How to Increase number of servers in "Health Report" ?
Hello, I'm using Opmanager to monitor all devices/servers. And I have to export health report weekly. But the health report shows only 10 devices/servers as pic. How can I increase more than 10? Thank you.
Create network topology map
I am trying to create a diagram of all the switches and routers in my network.Is it possible to create a Network Topology map using OpManager? If so, how can this be accomplished?
OPmanager Downtime Scheduler
I've upgraded to 12200 from version 11. I'm struggling to find the same features in v11 for example where is the downtime scheduler etc. There doesn't seem to be an admin tab like the v11.
Discover button broken for IP Mapping ESX server in Vcenter?
Ok, So when I am in the vCenter properties, I see that many of my ESX servers (all the same version) are monitoring, while others are not. When I click the green arrow to start monitoring, I get the IP Mapping screen. This has all of the available credentials except vmware ones, however I have a CLI set up for the hosts, so I select that. What is odd though is that the discover button does not work. Everything else on the page does something, but that button is unresponsive to anything. What am I
Page Layout does not persist between sessions
The "Page Layout / NOC Screen Alignment" feature doesn't seem to persist between User sessions. I have to reset the alignment to "Wide" each time I close and open the browser window.
Show all supressed devices
Hi, I was wondering if it is possible to list all the devices with "forever" suppressed alarms in OPmanager. Some report or DB query? Regards, Ivica
Stop Importing VM's into OpManager
I have 12.2, and set up my Virtual Center for VmWare. (not hosts). There are quite a few machines on there that I do not want in OpManager (VDI, workstations, etc) that OpManger keeps importing into the configuration and violating the license. How do I make it stop importing all these unnecessary machines? Thanks! -Chris
Internal Communication Ports
I see there is a NMSSocketPort and NMS_FE_SecondaryPort . I'd like to understand what sort of communications take place, and is there any way I can capture this network traffic?
Opmanager 12.2 Database Repair
Can someone tell me how to run a PGSQL repair in version 12.2 There doesnt seem to be a repairdb.bat file anymore. Thanks Sys Admin University Hospitals Bristol NHS Foundation Trust
Error when load MIBs file
When i upload MIBs file into Opmanager is success but when i load MIBs file there is error. Please tell me why and how to load file MIBs. P/S: I send you error image and MIBs file Thanks.
OpManager Probe server requirements
Hi all, What are the HW requirements for a W2012 probe server (cpu, mem, etc.)? Kind Regards Roger
Sending SMS alert messages
Hello, We have implemented Opmanager around a month ago, everything is working fantastic and the setup for email alert is simple! I also want to setup alerts by SMS, i registered a clickatell account and put in the user and API settings in Opmanager. However when I make a notification rule and i click on test, Opmanager freezes for about a minute but nothing happens and no SMS messages are sent. Can someone tell me what i am doing wrong? We are running the latest version of Opmanager
opmanager - device icmp monitoring
Hello, Can you tell me how frequently is Opmanager ver 12200 doing icmp polls to network device and how many icmp checks is done in each poll ? How are calculated reports/statistics of Devices by Response time ? min,max,avg of what checks ? How Opmanager gets the value "Response Time" in the monitoring device screen ? Is it via snmp ? if yes which OID ? thanks in advance
Layer 2 Discovery cannot run
Hi Picuture below shown it cant be click anywhere in discover button anyone?
Custom report
Hi, I want to create a report from a bussiness view's servers. I need the perform structure, like CPU utilization, Memory, etc. for each server in the bussiness view on one month period. Is it possible to get them in one report? Or I have to schedule the report daily and copy the data to a personal excel? I see in one topic ( https://forums.manageengine.com/topic/custom-reports-1-8-2011 ) that they use a SQL query. How can use this query? I need to access into the server or can I do directly from
Custom Field - Send message
Hello, How can I configure the custom fields with the message alerts? I create some custom fields, and I put the information in one server, for example: The custom fields are activated: But when I receive a message alert, the custom fields doesn't show the values. How can I configure correctly? Thanks, Jordi.
