Just i configure Opmanager to monitor my server everything is fine but i am not getting alerts to my email Id. But geting alers when i click on test mail
Just i configure Opmanager to monitor my server everything is fine but i am not getting alerts to my email Id. But geting alers when i click on test mail
Automated email alerts
Hi, Is it possible to send all alerts to an email address of my choosing for monitioring purposes? Cheers Ron
OpManager iPhone App
Hi, I am trying to setup the opmanager app on my iPhone, and cannot seem to find my account server / http settings? can anyone tell me where they are? Cheers Ron
Question about AMS
I have OpManager 250 licensed with AMS expire for few years. If I want to purchase more 250 licensed. Do I need to renew AMS for my current 250 licensed before start to purchase more 250 licensed ? If yes, Do I need to pay AMS fee back to few year ago when my license start to expire ?
Unable to import IMB for Synology Diskstation
Hi, I have a problem importing the MIB that comes with our DiskStation. Any help to get this working would be great, thanks! The MIB-files are included. Regards, /André
How can configure the IPMI and where will get the information
dear sir i would like to ask how can i use IPMI and what is the right configuration and where will be the information will shown after get it thanks
Backup / Restore version 10
Hi Guys, I have OP-Manager version 10.0 (10000) installed in production. This is already an upgrade from version 9 so it is still with MYSQL DB. I have backup of this DB together with all needed files using BackupDB_Mysql.bat . I am trying now to have the DB restored on a fresh install of 10.0 (10000) but i cannot as the fresh install of version 10 doesn't support anymore MYSQL [07-15-2013]|[10:00:31:863]|[FINE] : BACKUP_FORMAT : MYSQLOUTFILE [07-15-2013]|[10:00:31:863]|[FINE] : Backup taken in
Temperature & Humidity Need two places after decimal.
I am trying to get the temperature and humidity values from RIM 600, Environment Monitoring tool. The values are successfully picked up, but are rounded off. Is there a way to get the temperature as 23.50 rather than just 23 ? Thanks, Jejin
Could not parse the Compex Mib File
Can you give me some advice on how to correct it? http://www.cpx.cz/dls/compexMIB_V2_30.mib Thanks
Folder Monitor - Modification not alerting
Hi, I have created a Folider Monitor and a Notification Profile to alert me when a folder is modified. When the folder is modified I dont get an alert but if i test and ask for an email when the folder exists the attention email comes through Any idea why the Modified alert may not be coming ? My test is creating a file in the monitored folder. The "Date Modified" attribute changes at that point
Alert email is not sent with current polled value.
Hi Team, We have configured the disk partition utilization monitor and set the critical threshold as >95% and for trouble >90%. Critical Alarm was generated when the partition utilization reached 96%. Even the current polled value changed to 90%, alarm condition is still in critical and the alert email generated was also with the previous value 96% rather being updated with current polled value. Since there is no >= condition available, for 90% it did not even send the trouble alarm too. We just
Wildcards in fIle age monitoring?
Hello, is it possible to work with wildcards in file age monitoring? With OpManager I want to monitor files with fixed 10 signs at the begin and variable digits and signs behind. Examle: "ABC_I_103_1372396923195_187.in" is a filename the "ABC_I_103_" every time is fix and the part after varies from file to file. In the normal way these files will be deleted after processing and I want to create an alarm if the file stay more than a specific time. As there are many files with different alarm level
How to monitor a Cisco ASA 5500 VPN connections
Anyone using ManageEngine's Opmanager to monitor up/down status of VPN , in my case a Cisco ASA 5500. Thanks, Greg
APC Product Monitoring Solution (Urgent)
Hello OpManager Team, I am glad to write you that, i have used your product OpManager to monitor various application, servers and UPS, the end result was satisfactory. But it is unfortunate that i can't recommend your product (OpManager) to my organization as you have not provided complete monitoring solution for APC product except (UPS). I have to monitor following SNMP Enabled product through OpManager. 1. APC EMU AP9340 (Temperature & Humidity) sensor manager 2. APC Cooling Units (Old,
Add Description to instance for a custom snmp monitor
Hi is there a way to add a description to the instance for a custom snmp monitor. Else it is a bit difficulte to find out,which instance is which device.
