VM performance monitors
Hi In some virtual machines option VM performance monitors does not appear, what can be? Regards,
Widgets not working in new API
Hello I was wondering if anyone else is having problems with widgets in Version 11300. I have standard widgets that work when I go back to the original interface. But When I change it back to the new API there isnt any information or I just see %%. For example. If I add a widget for Notification Profiles Triggered in the last 24 hours nothing shows up in the new API. But If I change the theme and go back to the original the information shows.
Change SQL monitoring for all servers
Hello, How do I change the SQL monitors for all servers simulateously? I would expect a template for this, but cannot find any. For example: «active database connections» - remove monitor on all servers «Log files used percentage» - remove monitor on all servers «Excess total committed memory» - adjust threshold for all servers. Thank You.
Exchange 2010 Monitors
Hi All, I setup opmanager to monitor our exchange server, the following monitor Messages Received Per Second is reporting that we are consistently receiving 20000 messages per second, I have verified this is not the case with other programs (exmon and performance monitor). I wondered why OpManager is reporting such a figure and if there is perhaps a way to change it? FYI other exchange monitors seem accurate and in agreement with other utilities. thanks
OpManager deleteDevice API not working
Hi, I have been working with the OpManager REST API (http://help.opmanager.com/#rest_api), all the GET API's work as expected, however when I use as POST API, the deleteDevice API in particular, it doesn't seem to work. When I post the deleteDevice with the apiKey and the deviceName, I get the following response: {"result":{"message":"Device has been deleted successfully."}} However, the device doesn't actually get deleted. Could someone please advise on the procedure this API takes when deleting
Adding another drive monitor to a system already monitoring multiple drives?
I tried to add another drive monitor to the configuration for an existing Windows server that OpManager was already monitoring. I couldn't find any way to do this other than to remove all the existing monitors of the same type (in this case it was Partition Details of the Device (%)) and then re-add them again. This worked but I lost all the historical trending data for the previously existing monitors. Is there a better way to do this that will preserve the historical trending data that I somehow
Problem adding VMWare Host
By adding a VMWare Host, by Virtualization> Add VMWare Host tab, the message "Device already present in the system", but the host does not appear in the list of hosts vmware, and searching by name only appears a white screen with the message "Error". How should I proceed?
CPU Utilization
Hello All, I have added my DLink 3620 Switch as well as all required MIB file also. My problem is that OpManager didn't get Utilization data so I have changed device template and manually add custom CPU utilization monitor. Custom monitor get all data as its configuration but CPU utilization seems no data available. Please help me to short out.
Recently began to appear.
Recently began to appear. Unchanging thresholds for one device. Vary only in the templates. What to do? Where to look?
The Fluidic Interface have some major issues
Hi, Trying to use the new UI (Fluidic Interface) and found that under "home" my "business view" is overlapping the "voumes with most disk usage" widget. How to correct it? Also the map can't be shown with all it's details as you can see on the right side and bottom side. See here: https://www.dropbox.com/s/zb4bxomfropai31/Fluidic%20Interface%20issues.jpg thanks, Udi
Switches - port status differs between Trouble\Attention
I can understand quite how this works but we have a lot of switches we want to monitor. At the moment I have a Cisco Catalyst 2948G and a Cisco Catalyst 2950-48G. For some reason and it seems almost random, some ports come up as Trouble and some as Attention. When I acknowledge and clear the alarms the status goes to Clear and then once the refresh occurs the alert reappears.
Can't arrange the CCTV widget view the way I want it
Hi, Why I can't arrange the CCTV widget view the way I want it?
host esxi com SRM no opmanager
Added a host esxi in SRM (vmware site recovery manager) is protecting 3 machines. these machines 'protected', count as license? For example: host1 - 15 + 5 VMs protected VMs (host2) host2 - 15 + 5 VMs protected VMs (host1) What .. the number of licenses that will be used? ... 30 or 40? --------------------------------------------------------------------------------- Adicionei um host esxi em que o SRM (vmware site recovery manager) está protegendo 3 maquinas. estas maquinas 'protegidas', contam
MSSQL threshold best practice
Hi, I see that the MSSQL monitor came with some threshold already set. Where did you take those values? Is there some best practice or a list of expected values? Thanks.
