Is it time to upgrade or replace?
Last year we tested out the latest version of Opmanager at the time. It had too many issue for us to make the upgrade. At the time we decided to look into alternatives. Now we have the funds and the decision needs to be made for us to either upgrade or replace. I would like to know if some of the issues we had have been fixed? 1) Can non-snmp enabled devices be added? We could not get them to add when we tested. We have a lot of devices (100+) we only want to monitor with pings. They do not support
NCM interface monitoring
Hello, I was wondering if with Network Configuration Manger it was possible to monitor the interface of every discovered divice or if it was only possible on OpManger. Kind regards
OP manager 11.5 widgets and correct oid for centos servers
I manage several centos servers, apparently the widgets display a different value it goes to show they might be using a different oid for example memory utilization is different on a linux environment thus it will show 99% utilizationn thouhg we all know that linux machines handle memory in a different maner Plus the built in snmp monitors are wrong, we had to create custom moniotrs for it to work is there any way we can correct this
OpManager to enable encrypted connections with MSSQL Database
We have recently enabled SSL encryption for connections on our SQL Cluster. However, in doing so it has broken our connections for OpManager. Is there any way to set OpManager to enable encrypted connections on it as well?
Couple quesions about Dashboard widgets and OpManager 12.3.024
Good afternoon. We are setting up a NOC dashboard for a big screen and i am populating it with lots of statistics concerning the state of servers, however i have a couple questions. 1. We have multiple sites, with a Datacentre in each and want to create a widget that pulls the temperature from each site and displays it. Currently i have a widget for each site and was wondering if there is way to pull data from multiple machines into one widget? The only one i can find is Min/max/Average widget which
Delete a subnet with size 1073741822
Hi, We have an issue with one of the subnet. One subnet is showing size 1073741822. Not sure where did it appear from as no switches/routers added in OpManager got this subnet defined. We tried deleting it, but the operation goes forever. Any idea how we can delete it. Thank you,
NCM
Hello everybody i use ncm but i want the backup the three switch cisco, when i execute shows the following
custom reports opmanager
Hello, How can i get a custom report with top 10 assets with more alerts, and the top 10 alerts? Thanks
[Free Seminar in Chicago, LA & Toronto] Explore ITOM solutions. Experience smooth IT.
Hello everybody, We are gearing up to meet you at for an action-packed day of new learnings and product demos at our free IT Operations Management seminar, and we'd like you to come along. We have interesting sessions on network, server, and applications management that are aimed to help you meet your business demands. You can participate in the interactive demos of our solutions and learn how to get the most out of your IT. You can connect with our product experts and peers from your city, make
unable to create a Log Files Monitoring template
Hello nice people, I would like to monitor the log fie of a database server and also like to get an alarm when the log files are full. After getting the alarm, the OpManager will automatic delete the old log files. But I am actually stuck in the middle of this process. I have installed the agent on the database server and successfully mapped the agent into the device. In the next step, it is recommended to create a file monitoring template and enter the file path. Each time I enter all the info to
Monitoring ENVIROMUX E-5D
Hi Folks, We need adding to Opmanager monitorig the follow devices: Vendor: ENVIROMUX E-5D Type: Medium Enterprise Environment Monitoring System Link: http://www.networktechinc.com/environment-monitor-5d.html#tab-6 Now we had have problem with load the MIB and create custom template monitor. Please, if you can help us. contact me. I look forward to you comments.
Free OpManager Training: Your guide to better network monitoring
Hey everyone, Our free OpManager training is back with a bang! Get ready to amp your network skills and boost your productivity with our free training on OpManager. Join forces with your peers and attack network management head-on with our training. Register Now This five-part training series covers the nuances of every OpManager module: Part 1: Network discovery and classification Part 2: Server performance monitoring Part 3: Network performance monitoring Part 4: Network fault management and IT
Interface Logs
Hi, I'm currently running OpManager 11, and am looking for a way to view what port a device was on, on a switch 6 weeks ago. I have the MAC Address, IP and Name of the device, but I need to find out what switch port it was on. Is there any way to do this? Thanks Chuck
Register
How do I register for OpManager
Installing a new OpManager
I'm going to ask you guys for help on one thing. The opmanager (11600) that we used was installed on a new server. when installing to the new server, select PostgreSQL as its database and complete the installation. We can not add the backup file we got from the old server to our new server. Why is this problem causing?
No Data Available
Hi after i backup data and restored to a new opmanager server my switches interface's graphs have nothing to report ad show me "No Data" instead of this in,performance report also show me No data available in this period when i change the period to data before my backup everything is ok but after that is nothing also i try to add a new device but the new device also interface graphs has no data what ca i do for this problem?
OPM12200 - User dont show inventory, business views and monitor's information
Hi, I have an issue with OPM build version 12200, an user with access control like Operator do not show the information although it has the scope to selected business views. In the inventory do not appear any monitor and with the admin user I have 24 devices. If I see the business views and it have assocated monitors in everyone If I see one of the business view I can see the map view with the monitors. But if I see one of these monitors send the next. Thanks & Regards!
OPM AD authentication stopped working after password change
Hi, Our company's OpManager uses AD authentication and one of our OPM users changed his AD password recently. After password change he can no longer login to OPM with his AD credentials (tested new and old passwords). What could have caused this? User who changed password said that the new password contains exclamation mark (!), could this cause some kind of issue? Rest of the OPM users who haven't changed their AD passwords can login to OPM normally. Best regards, Janne
Monitoring of Domain Controllers
Hello there We are looking into monitoring our D/C's from OpManager but will not allow a service account to be a domain admin. I have found https://pitstop.manageengine.com/portal/kb/articles/how-to-configure-a-non-admin-user-for-wmi-monitoring but Domain Controllers do not have security groups to add a user to . Can you please advise what permissions are required for a service account to actually monitor multiple DC's? I would like to see replication traffic if possible.