HP ProCurve 1810G
Hello I'm curently evalating OpUtils. I'm trying to setup HP ProCurve 1810G - 24 GE switches. Unfortunately it does not work as expected. When added as switches, the status become "failed" without any message. When added as router, no system is detected. Can you help me?
OpManager supports SQL 2012?
OpManager supports SQL 2012? I want to migrate a PostgreSQL for SQLServer 2012 is possible? Has some additional configuration? SQL Server 2012 Windows Authentication like this Tiago Toledo - Bigode Blog: http://www.pastelariadigital.com.br
AKCP SensorProbe Template
Has anyone had any luck with the AKCP Sensor Probes? I have it setup and created custom monitors for it, but I had to create 8 seperate monitors, I was wondering if there was a way to have a single monitor that would pull all temp date. Looking more to add the temp table to a widget on dashboard. Thanks in advance.
there is no data available of "reserved IP" via Network-->IPAM
Hi, We are trying to use the Opmanager--->IPAM to manage our static IP addresses of our DHCP scopes (instead of using XCEL file), but I am unable to see any information of “Reserved-Static IP”, please see the following: Would someone please help me to fix this issue: there is no data available of "reserved IP" via Network-->IPAM. Any information and help would be much appreciated. Many thanks in advance. Regards John Installation & JVM information OS Name & Version : Microsoft Windows
Can i install Oputils 6 to ubuntu server 13.04?
Hi all When i try to install oputils to ubuntu server 13.04, i have this message: root@ubuntu:~# ./ManageEngine_OpUtils.bin - console InstallShield Wizard Initialisation de InstallShield Wizard en cours... Recherche de Java Virtual Machine en cours... . Pr‚paration de Java Virtual Machine en cours... ...................sh: 1: /tmp/isjG39To0/bin/java: not found root@ubuntu:~# java -version java version "1.7.0_21" OpenJDK Runtime Environment (IcedTea 2.3.9) (7u21-2.3.9-1ubuntu1) OpenJDK 64-Bit
Using existing MSSQL database
How can I install OPManager using existing MSSQL database ? I want install a new OPManager in a new server but I want use the existing MSSQL database from the old OPManager. Thx, Rio
Regular expression in log monitor is unpredictable
I try to use regular expression in log monitor, keep appending text that hit that patten in the log file and update status, however 1. The first alert can be triggered after several "keep appending text that hit that patten in the log file and update status" 2. After first alert, we clear it, then we cannot trigger it again (even "keep appending text that hit that patten in the log file and update status") For example, Regex: ^LOGRECORD Log entry: LOGRECORD: this is a test <Error>, for the log monitoring
Device already exists and removeDBEntriesNem didn't work
Hi, when I try to add a device which was deleted before, I receive the error message that the device already exists. But it didn’t’ exist in the GUI (OpManager build 10100). So I search a little bit and found the following entries: http://support.opmanager.com/sd/AddSolution.sd?solID=1808 http://forums.manageengine.com/topic/device-already-present-in-the-system-30-7-2010-1 Our DB is an PQSQL. Processing the command RemoveDBEntriesNew.bat with the IP-Address of the device to delete, I receive
Is there a way to get an overview of a performance monitor on multiple node with threshol status/color?
Hi We recently added a performance monitor on our ProLiant G5/G6/G7/G8 servers to monitor the intake air temperature. The monitor works fine but I wish we could have some sort of widget that give the status of the monitor for each server ( we have more than 60 servers). For now i'm using the ''Top N monitored values of a performance monitor'' widget but there is no way of knowing if the temperature for each server is in his threshold. thanks
Make a fresh opmanager installation on a new server, using existing database on existing SQL server
What steps should I follow to move my OpManager installation to a new fresh server. I am using MS SQL on another server as the database, and this should be kept active on the new installation. My plan is to install the exact same build (9410) on the new server, but what should I choose when the installation process asks the backend database I want to use. Here I want to choose my existing database on the SQL server, but fear it will overwrite or make trouble. Is there a test-by-step guide to moving
Monitiring EMC iOmega storage
I have some storage - EMC iOmega StorCenter ix2-200 it setup settings: SNMP user, password, SNMP_broker also i have it MIB. How i can monitoring this device in OpManager??
