Componentes COM con OP Manager
Hola! Tengo una aplicación muy inestable y tengo indicios que suponen que la razón de dicho comportamiento se debe a los componentes COM que ésta utiliza. Con OP Manager podría monitorear los componentes COM de esta aplicación? Quisiera saber si es posible configurar alertas para que se me notifique apenas se llegue a un umbral previamente establecido, de modo que pueda tomar alguna acción. De antemano, gracias por su ayuda. Saludos Wilfredo
vmware vcenter 6.5 appliance with seperate SSO server
I have a new vcenter 6.5 appliance with a separate SSO server. I cannot get opmanager to connect and see any of the vm's with the data-center. i have tried a domain user with full privileges, i have tried the administrator@local.local account... I've tried everything i can think of. Please advise. Thanks in advance... MT
Is it possible to make exceptions for Critical errors in Windows Event Logs?
Hello, I have turned on Event Log rules for Application and System logs on Windows Servers to make notifications. Is it possible to make exceptions for certain event log IDs?
Permissions for OpMan Account
Good afternoon We have OpManager 12200 installed and want to monitor our Domain Controllers. Can you please tell me what permissions are required by the account doing the monitoring in order to pull the data. Do you have a permissions matrix anywhere? Many thanks
Ignoring specific event log errors
Hello, When monitoring the event log for a particular server, is it possible to check the box that monitors for all errors yet manually exclude certain ones? For instance, every time I RDP into a server, I get an error in the system log about a printer driver not being installed. The error itself is harmless, but I get an e-mail every time it happens because it shows up as an error. Any way to manually exclude this particular event?
customized report query
Hi, i would like to create a customize report containing devices temperature threshold violation for the past weeks, and this cannot be provided by the report from "any performance monitor" report, as it is only giving the max/min/ave from the certain period selected. my aim, is to generate a daily report of the threshold violation for temperature alone so we could know which times it is usually violated.
Can not start up Opmanager
Dear all OpManager Expertise, I 've got a problem that the OPManager can not be startup. The error message in wrapper.log is following: STATUS | wrapper | 2017/07/21 09:09:01 | Launching a JVM... INFO | jvm 1 | 2017/07/21 09:09:01 | Error occurred during initialization of VM INFO | jvm 1 | 2017/07/21 09:09:01 | Could not reserve enough space for object heap INFO | jvm 1 | 2017/07/21 09:09:01 | Could not create the Java virtual machine. ERROR | wrapper | 2017/07/21 09:09:01 | JVM
Hardware Monitoring
I have read about Hardware Monitoring in OpManager. But, couldn't find any relevant documents. Can someone point me to the link or guide?
how get json data for use on another site
i made a custom report and i want to know if i can get that info on json use some kind of API
Netapp FAS 2520
Hi, we got a new FAS 2520 last week. After configuring and testing SNMP-Credentials, I was able to successfully add the machine to Opmanager. Everything looks fine so far. One question though: The root volume of the aggregate is at "Volume used for root_vol is 90%, threshold is at 30%". 90% is normal for the root volume, but not for our other volumes, so: Is it possible to set different thresholds for different volumes? If not, will you consider this as a feature request? TIA G. Weiss
OPM GUI Tab Question
Hi All, My central-probe opm version is v11600, as we know, the default GUI display with EventLog Analytics(ELA) tab afte entering username and password. When clicking the ELA tab, there is a ELA plugin advertisement GUI. And then recently we are about to purchase to ELA enterprise version. Here are some question: 1、As for now, ELA entprise version can't integrate OPM enterpise version, is it right? If can, how to integrate? 2、After deploying the ELA enterprise version, we
use data from custom report
i want to know if i can use a data from custom repor on another site
OpManager Window Scaling Issue
I'm currently doing a demo of OpManager and I'm running into a minor problem / annoyance. Whenever the window is maximized, it will not scale to the width of the browser. However, if I keep the browser un-maximized, I can stretch it to the width of my screen and it will scale properly. It is only when I maximize the window that it snaps into what appears to be a fixed width. Here are some screenshots that might explain the issue better. Window un-maximized and stretched to width of screen: Window
usb interface monitoring
Can i monitoring the usb interface with this application ?