ManageEngine OpManager Build 10200 released!
Dear All We are glad to announce the release of OpManager Build 10200. We take this opportunity to thank all our users for their feedback and the continued support. Following features are the highlights of this release: Widgets Added Sort Column option in Top N Monitored Values of a Performance Monitor widget Business View Summary widget now includes alarm count and list of devices in business view Option to choose a dashboard when creating new tab. Embed widget option to hide headers Open CCTV
Problem with MIB Parsing
Hi, I am trying to add MIBs for Fortinet products we are using. When i try to view one of the mib in OpManager i get an error. Error parsing MIB:FORTINET-FORTIGATE-MIB Exception while loading MIB:Could not parse the file C:/MANAGE~1/OPMANA~1/./mibs/FORTINET-FORTIGATE-MIB. The error occured at the line no: 6805 ,column: 5. 1. The keyword 'ACCESS' or 'MAX-ACCESS'may be missing. or 2. The keyword 'SEQUENCE OF' may be missing. or 3. The syntax with invalid subType construct. I think that the OpManager
OpUtils IPAM now supports IPv6
Dear All, We are pleased to announce the availability of IPv6 Address Management in OpUtils IPAM. You will now be able to manage both IPv4 and IPv6 addresses using OpUtils. Feature Highlights Automatic Discovery of IPv6 Addresses Add Global Prefix, Sites and Split Subnets with intuitive user interface Hierarchical Tree view of subnets for easy identification Scheduled Scanning at periodic intervals for an up-to-date information on the status Out-of-the-box and custom reporting for ready reference
Ops-manager page says "This page cannot be displayed"
Hello, I am facing a strange issue with OpManager. Some time it says""This page cannot be displayed". every time i have to reboot machine to make it work properly. Please let me know any work around to solve this issue.
Upgrade Free Version 11100
Is it possible, and what are the steps required to upgrade the free version of Opmanager?
Activeconnection value dose not match
Hi All, We added some F5 viprion 2400 devices into OPM in order to monitor CPU、Mem and Activeconnections. However, the CPU of F5 always stuck at 97% and I check the CPU OID matches the MIBs of F5 as given link, but I check the F5 CPU dashboard always display about 25%. In addition, the activeconnection value display a few hundred connections, even 0 from OPM snapshot. However, I use the same OID to get the value about 60K in OPM MIBbrowser, that's so weird. Please give your advice, thx
VMware Guest Snapshots
Does anyone know a way to monitor the number of snapshots per VM and alert if there are more than 1?
Get system uptime with WMI
Hi Is it possible to have the system up-time displayed in the default view (Device Tab) of a server that is monitored by Opmanager? This would also allow me to report on the up-times of all servers I manage using Opmanager. Kind regards Eugene
Scheduling of Automated back-up of OpManager.
Dear OpManager developers team, There should be an option under ADMIN TAB of OpManager for "Back-up Scheduling" regarding automated data back-up like we have in ManageEngine Service Desk Plus. There should also be an option for placing the backed up data to a network mapped drive for disaster recovery in case of system burn / hard disk total failure. Engr. Syed Naushad Shah
What is the big benefit from using Agents
dear sir How are you? I would like to ask about Monitoring Servers using Agents under Monitoring in admin page, What information i will get from using this agents? And what if i plan to not using it and just use SNMP or WMI credential, do i loss many data from servers? Is there any traffic or loading on CPU & RAM when using Agents in servers? Can i monitoring my servers only using Agents without using WMI & SNMP credential ? thanks
Port Mapper
Hi Can I put a threshold limit for Port on a switch . if I am using port mapper . If one of the switch crosses the threshold can it generate a notification .