Opmanager - Java consume 99% CPU - Windows Server 2008 R2 Service Pack 1
Hi, I have installed opmanager version 10 Build Number : 10100, and addon netflow plugin. My server Windows Server 2008 R2 Service Pack 1 - 64 bits 8 GB RAM Processor Intel Xeon CPU E5-2630 @2.30GHz - 2.93 GHz (2 processors) see print's files Process java.exe consume 99% CPU ! Can you please let me know how you fixed it? Thank's
Subnet discovery - Sonicwall - Brain wave needed
Hi, I am doing some testing on this product for a client of mine. The main feature the client needs is the Rogue devices detection. I appreciate if anyone could assist me with the following questions: 1, The subnet of Rouge device detection could not be set as a manually subnet and it should be detected via a router. Is that correct or there is a other way round it. (I tried to add a subnet manually and it finds new devices but does not show the devices and even the subnets in the Rogue section)
Opmanager reporting
Greetings. After one of our customers have added some devices (network and server), at the reports tab, he tries to do a report, but, some of the devices that are detected with hostname, in the report shows the hostname instead of the IP. OpManager has the option for add the IP in the report with the hostname? Regards.
Switch - cpu usage
OpManager identifies the correct model of the switch, but can not monitor the CPU. Why? Tiago Toledo - Bigode Blog: http://www.pastelariadigital.com.br
Print server monitor?
I would like to monitor a Windows 2008 R2 print server. How can I add monitors for things like global print queue, up/down status of individual printers, number of jobs/minute, or anything else print related? Thanks
Glance Not Reflecting Physical Memory
Yesterday, I have upgraded 4GB to 6GB RAM.inhpux server Can you help me find out why this is not reflected in Glance when machinfo and swapinfo looks fine? Thanks.Yesterday,
Getting delayed webalerts in Opmanager
Hi, I am getting delayed webalerts in Opmanager. we are monitoring some processess running in linux servers.when some processess goes down getting alerts after 5 to 10 mins. If I stop and start the opmanager service then it works fine. what could be the reason? Sam.
Access Denied when running .bat file w/vbs script in it
Hello, I'm trying to run a .bat file that has a vbs script in it but I keep getting access denied. I can browse to that network folder (with the current user logged in to my test machine) and can run the .bat file just fine with no errors. Screenshot below. The .vbs script is a script to remove Office 2010. I'm running this from the Custom Script command in desktopcentral.
RFC 1212-object error
I am trying to load a MIB that Linksys sent me so that I can setup my WAP54G v3 access point with some interface monitors, etc. I have the Linksys MIB in my MIB's folder, as well as 1155, 1213, and 1215 but get an error about RFC1212 missing. I looked at line 11 column 39 and see this in that location: IMPORTS enterprises, IpAddress, FROM RFC1155-SMI DisplayString, PhysAddress FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; I have attached the error screenshot as well as the Linksys
Getting Notifed from all Eventlog Errors
Hello Folks Can opmanager capable of notifying me when any event log error occurs on the server. We choose Any application failure or other Any System failure rules and associate them with the server . But we didnt notifed . is it possible to that ? Thanks.
Error parsing MIB:8212G-BB.mib
Error parsing MIB:8212G-BB.mib Exception while loading MIB:IMPORTS failed: Could not find the file : /opt/ManageEngine/SMR/OpManager/mibs/RFC-1155-SMI
Servers randomly losing CPU and Memory monitoring stats
Hi, Just checking if anyone has come across this issue. We have recently signed up to OpManager and spent some time getting all our servers added and monitored. Yesterday i noticed that about 20 of our monitored servers no longer showed stats for CPU and Memory monitors (see attachment). I can confirm the monitors themselves for both still definitely exist under performance monitors and that the credentials used (WMI protocol) is passing the test. The credentials used had previously worked and
OpManager REST API Response Schema
Is there a Schema/XSD for OpManager XML Response? I see the examples on the OpManager REST API page but no reference to an XSD or Schema.
Notification Profiles - Edit Profile Name?
Hi guys Anybody know of a way that you can edit your profile name within the notification profiles? Currently if you go - Admin - Notification profiles You see a full list of notification profile you have created, however when you click edit next to the Notification profile you're currently unable to edit the name (I presume this is because the profiles are associated to the devices) Is there anyway that the profile name can be edited? I have quite a long list and I would just like to edit them so
Next Page