Enabling SSL on OpMan v12
Hey there I've tried to look for How-To docs online but can only find old ones - is there an updated doc on how to enable SSL on OpMan and AppMan probes? Thanks in advance, Mat
cisco device monitoring snmp/icmp
Hello, Can you explain how opmanager build number 12200 gets following statistics or reports ? in the widget "Device by Response time" how frequently is doing checks and how many in each poll ? is it via icmp or snmp ? is the min/max/avg value calculated based on the widget time range ? Dials in the monitoring screen of cisco device How gets "Response Time" value ? Is it via snmp ? which OID ? Does it depends on the device polling interval ? Does it represents
Error when load file MIBs Juniper
Dear Support, I upload MIBs file of juniper success but when i load file it there is error bellow: Error parsing MIB:juniper-mibs-15.1X49-D70.3.zipException while loading MIB:Not a valid MIB file : E:/OpManagerProbe/./mibs/juniper-mibs-15.1X49-D70.3.zip Please Support me how to load MIBs file. P/S: I send you MIBs file and image error. Thanks & Regards.
How to upgrade to the latest version
We have Opmanager enterprise, the version is 9101, this version use the Mysql server. How to upgrade to the lastest verion? Thanks! Caijun.Luo
SQL Query question
Hello, I looking for information about maintenance problems, and I see that I cant execute some queries for solution this. When a schedule maintenance finish, some devices don't change to clear state. Well, the queries are: delete from ElementsOnMaintenance; delete from MaintenanceStart; What are this queries? It delete all the schedules maintenances? Thanks, Jordi
OpManager Internal Communication Ports
What are the internal communication ports used for in OpManager? There is a NMS_FE_SecondaryPort and NMSSocketPort. I'd like to understand what sort of communications take place, and is it possible for me to capture the traffic that travels across these ports?
Server Probe requirements
Hi all, please could someone explain how to configure a server Probe for OpManager in a few steps? What are the HW requirements for a W2012 server (cpu, mem, etc.)? Kind Regards Roger
how to add a new category in OP 11
is it possible to add more custom categories within the device templates ? thx Bauke
opmanager v11.6,can't find ESXi 6
Hello all I tested OpManager v11600, I tried to use OPmanager to monitor vCenter, vmware credentials can be found through the virtual machine, but can't find ESXi host, manually add ESXi can't see the performance details, please help me Thank you! vCenter version 6.0.0 ESXi version 6.0.0
SSH drop out of nowhere
Good day I received notification from our info security team that there was an attempted SSH drop from one of our OpManager probe servers to an external IP address. It hasn't happened since which is a cause for alarm (if it happened more than once, we would imagine it was a scheduled job or something). Can you please advise what could be initiating this connection, i.e. what feature I need to look at in OpManager that could send these SSH drops? Thanks in advance. Regards, Mat
Dashboards in version 12.1
We have recently upgraded to 12.1 and I am trying to replicate the Dashboards and CCTV views I had in the older version. How do I resize and position the widgets in the new version? I can't seem to get the layout I need as the widgets just put themselves where they want and I am unable to re-size and move them. Also the Google map widget is very small and i need to be able to re-size that so that I can get all our remote sites on the map.
