Monitor CPU and Memory
Hi Is there any template ready, or know where to find the MIB for monitor CPU and Memory 3Com Switch 4800G 48-Port. Regards,
Unable to clear very old alarms
Hi, We have a probe talking to a central server in our OpManager setup. On the central server we have 3 alarms that were generated one year ago, on the central server we can only acknowledge the alarm and not clear or delete (as expected), on the probe server the alarms are not listed at all in any of the views (e.g. Show All Alarms). Is there any way to delete these alarms from the Central server? Thanks
Alarm Removal from Central
Boss has asked me a question that quite frankly I never thought about - In opmanager Central - we have alarms going back to when the system was installed. He would like to get rid of the old alarms. I am thinking this is a repository to show history and the intent is that the old alarms are not meant to be cleared or else there would be a delete or clear button to do so. We have no problems clearing alarms on the probes but that doesn't fold up into central. Is this behavior what we should expect
Changed IP Address on Central Server and.....
After I changed the address on the central server the probes went RED yet I could still jump to them but even after rebooting the central and probe servers the probes still showed as red in the central server. In my example below the words CSO_Probe and Guest_probe turned red and main stayed normal because that probe is physically on the central server. What do I need to do to fix the probes after I change the address of the central server. Thanks in advance.
Email issue OPutils
Hi Support, I have installed OPutils as a trial version.As can be seen in attached, I have configured email alert. I have tested to see if the email triggered when the problem take place. It shows that the email has been sent but nothing come to my mail inbox.Can you please advise me as Email service is critical for us. Many thanks,
Migrate data from opmanager from windows to linux postgresql
We have windows 2008 64 bit server & we install Red Hat 6.5 What is best way to Migrate Data Base from windows to Linux & what step should be taken to restore. Data Base is PostSQL
Problem wtih Alarms
Hi, When i try to erase or delete any alerts, OP Manager do not let me delete any alert. Where is the problem?? I have the version 11100 Last updated.
OpManager Updates and Service Packs
I have a few questions about OpManager Service Packs: 1. Is there an estimated release date for 11.3? 2. When will you start posting the current version number for the APM Plugin on the APM Plugin Page? Even though the APM Standalone page says they are in sync. Also when will we get release notes on APM? http://www.manageengine.com/network-monitoring/apm-plugin.html#spack http://www.manageengine.com/products/applications_manager/service-packs.html 3. When will IPAM & SPM Plugin be upgraded
Interfaces not adding
Detection is fine but adding them doesn't appear to do anything. Just takes you right back to the same page. License Type : Free Edition Company Name : Zoho Corporation Installation ID : 582302000466481533 Build Number : 11100 Latest Version : 11200 [Details] Expires on : Never Maximum no of Devices : 10 Maximum no of Users : 1 Total Monitored Devices : 8 Total Monitored Interfaces : 0 Total Available Users : 1
availability %100 down
Hello, We saw same servers in the OpManager availability %100 down. It always %100 down. We didn't see this problem before. Do you have suggestions.
How to send syslog file to opmanager ?
Hi everyone ! I have a device is FotiGate 300A. At Fortigate 300A, I was enable syslog send to syslog server . So, I have question. How to opmanger can display syslog of device ? Thanks .
Raise Ticket in SDP based on Volumes With most Disk Usage
Hi, I'm using OpManager 11100. on the Home tab there is a widget "Volumes with most disk usage". I want to log a ticket with SDP when any server reaches a threshold set for that widget. How do I do this. Thanks, Tom
Folder Monitor with exclusions
Hello, OpManager Essential (v 11100) running on W2K12 server. We're planning to use Folder Monitor however I can't seem to find a way to exclude particular directory. Here is our setup: C:\Users\UserA\Directory1\ C:\Users\UserA\Directory2\ C:\Users\UserB\Directory1\ C:\Users\UserB\Directory2\ C:\Users\UserC\Directory1\ C:\Users\UserC\Directory2\ We would like to monitor Directory2 _only_ for all three users. Is it feasible? Thank you.