Restore database OpManager 11500
Hi, I am configuring a new server with OpManager and when trying to restore the old server database I have the following problem: D:\ManageEngine\OpManager\bin\backup>RestoreDB.bat "D:\ManageEngine\OpManager\backup\Backup_Pgsql_Jul13_141049_11500.zip" [07-13-2017]|[17:59:40:762]|[FINE] : ************** Restore operation started ********************** [07-13-2017]|[17:59:40:762]|[FINE] : Restore started on 07-13-2017 at 17:59:40:762 [07-13-2017]|[17:59:40:762]|[INFO] : Extracting property
How to get bandwidth from cisco device with Opman 12200
Hi! I'd like to get bandwidth from cisco device using SNMP. I have created new bulk monitor the following syntax in device template. monitor name: TotalBandwidthUtilization SNMP OID: (.1.3.6.1.2.1.2.2.1.10+.1.3.6.1.2.1.2.2.1.16)*8*100/(.1.3.6.1.2.1.2.2.1.5*$DELTA_TIME) Interval: 15 Units: Percentage But no data display Thanks.
https url monitoring problem
Dear Support, I have monitored many http url with Opmanager without problem. but how is about https? actually i have serous problem with almost all https url and Recently I found that OPM show fully downtime. but they was actually up. I also check using public site uptime to find out it is really up or not from various outside server. The site does not need any login information or sth else. just when you enter it in your browser it opens well. anyway It is not just for one https but almost each
Ethernet Interface Template Changes to not overwriting existing interface settings
Hi All, We have an issue where the changes we make to the Ethernet Interface template are not correctly applying to existing interfaces. We are taking the following steps as per the attached screenshots. However, after disabling monitoring of the discard rates, and changing the threshold of the utilization to be able 90%, we are still getting e-mail alerts when the threshold on interfaces goes over the default level of 30%, and still getting e-mails about discard rates, which we do not want to get.
SNMP is matched but test credential always failed
Good Afternoon ManageEngine, Since many days ago, I am attempting to check the connection between my servers and OpManager but the connection always failed. I checked my snmp community, my ssh credentials also firewalls and IPtables are disabled on the server. but still have the same result. I used mibbrowser tools and see that the problem looks like connections timed out. Nevertheless both servers can receive and sent ICMP packets. Can anyone help me, how do I resolve it ? Best Regards, Miguel Egel.
How to download Probe OpManager V11
Hi, I need to install the OpManager Probe V11 (build 11600) in a Linux server. But I can't find the bin file to download. Can you help-me? regards Roger
SNMP matches but test credentials failed - Request Timed Out
Good Afternnon Team ManageEngine, Since many days ago, I am attempting to establish a communication between my linux servers and OpManager, I checked my snmp community, both device can send and receive ICMP packet's(Ping) but the result of test credentials is failed. I tried with mib browser tools testing the snmp connections and the result was request timed out. for the IP servers. Can anyone help me to resolve it ? Best Regards, Miguel Egel.
how to monitoring VPN tunnel ?
I need monitoring vpn tunnel How to do it? I discovered host in my WatchGuard X505 5 series but it is not in Vendor, Type for my device There are 2 firewalls between our offices connect by VPN tunnel (WatchGuard X505 5 series). Ive find MIBs Standard MIBs are definitions of network and hardware events used by many different devices. Your Firebox or XTM device supports these eight standard MIBs: IP-MIB IF-MIB TCP-MIB UDP-MIB SNMPv2-MIB SNMPv2-SMI RFC1213-MIB RFC1155 SMI-MIB These MIBs include information
DHCP Server option missing OpUtils on OpManager version build 12200
Hi, Someone please explain where is the DHCP Server monitoring section in the OpUtils on OpManager version build 12200. Also how to configure the same. Thanks, Ramesh
How to trust a Discovered Connection in 12.2
In the previous versions, it was easy to do. In 12.2, I don't find a means to edit the status of discovered connections, e.g. Trust, Guest, etc. It may be easy and right in front of my nose, but... Thanks, Kevin
Documentation
Why does the link to the documentation bring up OpUtils version 7 documentation? The Online HTML is version 7, the PDF file is empty, and the zip download never actually starts the download process.
Adding Aruba Controller
How to add Aruba Controller 7005 and access points in OPManager. Tried many templates and custom OID still I can't get the DATA from my controller. Any help would me highly appreciated.
Duplicate Interfaces
Build Number 12100 OpManager is showing duplicate interfaces on devices. Specifically I'm working on Cisco CAT 4500X switches. I have seen up to 7 duplicates of each interface. I have tried rediscovering the devices, and also deleted the devices and re-added them with no change. Any thoughts? I would rather not have to delete 1000+ interfaces manually every time each switch is rediscovered.
