OpManager 10 not discovering all Hyper-V guests
Hi all, OpManager 10 doesn't seem to be discovering all Hyper-V guests on a given host - there are definitely two guests present, but OpManager is only showing one of them. If I add the missing guest manually, OpManager won't let me change the device category to "Virtual Device". Is there some way to force OpManager to detect all guests again? The Hyper-V host is running Windows Server 2012. Many thanks, alec -- My network security/forensics blog is at [url]http://wirewatcher.net[/url]
Adding New vendors name Ruckus under Wireless category
presently its showing under unknown, how to specifically categories under Ruckus vendor. Thanks.
Notification Profile for interface threshold
Dear Concerns, I need to know that how i able to configure notification profile for interface threshold. Regards, Arshad
hardware sensor alerts
Hi, We have recently upgraded to opmanager version 10. We have observed that it detects the HW failures like power supply on cisco switches which is not available in ver 9.4. I want these alerts to be notified via mail? what is the procedure? Thanks, Sridhar
Sendin email in plain text
OpManager 10 build 10000 sends email alerts not in plain text. How to fix it?
Installing OpManager Enterprise / Probe
Dear goodnight. We will migrate from version essential for the enterprise, but rather would like to know, what the minimum requirements for installing the Probe? How many probes must have for 1000 devices, and what the minimum requirements for installation? How much is consumed I / O to disk in a probe? For 1000 devices which scenario recommended by ManageEngine? Thank you.
error restoring OpManager DB
Hi team ! I tried many time to restore a Production DB to a dev server and everytime i have an error : [05-30-2013]|[14:11:12:085]|[SEVERE] : jdbc.RestoreException: Error occurred while Restoring Data. at jdbc.RestoreDB.readFileAndRestoreData(RestoreDB.java:146) at jdbc.AbstractRestoreDB.restoreDB(AbstractRestoreDB.java:97) at jdbc.AbstractRestoreDB.doRestore(AbstractRestoreDB.java:416) at jdbc.RestoreBackup.restoreDB(RestoreBackup.java:81) at com.adventnet.me.opmanager.dbmanager.DataMaintenance$BackupRestoreWindow$RestoreRunThread.run(DataMaintenance.java:704)
Network Monitor is not updating
Dear professionals, The network monitor is not updating in Oputils 6, when i add an device it shows as up and monitoring status is running i set monitor every 20 sec and nothing is changing the last update time is kept on the first time i added the device i tried to bring that device down and nothing changed and status still showing up in green Please guide me if there is something wrong i am doing. in addition i can't scan windows machines like in oputlis 5 that have windows credential tab to enter
DMS is waiting registration, Trend Anti Virus, Firewall ports opened and exlustion applied
Hi We use OpManager 9 enterprise (build 9101) and on the machine we also need to run our Anti Virus. It seems there is an issue with Trend Micro Officescan virus with OpManger and I have been working with support to help resolve the issue but still running into problems. I have been advised that I need to open firewall ports and set exclusions for the Antivirus, I have done this but still running into isssues. We have set up exclusions both on folder and application level and excluded the application
Exception when generating Visio diagram. Refer to the log file for details
Good morning to you all. With version 9.0.9011 and MS-Visio 2007 I was trying to import the map in XML format but I received the error message "Exception when generating Visio diagram. Refer to the log file for details" Can you help?
Build 9000 -Unable to fetch Managed Object details for the object
We are getting the error "Unable to fetch Managed Object details for the object : 10.150.0.18" when attempting to open up a recently added device. We get the same error "Unable to fetch Managed Object details for the object : undefined" when attempting to remove partitions that are under Performance Monitors for some Linux VMs running in ESXi. Also our ASA5510 that is at 10.10.6.1 is reported to be at 10.10.6.10, yet monitoring is working. I did run the RepairDB.sh, no changes except that it removed
active directory and opmanager
Hi, I can't understand if it's possible to use active directory monitoring tool with OpManager. Exactly, there is an add-on or it is inclused? thank you Regards Lorenzo
Alarm Escalation Rule only during Business Hours
Is there a way to implement Alarm Escalation Rules that are only alerting during certain times (exp. Business Hours)?
Change Title in OpManager
Dear ME Team, How i can change title in OpManager same like servisedesk.
