The service does not start.
The service does not start. After installing the OpManager service can not start when I click on start service, it starts and then immediately stops working.
Add Router using SNMPv3 in SPM Fails using the same credentials as OpManager
I am trying to enable SNMPv3 for routers in the SPM module. Every time I attempt to add a device using SNMPv3 it sits there for about 10 minutes and then tells me there was no response. The same device works with SNMP. The same SNMPv3 credentials are used to monitor the device in OpManager. Our company rules don't let us use SNMP on routers and firewalls. How can I get this solved?
OpUtils Backup
Hi can tell me the steps for copy my actual configuration to a new OpUtils server
Detection and Handling of State Flapping
Opmanager implement flap detection for monitored host? i looking for this feature: http://nagios.sourceforge.net/docs/3_0/flapping.html This feature is essential for my monitoring businnes
2nd SQL instance
I'm trying to setup monitoring on an SQL server but can't get opmanager to see the databases on the second instance anyone got any idea's why? thanks Harvey
Secure access to OpManager
Dear support, is it possible to secure the access to OpManager? (use https instead of http) Regards, Ramzi
Tracing device on Opmanager
Hi all Im using Opmanager 9 build number 9010 , What i`m trying to do is to trace the printers that i`m monitoring using the opmanager i.e to to know which switch that particular shared printer is connected as i have monitoring all the switches by the opmanager. Can i create a Map view containing of shared printer -----> and the switch that connected to it . OR the switch ------> and all the shared printers connected to it ?????? Appreciate your support ..
Netflow Install.. gone wrong somewhere... ...
I tried installing NetFlow on my server tonight, and it didn't work as I would have expected it to. When I input the Netflow server info in the plug-ins section, it test's OK and comes back to say it connected successfully. So I go to click the NetFlow button to connect to it, and it comes up with: HTTP Status 500 - type Exception report message description The server encountered an internal error () that prevented it from fulfilling this request. exception java.lang.NullPointerException com.adventnet.npm.NFAAuthFilter.doFilter(NFAAuthFilter.java:241)
ZyXel Templates
Hi, does anybody have templates for ZyXel equipment? GS2108 G ES2200 IES1248 IES2000 IES5000 ZyWall 5 ZyWall 2
Problem to see chart for interfaces
Hello, I'm running OpManager build 9400 in a Windows 2008 R2 machine and I have problem to see chart for interfaces. I'm sure that I saw chart working well for some machines but for some reasons charts stopping to work.But if I click on "Real Time" chart I see the it's work but no way to have data for chart and I still have "No Data Available". Any Idea? Best regards. Matteo P.S. See pictures for the problem
OPM monitor Steelhead
Hi Support, My client has about 20 Riverbed Steelheads(Wan Optimization) and OPM DE, they want to use the OPM to monitor the Steelhead status, such as optimization connections, hard disk status and so on. The OPM can provide some monitors about CPU、Memory、Connections, however i still can't find something about the hard disk, because the Steelhead hard disk has been destroyed recently by the aging. If OPM can do that, how to do? plz for your advice, thx in advance Thanks Tira
Is There a Way To Restore OpManager Back to Factory Defaults?
Hi Guys, Is there a way to restore OpManager to it's default settings (i.e. reset to factory defaults)? Thanks!
Restore problems
Hello I use after 9400, backup can't restore,,can not find the path,Please let us know how to operate
VPN session count
Hi, Would like to if there is feature available in opmanager to monitor the IPsec VPN session count in cisco asa 5520? Thanks, Sridhar
Syslog on OpManager
Hi there. I'm using the latest version of OpManager to monitor around 400 systems. I understand that OpManager doesnt store syslog messages. I'ld like to know if I can install another Syslog utility on the same server and make OpManager forward syslog events to that utility. If yes, how should I configure it? Thanks. Jayesh
Importing VISIO
Hi, I have a suggestion, enabling VISIO map import into mapmaker. I think its a very good idea
restore from Opmanger v9410 on MySQL to Opmanager v9450 on MSSQLExpress
Hello everybody ! I'm testing the new OpManager with MSSQLEXPRESS bundled. I Installed it without any issue. BUT, when I tried to restore my datas from OpManager v9410 (MySQL Bundled) to the new OpManager server (v9450 MSSQLEXPRESS bundled), there is a error concerning the datas version. Obviously, the version number are different (v9410 against v9450, see screenshots...) how can I restore my datas????
OpManager Error 1067
Hi, I'm installed a new probe server of Opmanager on a Win 2008 R2 x64 and connected this server to old OpManager DB. Before it similar server was worked with this DB. Server crashed and we replace it to a new machine with the same IP, DNS name and other configurations. But after that while I'm trying to start OpManager service system shows me the 1067 error. From command prompt OpManager starts but with the set of mistakes such as Process : CheckSNMPHash [ FAILED ] And from the
Report form for OpManager request.
I'd like to have the report form for everyday report for entire devices in our system. The reports need to be look like the following form. Name IP Business View Model Status SQL Server 192.168.10.5 Server Windows 2008 R2 OK VM1 192.168.10.2 VMHost ESXi Server Critical Backbone 222.558.1.*** Router Cisco **** OK So I can make the daily inventory report. Thank you in advance.