OpUtils 12.2 IP address notes?
We migrated from Oputils 8 to 12, and within version 8 we added notes and info to certain IP address like external IPs and now within version 12 after migration we cannot see or find these notes? Any idea where these are within the new version?
Switching from 11,6 V to 12,2 V OPM
Hey, We want to switch from 11,6 v 64x to 12,2 64x. So reason i am writing is that i want to ask, do we need to know anything special to make this transition correct ? Regards, Adrian
Incorrect CPU Usage.
Hi, I have a server in opmanager (11600) Which is reporting 100% CPU all the time, it's a backup DC and literally does nothing. Have monitored it though task manager and it just ticks over. Have tried doing a rediscover on the server, but no joy. Is there anything else I can try? Hope you can help.
Ethernet Interface Template not updating existing switch ports
Hi There, We have an issue where the changes we make to the Ethernet Interface template are not correctly applying to existing interfaces. We are taking the steps as listed below, and choosing to apply the settings to existing interfaces. We have tried to do it global, and also to the individual interfaces in question. However, after disabling monitoring of the discard rates, and changing the threshold of the utilization to be able 90%, we are still getting e-mail alerts when the threshold on interfaces
[Question] Cisco Switch Stack monitoring - no alerts for single failed switch in a stack
Hello, most of our switches in our environment are Cisco stackable switches. And because of their inherent redundancy, if a single switch in the stack fails, OpManager never alerts us when this happens. The switch stack is still operational / pingable as far as OpManager is concerned. Is it possible to monitor and send alerts when a switch in a stack goes down?
How to monitor CSR in OPM V12200
Hi Team, We recently purchased Cisco CSR 1000V firewall in our environment. We need to configured it in OPM to monitor live traffic on interface or usage.
Getting a ton of these errors for recently added server to OpManager: "No Trap Parser defined for received trap"
I recently added a bunch of servers to OpManager 12.2 and this is first time seeing these errors. This one server has a ton of these showing up on the daily event reports. Any idea's on what's causing this? We set up the server the same as we have done hundreds of times. We use snmp community string. It's a brand new build so I'm not sure what would cause this. No Trap Parser defined for received trap: TrapOid : .1.3.6.1.4.1.1815.2.6.0.4.2 Variable Bindings: sysUpTime.0: 1 day, 18 hours, 20 minutes,
Data Not sysnced with interface
Hello Team, I have been configured custom monitors to monitor firewall interfaces. But that data was unable to load through it. when i check for Interface details there is no data error occurred. How can i troubleshoot same. Kindly suggest to resolved this.
OpManager showing Windows NT Service down but no Monitor is set up for the service
I have an alert for a Windows NT Service down on one of my servers being monitored by OpManager however the service no longer exists. I went to the Server and chose the monitors option however there were no violated monitors showing for services and the service that went down was not listed under the Windows Service monitors. Should I be looking somewhere else? Any assistance would be appreciated. I am currently running OpManager v12.2 that was an in place upgrade from v11.
Ubiquiti
hello how add powerbeam m5 and nano station m5 to op manager? and how monitor it?
Publishin g IPAM and SPM are not working well - missing index.html files in the subfolders
the publishing functionality is not working because there is no "index.html" file in each subdirectory created when publishing, and the only way to access the reports is going to each folder in the installation directory /IPAMpublish/ and double-clicking the htm file created (as intance: 2017_07_10_17_32_58.html) Ihave installed the last consolided servicepack (June 20th) but this doesn`t resolve th IPAM asn SPM publish options
How to stop a scan process?
Hi, When a FW was added to monitoring, Oputils added automatically de subnets configured in the routing tables of the firewall. Some networks have mask 255.255.0.0 and when de scheduled task to scan the IP is taking about four-five hours to scan each subnet, so the servers' disk is writting all day and the OPM server is become very slow. How can stop the scan process without reseting the Opmanager service ? IN addition, the publishing functionality is not working because there is no "index.html"
Virtual machine is connected Alarm
Hello, we're using OpManager 11600 and I have had this issue for some time now. It just recently became a real pain. We have a number of Virtual Machines which are regularly powered off and on for maintenance and we have noticed that when Virtual Machines are powered off or migrated we receive several alarms for each device. These alarms do not seem to reflect the settings which we have configured. New UI > Settings > Monitors > VMWare Events VmConnectedEvent - Severity set to Clear VmMigratedEvent -
Next Page