being restored ??
Schedule An Account to Be Enabled
Currently we receive notification from human resources (HR) a couple of days prior to an employee starting work. We create their AD account right away, and disable the account until their start date. Is there a way for ADManager Plus to automatically enable an account on a specific date? For example, we get notification from HR on 10/01/16 that a new employee will start work on 10/14/16. So on 10/01/16 we create the new AD account, and disable it. Then we have to create a reminder to enable the
Is there an advanced search? Install SSL on ADManager Plus
I'm trying to install a Go Daddy wildcard ssl certificate on our ADManager plus installation and looking for guidance. The Search function here doesn't seem to let me limit the results to a given product specific forum so I'm having trouble sorting through the noise to find relevant results. Can anyone either help with the search system or point me in the right direction as far as getting the GoDaddy .crt / .p7b certificate installed on our ADManager Plus installation for handling AD password resets
Report for exchange usermailbox rights
we can set mailboxrights for users like full Access, etc. but we can not see, how are the rights on a mailbox at the moment. We like to have a report, where the technicans see which mailboxrights are on the usermailbox and can select it to delete or modify. regards, Jörg_L
File Server Folder Permission
Hello Guys, We are migrating file server to different domain from another domain. Therefore we need to apply same permission with new user accounts. To do it, we need to take an report with existing permission on folder hierarchy . Which product can we use for it ? Regards CHinthaka
User Creation Template - Send login info to manager
Hello. Looking at User Creation Template. I would like to have the template send a mail to the manager with Name, Username and Password. I suppose this has to be done by script. Anyone have an example? Thanks / Torsten
User Creation template - Error enabling Lync services
Hi. I have started creating a User Creation Template to create new users. I have tested the creation several times to fine tune and check if everything was okay. Suddenly I got this: Error while enabling Lync services for the user - System.Management.Automation.Remoting.PSRemotingTransportException: Starting a command on remote server failed with the following error message : The request for the Windows Remote Shell with ShellId 3A2C4841-88C6-45FB-8E23-43613655338D failed because the shell was not
Create Single User issue
I have a helpdesk technician with all roles (except Super Admin) who is having a problem when attempting to create a new user. When selecting the Account tab, the password options are gray and he cannot change the default selection (Same as user logon name). This fails due to Password Complexity Requirements. The New User creation template that we have is configured to use either Random Password or Type a password. Why does the helpdesk technician not get the option to choose one of these?
Set Exchange Out of Office Reply for Daily, During Off-Work Hours
Is it possible to set an Exchange (Outlook) out of office reply for every day (M-F) from 5pm-7:59am? Right now our employees are manually turning on the out of office reply every night before they leave for the day. Is there a way to automate this? Any guidance is appreciated. Thank you, Bradley Toy
Can't add new/copy Technician
Hello, I am trying to create a new technician however when I enter the username in the "select AD user" field it returns no results. I click on the "choose" link and enter the username and it returns nothing. However, the user does exist and is included in a user report. One thing I noticed was that new users are not shown when trying to add as technician but older users can be added. Am I missing something obvious here? Any help will be much appreciated. Regards
Automate sending emails to distribution list members
We are wanting to send emails to the members of each distribution list, asking them to reply if they wish to be removed or if the list is no longer needed. The body of the email would have this statement/question and list the name of the distribution list, the email address of the distribution list, and the members of the distribution list. We created a CSV file created from a report in ADManager that lists all of the distribution lists, their emails addresses, and the members of each list. Using
Ad Group Report are incorrect!
Part of our yearly user review, I have to generate these reports: 1. Go to the AD Reports tab -> Group Reports -> All Groups. 3. Hit the Generate button. 4. Select Add/Remove Columns to the right of the page. 5. Put the columns in the following order: a. Group Name b. Description c. Members d. Manager 6. Select Description near the top right of the page and enter “Network Folder Access”, then hit OK. Se Select Quick Search on the left, and enter
Event source
What is the event source for ADManager Plus ? Thanks.
SIEM solution
It is SIEM solution? Thanks.
Ports used by ADManager Plus
Which ports needs to be opened on Firewalls for successfully configuring/running ADManager Plus?
