XenServer Monitoring possible?
Has anyone used OpManager to monitor Citrix XenServer? I'm guessing it can only monitor the typical snmp stuff. It would be nice to have an addon for XenServer. Has this been asked before? Thanks!
checkpoint firewall
how to monitor processes checkpoint firewall?
Monitor Temperature sensor by OpManager
Hello , I would like to add a sensaphone IMS 1000 on OpManager for monitoring the temperature sensor connected to sensaphone so how to proceed because i try it to add a new template and import MIB Sensaphone the add it on snmp trap but it cant detect alarm Regards Ahmed
Can I add Modems of remote users to Opmanager?
Hi, I am completely new to Opmanage and trying to understand how to make the best use of it. I am sure Remote users modems cannot be monitored on Opmanager. OR .. is there a way I can ? Please help. Thanks
APM plugin could not be installed
On trying to install the APM plugin, received the error "Please enter valid Opmanager install location" - which had been entered correctly. Opmanager 10200 on Windows 2003 R2
The RPC server is unavailable when run firewall
i install op manegar and add descktop in this.but now i need to run firewall in clients that have windows xp, but when run it,not coonect wmi on clients..please help me
CPU does not appear while monitored using WMI
HI Team, we are using opmanager 10200 build .we are able to monitor more than 100 servers and components without any issue .we have problem with only one server while monitoring its CPU using WMI .I have verified the server for credentials both SNMP and WMI has passed .all other components like memory disk are being monitored without any issue but only CPU resource utilization fails even during test monitor .How ever am able to monitor the CPU using SNMP can anyone help me to find the root cause
RackBuilder
Hi There is a way to create a CCTV view that includes the RackBuilder and the Web Alarms in the same screen?
ESX 5.5 issue ?
We have noticed that Opmanager is not keeping track of VMs properly. We recently upgraded to ESX 5.5 but it may of been happening before. If you drill down into one of the ESX hosts, the number of VMs at the top right is correct, but the listed VMs on the server are not correct and number of VMs does not match the top figure. This is happening on all the ESX servers we are monitoring. We are running the latest version of Opmanager.
Request: Link to device page after adding it
Can you please add a link to the "device added successfully" page that will open the device I just added? This is just a small annoyance, but after adding a device, I have to search the IP address or name to find it. It makes more sense to just have the link right there. Thanks :)
Are you sure you want to leave this page popup - after IE11
Hello, I just upgraded to Internet Explorer 11 and now, when i use OpManager i get a lot of pop-ups with the message "Are you sure you want to leave this page ?" with option "Leave this page" (it opens my submap), with "Stay on this page" (dows nothing). So how can we get rid of this pop-ups from IE ? Thanks.
How to setup ManageEngine OpManager NetFlow Plug-In
Hi everyone! Like as the title, I want to know way to setup and run NetFlow Plug-In in ManageEngine OpManager. After installed ManageEngine OpManager, then download this plugin from here: http://www.manageengine.com/network-monitoring/download.html My way install: chmod a+x ManageEngine_OpManager_NetFlow_Plug-In_9861.bin ./ManageEngine_OpManager_NetFlow_Plug-In_9861.bin -console I don't see anymore the detail document for installation also config this plugin to integrated with ManageEngine OpManager
Port History
Hello ! I am trying to use oputis and there are some problems. I am unable to search in port history with different browsers , but such kind of search in rough detection is working. And the second thing is that oputils is missing about 50% of information when scannig switches automaticaly 3 et once and I am unable to set scanning less than 3 devices at once. Thank You!
OPS MANAGER KEEPS SENDING CLEAR ALARM EMAIL
Hi, my ops manager keeps sending the clear alarm email over and over. I need the way to stop it from sending. All switch ports are up and clear! please help
OpManager Mount Point monitoring not showing accurate data
We are running the current version (10200) and followed the instructions to enable mount point monitioring (http://support.opmanager.com/sd/AddSolution.sd?solID=36001). But after that is done all drives (mount points and local disk) all show the same percentage open. For example we have an Exchange server that has 3 local drives and 14 mount points and all drives are showing are showing that they are at 75% capacity, when in reality their capacity varies greatly but some are nearing full. All
RAM is not automatically monitored
Hello. We have an issue with one of the monitored VM. RAM is not examined automatically, at the same time pressing "Test Monitor" in "Memory Utilization" monitor gives results without any issues. We tried to monitor the VM from different Probes, and got the same result. Any other "monitors" works fine for the VM (like CPU utilization, other) The build number we have on the Probes: 10200 Please let me know, what information I need to inform of, in order to solve this trouble. Thank you.