OpManager and Juniper EX4200
Hi All, I'm having an issue with the Junipers we have, I've just updated to OpManager 11.3 and added our Juniper EX4200 to OpManger, we are getting the following alert "Hardware Sensor Name : Routing Engine 1. Category : temperature. Current State : standby(7) - The sensor is operating under conditions that are non-critical." this is happening only to these devices, our Juniper SRX and the HP ProCurves are fine, I have checked the temperature on the switches and they are under the threshold that
Custom Monitor graph to Dashboard
Hi all, I wonder is it possible to add custom monitor graph to dashboard. Tried to do that through Inventory -> Tick the server -> Generate Reports, however I cannot see the custom monitor in the list. I can see the graph on the Custom monitor page the problem is to turn it into Widget on the dashboard. Kind regards, Pavel
OpManager 11.6 Can't discovery ESXI HOST
HI, all Vcenter cannot discovery VMware ESXi server in Opmanager 11.6 , I've added vCenter for monitoring via VMware protocol ,But all virtual machines is discovery successfully . However all the Host ESXi Server did not discovery, it not showed. Please advice the solution for this,thanks! (ESXI version 6.0.0) Alex
OpManager 12 Process Monitors
Is there a way for me to create a template that will add all running processes into the process monitor? We have been tasked with adding all desktops into OpManager and the main thing everyone wants to see is all the running processes and the resources they are using. I know I can add a desktop...go to process monitors...click associate...and select all. Is there a way to make this a template where all running processes are automatically added?
OpManager Probes Polls Per Second
Is there an optimum or best practice for the polls per second/load that is put on a probe before we add another probe into the environment? Is there a specific number we should aim for or not go over.
Graphing a Script Monitor
Hi, I've got the following script monitor set up for a linux server which is working fine, however I'd like to graph the output over time so I can see trend the number of connections that are seen by the monitor, I just can't seem to nail it, any chance anyone can assist please? Thanks, main () { CONNS=`netstat -an | grep 3000 | wc -l` echo "Message: Connections calculated successfully." echo "Data:" echo -e "$CONNS" exit 0 } main $*
Mount Poing OPM
Hello all, Is there any possibility of monitoring the mount points through OP? I see that with the AP plugin I can monitor them, but is there any way to link it to the OP so that through it can show them? I have also seen that adding the WMI object can be monitored, but I can not find where the query can be made to add a custom monitor, I only have the option to add predefined monitors. Thanks, best regards. Jordi
IP address manager - Change IP address status manually (reserved)
Dear Experts, I would like to ask you in connection with the problem as you can see in my subject. I use a couple of IP addresses as NAT-ed IP address. These addresses are NAT-ed in my firewall, so they look like Unused addreses from my IPAM point of view. I would like to mark these addresses in IPAM as "Reserved IP addres" manually. There was a feature in earlier version of IPAM, but I can not see the possibility in the actual version (12.00) Do you have any idea about it? Thanks: Attila Odrobina
Unmanage interfaces is not working anymore
Hi, I used to unmanage interfaces before and it worked. Currently I have 2958 interfaces in unmanaged state. I need to add ~1500 to these. However, when I mark the interfaces I want to unmanage and click "unmanage" - nothing changes. I have a nice note on the top: "Interface unmanaged successfully" but there's no result. Server was rebooted. Is there solution to it? Kind regards, Pavel
Apply template with script condition
Hello all, I'm new in OPM and I testing in a demo product. I create a linux script whose reply me an integer like 1 or 0 if one service exists (if exists the control file). There are any possibilities to control the result of this script and, if for example, the result is 1, apply the threshold template X, and if the result is 0, apply the threshold template Y? Thanks, Jordi
Opmanager Servicedesk integration
Hello Everyone I can not integrate Opmanager 11600 with Servicedesk Plus 9204 No Firewall is setup Username and password is valid .I can not in as local auth to SD I have also tried domain auth but it also do not work technical key is generated in SD on account administrator During configuration I am getting error Servicedesk is not running I can open servicedesk web page port 80 from opmanager server No sure what can be wrong Can anyone help me with this issue Thanks
Op Manager monitoring issue.
Op manager has identified a vm that is reporting down. but its up. i have firewall rules to allow Op manager to vm. Op manager does not issue a alert reporting it down but it does show it down on its webpage. also it lists trouble on both network interfaces below. does any one know what this means and a possible resolution to it? this just started happening recently and previously never had this issue.
Spelling Mistakes
Just been looking at the Compliance Status of one of our Cisco switches and noticed some spelling errors for the CiscoIOSPolicy Might be worth correcting for the next release?
Next Page