Workflow Doesn't start
We have created a Workflow to restart a Service of an application running on Windows server. The service need to be restart if an specific event occurse in the Windows event viewer. We created an event log rule in Opmanager to indentify the error and to create an alarm. This is working fine, we get an alarm if the error occurs. If the alarm occurse it need to trigger the workflow, which is not working. If We execute the Workflow manually, the Workflow works just fine. In the image below is the configured
Delta values not being graphed
Hello. I am working with OpManager version 10. I created a script monitor which polls counter64 values contained in an SNMP table (I can't use SNMP monitor due to device SNMP agent restrictions). Values are being polled and stored into database. I changed the saveabsolutes value to true for the monitor entry in the database but I am still viewing in the graph the counter value and not the delta value. Is there any other thing I need to modify in order to make delta values to be displayed? Thanks
Monitor a port of device when it was disconnect internet .
Hi everyone ! I have devices with ports connect internet. I was monitor performence and traffic ports of device. However, i wasn't monitor connect internet and alert when they were disconnect . So, i have question. How do i can monitor connect internet of ports and alert when they were disconnect internet ? Thanks .
Log off Windows user when logged in for too long
Greetings, Our IT department proposed the question whether it's possible to log off a user on a Windows XP workstation when it's been logged in for too long (over 10 hours). Is this possible with OpManager? Thanks in advance, Niko
Folder Monitor - file count condition question
I want to use the folder monitor/file count monitor to watch a folder on several remote servers. The folders should be empty if everything is okay, and if there is a problem on the server some files will be generated and the folder will no longer be empty. I've added a folder monitor with the folder path I want to keep an eye on, and the rule tests okay. I set the file count threshold to >=1 and rearm value to <=0. When the monitor checks the status it generates an alarm because it says "...does
Interface traffic monitor last month
we need to have traffic report on some interface monthly , so when i go to interface and click on the graph the graph traffic shown without any problem and when i select ( report option ) to select the date and time and select last week there is no problem too but then when i select last month or any custom date bigger than 7 days it shown fake graph or gust last 7 days graph !!! please help regards
PROBLEM!! Monitoring DELL Sonicwall 3300
Good morning. We want to monitoring an appliance DELL 3300, but when we add a new device in the admin console. OpManager doesn´t monotiring anything. We have already checked that the SNMP service in the appliance is running. We`ve though that probably the problem stay in the credentials, we don´t know if it`s necessary add anyone. Best regards.
95th Graphics
Hi. What does 95th that appears in the graphics? Regards,
URL Monitoring fails "Host Unavailable Bug in authorization handling"
Hello, We are using OpManager 11 and have been experiencing the following problem, we have setup servers and added url monitors on the servers to monitor the sites. The url monitors fails on different times on the servers, notifying us that they are down but when we go to the site it is up and running. We use windows authentication on these sites and we have set them up to not go through the proxy for our domain. This happens at random times and when it happens we see the following in the log
CMDB plugin if you already have ServiceDesk Plus
Hi, we have an installation of ServiceDesk Plus in production with more than 500 network assets (over 2000 counting their components) already populated into the CMDB. Each network device has been registered with the hostname as name of the asset. I was wondering if i can make this available in OpManager, perhaps with the new CMDB plugin, without upsetting the CMDB already present on SDP. It would be great if OpManager would link to the proper device on the CMDB based on the discovered name. Furthermore,
SSH, Credential Details and OpManager
How does OpManager execute SSH commands? I see under "Add Credential" that OpManager has a "Login Prompt". None of our systems use a login prompt (SSH), or Linux in general, normally an ssh connection passes the username with the connection (ssh dingbatca@linux_server) When testing this, I found this in my logs, on my Linux server. "Did not receive identification string from 192.168.1.192" This states to me that OpManager is not passing a username with the ssh connection. What am I doing wrong?
Alert Message for event LOG
Alert is showing message like this ID=5145 Source=Microsoft-Windows- Security-Auditing Type=4 Message=A network share object was checked to see whether client can be granted desired access.Subject: Security ID: S-1-5-21-2425007541-2752481645-3698813382-2 Account Name: owais.ahmad Account Domain: CDOCS Logon ID: 0x98488006Network Information: Object Type: File Source Address: 10.10.10.205 Source Port: 53106Share Information: Share Name: \*C$ Share Path:
Problems with auto scanning devices
Hi support Team, I need to ask you an information about my customer configuration. The auto-scan does not seem to work correctly, for example: same devices are counting more than once and a 48-port switch with 60 interfaces ... How can I solve this issue? Thanks and Regards, Ryo
Can a new ticket be created from an OpManager alarm on demand rather than automatically?