Collation error in opmanager v10000
Situation : I have a prod server which is installed opmanager v10000 (but was upgraded from version 6 to 7, 8, 9 and 10) I have another dev server which is installed v9 then upgraded 10. Both are with MySQL database installed, in english language, but I used to put some field with accent. To test new SP I used to backup the prod DB and restore it on the dev server. since a while,... i'm NOT able to restore my full database or configdata backup to my dev server, because I always get an error concerning
OpManager and Silent Option
Hello, I want to install OpManager using the "-silent" option. Unfortunately, I find no documentation allowing me to use this option. I guess this option needs to use a configuration file. What are the options / keywords that i can use in this configuration file? How can i specify this file to the silent option ? Maybe this file can be generated from a previous install realised in console mode ? Thank you for your help. RG.
Customize Widget
Currently widgets cannot be customized to remove or add fields. For instance we would love to use the CCTV feature to show our users what is going on in IT. However we can't remove or change the way server names are displayed in the existing widgets. This is important because: 1. We don't want to reveal the host names of our servers to users for security reasons but its important to IT to use the host names in OpManager for monitoring. 2. The hostnames would make no sense to most users anyways.
Notification Profile - "Probe down" not working
Hi I would like to create a association with my nofication profile on the central server, if "any Probe is down". This is not possible,because I have to assign it to a device. How can I do this? thx
can not access api link ?
Hi all i tried three time with Chrome & firefox & IE but still receive errors ( access link API link: http://localhost:7080/oputilsapi/v1/ipam?operation=GET_SUBNET_SUMMARY&subnetAddress=10.199.64.0&key=41d8dbd0-5ff6-4162-957f-921f934f1486&format=xml ) with chrome & IE : come back home page after access API link with firefox: errors page notice "Sorry, OpUtils finds trouble in loading this page. Please return to Home Page and retry the same operation." Can anybody tell me how to fix it ? thanks
Rack View - Blade Servers
Question: Is there a way to create a blade or "multi-node" system within a U-space? Example, I have a Quad-node system in a 2U platform, and each of these 4 nodes has a managed IP address. I do not want to show them as four servers in the rack view, I want to show four IP addresses attached to a single 2U system. (Specifically, these are four ESX hosts running within a Quad node 2U SMC server) The same would apply to "twin" systems, which would be two nodes running within a single 1U system etc etc.
show only active alerts which are unassigne
Is there a possibility to creade a dashboard that shows only active alerts that are unassigned? In previous versions this was possible to select this. In SQL it would look like: SELECT FROM [opmcentral.[dbo.[Alert WHERE SEVERITY != '5' and WHO = 'Unacknowledge' Thx
Importing files with Chinese content, garbled（ IP Address Manager）
Hi. The IP Address Manager currently being tested in ManageEngine OpUtils(Release Version 6.1 ) , In a subnet, select "Import IP Address Details"，The previous ip address file (.csv) imported into the IP Address Manager, the import was successful, However, due to the contents of the original document field contains Chinese, imported into a garbled beyond recognition; If the import field content is digital, letters, there is no problem. How to deal with import content of the original
Install user guide
How can I install full user guide? The original folder is ManageEngineOpManagerhelpuguide but new user guide zip use ManageEngineOpManagerhelpuuide. That result in path not found errors. I have tried changing path in ManageEngineOpManagerwebclientdevicesjsopmanagerJS.js //Peter
Avaya ERS Memory Utilization from OID calculation
I am attempting to create a custom monitor that will provide Memory Utilization for Avaya ERS 45xx/5xxx switches. Avaya allows access to an OID for Total Memory (.1.3.6.1.4.1.45.1.6.3.8.1.1.12) and one for Available Memory (.1.3.6.1.4.1.45.1.6.3.8.1.1.13). I have created monitors for these individual OIDs to be sure the data is available and correct results are returned. I would like to create the monitor and associate it with the Memory Utilization snapshot dial. I looked at the following KB
OpManager Notification Settings
Has anyone had an issues where the notification settings changing on their own? One day the team goes through and sets up the alerts in the notifications and the next day they have changed and some items are unchecked. My team swears that no one touch them but I find it hard to believe they can change on there own? Any ideas? Thank you,
OPmanager and Exchange 2010 support
When will you implement it? I need Exchange 2010 support in my monitoring software. I like Opmanager and want to buy it for our company, but we use Exchange 2010. I´m thinking of searching at other monitoring softwares if Exchange support in OPmanager implementation is too far away in the future.
How to optimize BBDD and server performance?