Cannot perform first login OpManager 11.2
Hi: I just downloaded OpManager 11.2 and installed it under Ubuntu 14.04 Desktop. I didn't install any other components. The ping requirement were met and it appears as though XFree86 is installed. The installation seems to have gone well but I cannot login through a web browser. It is stuck at the License Activation Details page. The browser is stuck in a waiting, loading from... loop. If I view the page source there is this snippet: Your current license allows only <B> 1 </B> users but you
Connections Port
Hi Is there any way to monitor the total number of connections on a port? Regards,
Issue after upgrade OPManager build 11300
Hello, I upgraded my OPManager server with the latest build then I got the following issue: All WMI performance monitors stopped to work. I checked domain account and password, ok I switched to SNMP performance monitors, it is working. I removed WMI monitors and readded them with no good results, not working. I reapplied via templates but no way, it doesn't work. Can you help me to resolve this issue? Many thanks Philippe
OpUtils Addin for OpManager Does Not Use Proper Community Name When Scanning
I have OpUtils addin as part of my OpManager. I'm at v11300 for OpManager, and IPAM andSPM Plugin v6. I have OpManger monitoring switches with no problem. OpUtils displays switch information and appears to operate. However, If I scan the switch, it fails and I receive "Switch is down - No response to SNMP queries". I can ping the switch. When I attempt a SNMP Ping, it fails. However, if I re-enter the community name to on the SNMP Ping screen, it successfully pings. It appears that OpUtils is not
Users
Hi How can I verify the changes made by users in opmanager? Regards,
how to write a custom windows script for OpManager
Where can I find examples of how to write custom Windows scripts and use them inside OPManager ? OPManager version = 11 Thanks,
How to monitor Active Connection Count of device run Linux server.
Hi everyone ! I used opManager was monitor devices in company .I has device run Linux server with service nginx. I want to monitor Active Connection Count of device run Linux server this . So, Can you help me . Thanks :)
VMWare Server Stats not showing after roll back to 10.2
We recently rolled back to 10.2 after an issue upgrading to 11.2 . The last outstanding issue I am unable to resolve is our VMWare servers are no longer statistical data for anything. It does show availability and does show all Inventory details. Also when trying to rediscover the device it display "Error!" Is there a fix for this? Please let me know what additional information you need. VMWare versions 5.1.0 and 5.5
"Hardware health" monitoring is unreliable
I have a Cisco 2821 router, which is reporting a fan failure on Fan #1. OpManager is showing all fans as healthy. The router is reporting this: 149397: Jun 6 09:38:01.041 EDT: %ENVMON-3-FAN_FAILED: Fan 1 not rotating Obviously I can't trust OpManager to report hardware health and I'm going to need to manually check all my equipment now. This is the page for that router:
Device not monitored
Hi all, I have just recently installed OpManager 11 (previosuly I had a working OpManager v9, but I did a complete new install without migration). I want to monitor a remote AIX computer over which I have little control. I can use SSH to connect the that server, so I configured OpManager to use CLI monitoring. As soon as I start OpManager, it seems to correctly fetch the values for disk utilization, memory utilization and cpu utilization, but shortly after I get a red warning in the summary page
Problem URL monitor
Hi. We're receiving alarms indicating that the URL is down because the host is unreachable. the error i receive is: 404: The server has not found anything matching the Request-URI. : However, when entering the URL in a browser, i'm able to connect to the site and i can even click on the URL link in OpManager and open the site. What is the cause of this error? Any solution?
Connection loss causes device to be "unmanaged" status.
I have an issue where when a device loses connection, it goes into "unmanaged" state. But when connection is restored, I have to manually go to the devices's page and select "Manage" again. Well this is kind of a headache when monitoring devices spread out across the country over some very unreliable connections ranging from DSL to satellite. We expect these devices to have some connectivity downtime, so monitoring the amount of time is what is more critical. While the above problem is a pain, the
Problem running powershell commands in script monitor in OM 11200
I would like to schedule a Test-MAPIConnectivity script on one of our Exchange servers but am having problems setting it up as a script monitoring template. I have found the script body that I think will work but when testing it I get the following: "The term 'Test-MapiConnectivity' is not recognized as the name of a cmdlet, fun ction, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again." Is there a way of installing
Monitoring additional SQL instances
I have an issue when I create a new SQL instance, on a server that already has one (or more) installed. We have a rule which associates MSSQL monitors when it finds sqlservr.exe running. This works, and we get the MSSQL Dashboard View and MSSQL monitors. The problem comes when we install another instance later - no matter how many times we re-run the rule, it will not associate the new instance with the monitors. However if we delete the monitoring for all existing SQL instances, then run the rule,
connected clients in pico station M2
Hi every body i cant see connected clients to my pico station m2, I have installed opmanager recently and I have no idea what should I do, can some one guide me?
Next Page