Hi, my client wants to be able to select an alarm and then choose to log a ticket in ServiceDesk. Whilst I know I can integrate Opmanager and Servicedesk and provide a notification profile tolog tickets automatically is there a way to just log a ticket on demand from OpManager? Thanks
WAN Links by Utilization Report Without Weekends and Only 8am-5pm
I love the WAN Links by Utilization report! However I would like to have the time window be 8am - 5pm and have the ability to exclude the weekend so that the calculations only consider data captured 8am - 5pm Monday through Friday. This way if I choose "Last 30 days" the average bandwidth utilization would only include the average of all data points over the last 30 days that are collected during our normal operation. Can anyone tell me if this is possible somehow?
Best way to get value of performance monitor via REST api?
In OpManager 11 what is the best way to get the last polled value of a single performance monitor? I'm looking at using getAssociatedMonitors call and parsing out what I need, i.e. the time and value. Is there a better way to do this? I did look at getGraphData but it wasn't clear to me what the x values represented. They look to be timestamps, but I'm not sure what offset they are using (it doesn't appear to be the epoch).
Excluding days from availability report
Hi, We are looking to have an availability report but with custom time per day ( i did this) and custom days per week "excluded weekends days" (i am not able to do it). Is there a way to do that in opmanager? We need to generate an availability report in monthly bases excluding the weekends, also a yearly report, and we might also exclude public holidays. we are running build 9410. Thanks
Create 3D Rack
Hi, How I can create a 3D rack to add a widget? Can not find function Add Widget Regards Rubén
OpManager on Ipad and Iphone
Hi, I dowload the application on your web-site for Iphone and Ipad. I did all the information which is below on the web-site But I have that kind of warn for Ipad "Login Failed Internal Server Error while processing this request" For the Iphone “This operation is blocked in Central Center Server” I tried to loging in with worng user name or password and I saw warning about it. And I can use Password Manager on Iphone there is no problem for the server sertting, I guess. What I miss? Thank you
Custom script to count connected wireless users
Hi, we are monitoring an Aerohive 330 and want to create a script that counts the current users connected to the device. This vendor doesn´t have this SNMP variable in their devices, but there is an OID that could give the IP list of connected clients. So we need help to build a script that polls this OID with snmp, and "count" the IPs in the response so we can get an integer number and have a graphic with the user count connected during the day. IS this possible creating a script monitor? We are
VBS Script (template) not Polling Remote Computer Correcty
I created a script to poll a server's uptime in minutes using VBS and WMI. The problem seems to be the strComputer = "." command it ends up polling the Opmanager server's uptime. If I put the device variable or the specific server name it throws errors errors like: Microsoft VBScript runtime error: Permission denied: 'GetObject' (on a w2003 machine) , (null): 0x80041003 (on W2008 or w2000). The command line is: cscript //nologo ${FileName}.vbs ${DeviceName} ${UserName} ${Password} svchost.exe
How to copy Tabs configuration among users and among servers?
Hi, If i customize OpManager (11200) tabs configuration for a user, I'd like to be able to also copy that configuration to other ones. Furthermore, since i have many probes, I'd like to have a way to have the same configuration on all probes for the same user. How can I accomplish that? Thank you
Need Help loading comtech CDM570L MIB
Hello, i have been trying to load a comtech CDM570L MIB in the OPmanager using the MIB Browser, but i keep getting error messages saying Error parsing MIB:fw10874-3e-new.mibException while loading MIB:IMPORTS failed: Could not find the file : C:/MANAGE~1/OPMANA~1/./mibs/ComtechEFData however when i use another MIB browser, it works fine. please help me.
Opmanager 10 Hardware Monitoring
Hi I see this video http://www.manageengine.com/network-monitoring/help/userguide/hardware_health_monitor.html about Hardware Health an Hardware Reporting new features in opmanager 10, but i can't see anyway to add Disk Array Monitor. Only this options it's show in all servers.
Is there a way to create a business view inside a business view?
Is there a way to create a business view inside a business view? I have multiple locations like 40. I want to have only 5 main business views then inside that, a business view specific location and inside that all my cisco equipment per location.
Edit printer category
Hello, I would like to know how I can edit the printer category to add some monitors ? I create 4 monitors in "Canon Printer" template. I want to create the same monitors in "HP-Printer" template but I can't do this because the name of the monitor is already use. And if I add a new monitor in "HP-Printer", I don't see my custom monitor that I created for "Canon Printer". Help me please :) Regards, Delatte K.
Juniper ssg520m
why there is not ssg520m in deice Type ?
Next Page