Hi all, We are running Opmanager and Netflow Analyser in a 4 quadcore and 4GB RAM server. We are experiencing bad performance (about 1000ms to charge the web pages) so we want to improve this performace. Any idea? Another question is that currently we have the BBDD installed at c:\ where there is few free space, so how can we change the BBDD to another disk with enough space? regards, Christian
Interface Alert
OpManager is showing various alerts some interfaces on the switch, why these alerts are appearing? Accessing the snapshot of the interface: Administrative Status - UP Operational Status - Down There are several interfaces that with this status are not generating alerts and wrong. Tiago Toledo - Bigode Blog: http://www.pastelariadigital.com.br
Openstack
Hi, I see that you have started building monitoring functions into Opmanager to cover EC2 and Azure cloud infrastructure. Are you going to be doing the same for the Openstack platform? This is already widely in use and would be most beneficial to include in Opmanager for our own (and I am sure many others) Infrastructure and add to the value we already get from your solution. Thanks Eugene
Virtual devices vs servers
Hey I have imported 3 of my 12 ESXi servers, and have gotten the virtual servers imported. Then i have moved my Exchange 2010 servers to "exchange", which caused the Exchange server object to be moved to "servers" instead. Is there a trade off, if I move all the servers (virtual devices) into servers instead ? Just so I have them all collected in one panel view....
Cisco Small Business SG500X-24p Switch
All, I have tried to get the Cisco SG500X-24P switch recognized by OpManager, but I am having no success. I have downloaded the mibs from the Cisco website, copied them to the opManager mibs directory. I have tried using the mib browser in the admin section of OpManager with no success. Does anyone have a template that I can import as I have had no success creating my own. Thanks
how can Opmanager alerts be sent to a GSM modem without serial port?
Hi there, It's a kind of Apollo13 rocket science we've seen in Hollywood. I want to connect a server with Opmanager Build 8812 to an existing SMS alarm system, named T, with GSM modem functionality but without COM port. T accepts only digital voltage input. Is there any work-around solution? B.
how change port for NCM NetFlow in opmanager
dear sir how can i change the plugins port in opmanager i use this C:\opmanager\bin>ChangeWebServerPort.bat but i encounter new error Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection. the web page open but when try log in give me the error
Opmanager as a VMware appliance
Hi, Have you guys thought of building / selling Opmanager as a VMware virtual appliance? Everytime I deploy a new Opmanager I have to go through the exact same repetitive tasks of building a server, updating it and then do the Opmanager, Netflow, IPAM etc. installs. Having an appliance that already has the default setup would make this faster and by far more supportable for your support teams. If they don't have to contend with "Where is the customers install directory" and " which OS are you using"
Network map LLDP support
Hello Any updates on when LLDP will be supported for the network map. We do not run Cisco devices so CDP doesn't work for us.
Allarm Managment
Hi, is possible to delete an allarm? I try to explain better... I have bought OpManager plus Netflow plugin. I have also monitored the ISP Router. I received a lot of error message about the Authentication SNMP from the ISP router. I have made a little research in the web and the cause may be the presence of 2 Network Management tool ( Mine with OpManager + ISP with nagios ) I'd like to delete this allarm. Is it possible? I'd like to know also how I can do the backup of the Database. I use the DB
Permanently disable ads on the login page.
Hello Is there any way on the server side to stop the scrolling adverts on the log in page. When accessing Opmanager over a low bandwidth connection using RDP or Citrix it really slows down the log in process, and since the ads don't contribute anything to the functionality of the application I would like to disable them globally.
Disk IO Graph and Stats
Hi, OPM showing Disk IO on Device snap shots till GBPS / TBPS but when i check disk IO graph it shows me in KBPS. Also, Disk read / write also showing in KBPS. Find the attached snap shots for clear understanding. Kindly advice regarding Device Snap Shot disk IO
Administrative Status
About this functionalities of OpManager, it disables the setting in OPM and not on the switch? Or using this option will disable the port on the switch? How to disable switch ports? If you want to administratively disable an interface, it is possible with OpManager in just a few clicks. Here are the steps: Go to the required snapshot page of the interface you want to disable que. Under Interface tab, click the Disable button. The interface gets disabled and the interface's status is changed to Down.
Backup script - Press any key to continue
Hi, We try to backup OpManager by using a daily scheduled script. We are using the following command line: BackupDB_Postgres.bat" -mode all -destination c:\tempbck It's working fine, but... at the end of the backup "press any key to continue..." appears. Then next schedule failed because the current one do not finish while we presse a key. Is there any option to add to the command line ? Thanks a lot. Vincent
Next Page