DownTime Report - Built In
It looks like this report hasn't gotten any love for a while. As far as I can tell, this is the only report that is going to show me how MANY times a device goes down and individual durations of those instances. It gives a start of outage and end of outage time, great, and then it gives the total duration of that individual outage, great. However, there are several issues with this report: The Total Downtime calculation for a device which seems like it should just add up the column total
Email Notification
Hi, Earlier my email id was configured in the "TO Email ID" field in mail server settings. I was getting email alerts for all the devices. Now I removed it and configured another ID but still I am getting alerts for all devices. pls let me know how to stop this. Sam Pragash.
IPAM Add-In
Hi All, I have just installed the IPAM Add-In on my OpManager 9200 install. It has done a great scan of a subnet with my servers on it and resolved the MAC Addresses and confirmed the reverse DNS matches up. But what I cannot figure out is how to find out the connected switch and port. What am I doing wrong? Thanks
how to change OpUtils 6 Bandwidth Monitor interface speed ? Is there a way I can change this manually?
how to change OpUtils 6 Bandwidth Monitor interface speed ? Is there a way I can change this manually?
how to change oputils 6 Bandwidth Monitor interface port speed ? Is there a way I can change this manually?
how to change oputils 6 Bandwidth Monitor interface port speed ? Is there a way I can change this manually?
SMS messages looping
Hi, SMS test actions works fine, however, the sms goes in a loop and keeps on sending the same sms test message over and over. It stops when the Nokia phone is disconnected. I use Opmanager 9 SP1 on XP working in a VMWare virtual environment. Thanks for any response Marc
AVAILABILITY MEASURED WITH PING
HI I Would like to know how OpManager measure availability with ping. What is the frequency of the pings, it size and other details oF the ping that measure the availability. What happened if the network is slow but available and the ping is missed? OpManager will measure that time as NONAVAILABLE?. What is the OpManager's Default time to to discard a ping. Thanks URGENT!!!!!!!!!!!!! please Excuse me for my english..
OpUtils Stacked Port Report
The Stacked Port Detail report only displays one MAC address per stacked port. How can I get the report to list all of the MAC Addresses for each port?
Unable to create a folder monitor in OpManager "folder not found"
I am unable to create a folder monitor in the latest version of OpManager 9101. When creating any monitor and clicking on "test" I get the error "folder not found" See the screenshot of the simple example below which is checking for the c:\windows folder. I'm using WMI, with local authentication (no active directory) Thanks! Jeff
new DATABASE format
Dear Zoho, OpManager user/customer for a long time, I noticed that you changed the type of embedded database within opmanager. For a long time (since v6700 I think) we are using OpManager with MySQL DB embedded. DO WE HAVE to change/upgrade our installation to the other DB embedded version ? And Do we have the possibility to export from MySQL to MSSQL Express (or PGSQL)... ? Thanks in advance for the reply
Problems with verified SSH credentials for process monitor
Hello, I repeatedly get failed when I attempt to use SSH credentials. I have verified the credentials: -using PuTTY on the OpManager server machine -verified the prompt, the user name and password Has anyone experienced this before? Thanks, Matt
Limit to business views for AD accounts?
Hello, I recently updated my OpManager install to 9410 and have been testing out some of the features. AD authentication is working well, however I noticed that when an AD user gets added, we don't have any options to limit them to specific business views as we do with local accounts. The only options I get per user are to change contact information. I understand the need for this ability is probably pretty low, but I thought it would be a nice feature. My business has considered using OpManager
CPU utilisation
hi i am getting this error pls help me out on this CPU Utilization is 100%, threshold value for this monitor is 95%: Top 3 Processes:-RtRootSvc - 12.5%;wmiprvse - 0.32%;svchost - 0.16% Critical
How to monitor HP ProLiant Server - RAID / Power / etc
Hi, Can someone guide me how to monitor the HP ProLiant Server? Basically i want to monitor the RAID, Power Supply, System Health and etc. I have downloaded MIB from http://h18000.www1.hp.com/products/servers/management/hpsim/mibkit.html Im not sure whether this is correct file or not, please guide me next step from this. -- Regards, Anandharaj System Engineer (Unix / Linux)
Negative CPU Utilization
Why do i see negative CPU utilization? What seems to be the cause of this? Is there problem with my OPManger 7 build 7025. Thanks..
Is there any way to implement Single Sign on on Opmanager?
I've migrated to 9400 build and the AD domain feature works fine, but it would be great to get the credentials from the browser like ServiceDesk does. Thanks! Best regards.
How to remove MSSQL dashboard [9401]
Hi How do you remove the MSSQL dashboard from a server after you have unchecked all of the MSSQL monitors?
IPv6 support
Does OpManager build 9400 support IPv6? Regards, Ramzi
Manage Engine Dashboards
Hi All, Any third part tool available for the presentation of Opmanager dashboards Regards Adnan
SNMP not working for SUN Solaris
Hi, I have added the server, configured the CLI access credential. I can ping the server from OpManager. But I tried SNMP credential and it is not working. Can i get some advise on how to troubleshoot this? I am using "public" community name. How do i crosscheck whether the SNMP is running in the server, or the community name is enable? Or is there any other config i miss out in OpManager? Running SUN Solaris (HP Server). Thanks.
Problem to signal alarm for syslog messages
Hello, I tried to give me alarms when receiving syslog messages but without success. If I go under "Alarms" -> "Syslog Alarms" I still have nothing! Under "Syslog Rules" I have only one rule and is configured in order to accept all messages. The rule is set as: Facility Name: Any Severity: all checkbox checked Match Text: Alert Severity: Attention Alarm Message: $Message Number of Occurrences: 1 Time Inerval: 60 So, with this configuration I was sure to accept all syslog messages but nothing. But
Next Page