ADManager Plus disable user not work
I try use ADManager Plus to disable a user in active directory but when recheck in active directory, user still working and not disable. Any ideal
Scheduled Reports without Folder creation
Hello all, I haven't been able to find an answer to this question so far: Can scheduled reports be exported to a specific location without it automatically creating a folder structure (Reports\Report\ etc) Thanks, Tom
Language Pack
Hello, We've just bought ad manager plus, and we would like to know if you plan to make available in French language pack. Regards
ADManager Plus rolls out build 6520
ADManager Plus build 6520(September 2016) We are delighted to announce the release of ADManager Plus 6520 build with PPM. Please find the new features, enhancements and fixes included in this build, New features: Office 365 account creation for AD users: You can now provision Office 365 accounts, individually as well as in bulk, for the users already present in your Active Directory. As per your need, you can, Create user accounts in Office 365 without assigning licenses. Create user accounts in
Auotmaitc Script
Hi i need a script to move an user to an another OU , and in the same time, all Groups in the user objekt are removed and the user are disabled. I need this for a workflow order - Change User -> custum script. thanks for your help Stefan
SNMP configuration
how to configure SNMP?
Deleted users removes AD-account including Exchange mailbox
Starting today we're using the Exchange functionality in AD-manager for creating emailaccount during the creation of new Active Directory accounts. This is working great. However, our servicedesk who creates and manages the Active Directory account should not be able to deleted mailboxes. The deletion policy is set to prevents the servicedesk from deleting a user mailbox. The strange now is when the servicedesk deletes an user through AD-manager the mailbox belonging to this users is deleted as well.
NTFS Reports
Hi I am trying to generate an NTFS Report / Permissions on Folders report, but the permissions are not displayed at all. I know the parameters of the report are correct because I can see it cycling through the folders to the specified subfolder level as the report is being generated. As I said, no results are displayed, but I can see that it believes there are a significant number of rows returned (i.e. 'Showing 1 - 50 of 240'). Also, if I export the results to a spread sheet for instance, I can
AD Group Membeship Report
I have been looking for a way to run a report for all members of a group in AD. These are typically requested for Auditing purposes. Is there some type of report specifically veered towards this? It would be great to have this option.
Home Folder Report?
Hello everyone, Is there a way to run a report that will tell me which users are using a specific home folder / profile path? Am trying to generate a list of those using an outdated one, so as I can move them over to the new path (which I have found out how to do in ADManager). Thanks, Craig
Trying to restore DB to a new server
I am trying to restore the db to a new server. Its postgres. The database will not restore. I keep getting "Problem while restoring db". Can anyone point me in the right direction as to why this is happening?
Automated Backups of AD Audit Plus
Good Morning, Can someone tell me where in the AD Manager Plus application you can scheduled automated backups. I am seeing on my server that the system is doing an automated backup the first of every month. I don't see anything in the task scheduler so I am assuming its somewhere configured in the app. Thanks!
AD Manager Reports for Users in a Group
I am looking for a way to create a report for pulling all members of an AD group. I have been looking in AD Manager Plus but have had no luck. Thank you. Darrell
Report ADManager!
You can create a report of computers, performing the filter by IP range?
Custom script to remove telephone details from user when disabled
Hi there, I have a requirement to have telephone details removed from an AD user when the automation policy disables them. Both telephone and otherTelephone attributes. The reason is due to having to free up the numbers for future users and having duplicates in AD breaks our phone system. Any help would be greatly appreciated. Wayne
Export Exchange mailbox to PST
is their a feature where you can export a mailbox or group of mailboxes to a pst file. we want to delete the mailbox but keep their mail in a PST for Terminated users.
ADManager Plus rolls out build 6510
ADManager Plus build 6510 (August 2016) We are delighted to announce the release of ADManager Plus 6510 build with PPM. Please find the new features, enhancements and fixes included in this build, New Features: Exchange auto-reply settings: You can now enable automatic replies for the emails sent to your users' Exchange mailboxes using this feature, which offers options to: Enable/ disable automatic replies to senders from your organization. Enable/ disable automatic replies to senders from other
Next Page