No Data Available
Hi after i backup data and restored to a new opmanager server my switches interface's graphs have nothing to report ad show me "No Data" instead of this in,performance report also show me No data available in this period when i change the period to data before my backup everything is ok but after that is nothing also i try to add a new device but the new device also interface graphs has no data what ca i do for this problem?
Fix available for unauthenticated blind SQL injection vulnerability issue. Apply the latest service pack.
This is a security advisory for customers using versions 123052 or earlier. We recommend that you upgrade to the latest version of OpUtils, 123057, to fix the security vulnerability described below. Description: OpUtils contained a vulnerability through which it was possible to upload files using an unauthenticated servlet. This was identified and disclosed by Digital Defense, a provider of security risk assessment solutions. For details, please refer to the public disclosure published on January
Fix available for unauthenticated blind SQL injection vulnerability issue. Apply the latest service pack.
This is a security advisory for OpManager customers using versions 123056 or earlier. We recommend that you upgrade to the latest version of OpManager, 123057, to fix the security vulnerability described below. Description: OpManager contained a vulnerability through which it was possible to upload files using an unauthenticated servlet. This was identified and disclosed by Digital Defense, a provider of security risk assessment solutions. For details, please refer to the public disclosure published
OPMan URL Monitors
Hi, I'm not sure if this is an issue with the software or not but every time I click on Dashboard>Infrastructure Snapshot>URLs, all I get is a blank screen (see attached). This is a little frustrating as I need to make changes to some URL monitoring and I can't get in to view them. Can you advise?
Firewall
Hello I have Opmanager with Firewall add on for our main firewalls. We have many small branch routers that I need to manage but due to the high cost of firewall add on can I still add these devices as a switch to monitor the interfaces without monitoring all the detailed traffic.
OpManager Downtime schedule does not work with week
Hi, I have an issue with the Downtime Schedules when I add a new chedule. This schedule is every saturday at 9AM to 9PM When I saved the schedule I selected sunday but it show Saturday 13 in case of sunday 7 of january. And when I edited the schedule does not save in the frequency From and To. Thanks & Regards!
Excel Reports
After upgrading to version 123015 from 123000. My Excel reports are blank. They do not contain any data. PDF reports are fine. Any ideas?
error restore db opmanager
[01-09-2018]|[17:32:14:895]|[FINE] : ************** Restore operation started ********************** [01-09-2018]|[17:32:14:895]|[FINE] : Restore started on 01-09-2018 at 17:32:14:895 [01-09-2018]|[17:32:14:911]|[INFO] : Extracting property file please wait ..... [01-09-2018]|[17:32:14:911]|[FINE] : Extracting zip file :c:\ManageEngine\OpManager\backup\Backup_Pgsql_dic29_095808_11300.zip [01-09-2018]|[17:32:15:051]|[INFO] : Extraction completed. [01-09-2018]|[17:32:15:192]|[FINE] : no_of_threads
Monitor DHCP scope
Hello, I have DHCP server on Windows 2008. Is it possible monitoring DHCP scope with OpManager? Regards, Anton
strange problem on opmanager
Hello , Whant i login the opmanger and click the any menu on proggram, Application log out and log on automaticaly and repeat it continious . Duruing this time , i saw the below messages in th attached picture. Help please.
Dynamic Device Name Update
Hi There is any way to update device name automatically without delete the device and discover it again?
Add Powercom UPS
Hello, I have few Powercom UPS. How I can add it to OpManager and monitor input/output voltage etc? Regards, Anton
OpManager Mobile App
What is the latest on the new app you were working on? Is this still being worked on?
Add DHCP Server scan failed
Hello, after adding the DHCP server to monitor the scopes, it gives an error saying scan failed. The DHCP server is runing on a windows 2016 server and have the scopes replicated to another server. Any idea on how can i troubleshoot this problem? Thanks
Migration OpManager 11.6 to 12.X with NetFlow and IPAM Standalone
Hello, we're still running Opmanager 11.6 (+ Application Manager Plug-In) + NetFlow 10.2 and OpUtils 8.0 in Standalone mode. I would like to upgrade to the latest versions of OpManager step by step now. I followed your video tutorial, but it only shows how to migrate with NetFlow & IPAM as a plug-in. How would I have to proceed now? Request an upgrade pack of Opmanger incl Application Manager Plug-In without OpUtils and NetFlow? And then transform my standalone licenses of NetFlow and OpUtils into
WMI Monitors section missing
in opmanager 12.3.024 there is a section for WMI monitors when adding a monitor. These include helpful monitors such as CPU Utilization and Partition details of the device. in opmanager 12.3.048 this entire section is gone and there appears to be no good way to add these monitors. Can we get this section added back I have attached screenshots of what I am referring to.
Executing Powershell after alert triggers
Good afternoon, I have setup a folder monitor and when it triggers i need to execute a powershell script to remove the offending file. I have had a look through workflows and cannot see anywhere to execute a Powershell script. Is there any other way or am i missing something within the workflows?
Export Assets Information from OpManager v9450 and Import to v12.3.046
Hi Can I ask for help on how to export assets Information from OpManager v9450 and import to v12.3.046???
Opmanager patch
Where can I get patch "Build No - 123052 - January 17, 2018" to my opmanager 12.3.015 I can see that you have fixed alot of problems with xenservers i am facing at the moment.
error to load license in APM of OPmanager
i have the next error to load my license in the APM
URL Monitoring
Hi all, We are getting alerts for a few URLs being down and I cannot find anywhere to delete these alerts (not required). I have attached an example - can anyone advise?
Next Page