clearing sms log on server
hi anyone know how to clear the sms logs that weren't sent on the opmanager? JM
Problem adding ESXi hosts
Hi, We have a problem with our OpManager installation. I have scanned our network, and I have ended up with 4 ESXi hosts and a vCenter, in the Unknown category. When I'm doing a rediscovery, I get the error message: "Failed to connect the VMware HostWebService (Device may not be reachable / Credentials may be wrong)". I have verified and tried the following: 1) The server OpManager runs on, is able contact the ESXi hosts. 2) Firewall in ESXi is set to allow port 443 and server is not in lockdown
Associating database for Monitors
I have been testing OpManager for a deadlock issue that we have from time to time to see if the monitoring will help. I am having a hard time getting this to work on a few of the database servers. At first when I'd select the MSSQL under add monitor and i'd get an access denied. I got pass that part, but now when I try to click to associate the databases, the next screen only shows "Select all", but none of the actual databases, as I of course don't want to select everything... Any ideas on this
HP-UX
Dears, i trying to monitor HP-UX servers in my network i set the credential correctly (SNMPand CLI) and i test them its work normal, but the CPU, memory and disk utilization kpi not appear at all, i test the monitors from performance monitor for each of them but doesn't work. i'm using the latest OpManager build version with latest build. Regards,
Mail Server settings for Gmail in OpManager not working
Hello, I have configured gmail for the mail server settings in the free version of OpManager (build 11100) but am not able to connect to gmail, I have followed the settings from another post but I still receive the error message below. Unable to connect to the mail server. Please check if the Mail service is running on the specified port. Can you please help us to resolve this?
Clear database
Hi: I want to clear out the OpManager database and start fresh with new scans. How do I delete/clear out the database? I have a backup already. Thanks.
Extract the license
Hello, I have problems with a server running OpManager, and I'm installing to another new server. How do extract the license that is working today and move to this new server? The person who installed the system no longer works for the company. Thanks for the help.
Error parsing MIB: Couldn't resolve these MibNodes
Error parsing MIB:HUAWEI-MUSA-MA5100-MIB.mib Exception while loading MIB:Could not parse the file /var/opt/ManageEngine/OpManager/mibs/HUAWEI-MUSA-MA5100-MIB.mib. Couldn't resolve these MibNodes : { hwMusaSPvcIndex } I attach the mib. Please let me know how i fix this mib Regards Miguel
SMTPReceiveMessagesReceivedPersec Messages still accumulates numbers
SMTPReceiveMessagesReceivedPersec Messages accumulates Messages. According to its title it should Show Messages per Second and not total Messages send. When will this be fixed? I complayned about this for some time now.....
After 60 Probes Central Server starts slowing down for each additional probe.
I have 66 probes at my 66 centers, if I stop 6 of them, then Central Server can load the Home page (or any page) in about 1-2 seconds, each additional running probe over 60 adds 1-2 seconds. I am going to setup our 67th data center probe next week and my load time for the Central Server home page (or any page) is 12 seconds. I need help getting this fixed. I called Tech Support, their response is that I am not supposed to use the software that way. Where can I get real support from people who aren't
MS SQL Databases not showing up
I upgraded to 8040 earlier this week. I'm attempting to add MS SQL monitors to some of our database servers. When I do, none of the databases are listed. I have another database server that was already being monitored pre-8040, and it still recognizes newly added databases fine. Is this a 8040 issue or something else?
Chrome 31 errors
Chrome upgraded to version 31 yesterday and I am now receiving confirmation errors in Opmanager when trying to change pages or reload. Has anyone else seen this?
IPAM plugin FAILED Trying to start PostgresSQL
System: RedHat EL 6.4 x86_64 OpManager for 64bit build no. 11100 running OK IPAM_SPM plugin installed OK under OpManager directory The Issue. When i start manually ipam plugin with startOpUtils.sh i got this error: "Trying to Start PostgresSQL server Failed" I attach the file serverout0.txt Please, let's me know some about it Regards Miguel
cmdb
Installed the latest version with CMDB plugin, pages gives the following. Initializing proces, restarted server etc. but still.
Credentials OpManager
Hi, Is it possible to import many credentials from CSV because its painful to add one by one ? Regards Ahmed
DHCP SNMP Monitor Returns 0 Value
So I have set up a new SNMP Monitor for DHCP Free IPs. When I use the MIB application to query the server, it returns the correct values, but when I try to do the query from the device in OpManager, the value always comes back as 0. Ideas?
Please provide Detail Documentation of Op Manger Reports
Hello, I want to evaluate and understand Op Manger Reports. Kindly provide me a Detail Documentation of Op Manger Reports.
update for last version.
Hello Guys, how procedure, the biuld is 8812
Run a remote executable
Hi there, I'm trying to run a executable using a vbscrit. I'm using this : Dim objShell Set objShell = WScript.CreateObject( "WScript.Shell" ) objShell.Run("c:\executable.exe") Set objShell = Nothing and I'm always receiving this message : Script output: C:\OpManager_303_1380641980425.vbs(3, 1) (null): The system cannot find the file specified. Can someone help me? I really need to use this executable because it verifies if the user profile is being used or not. Thanks in advance,
TopoMapper issues
team, I noted you had release TopoMapper in following URL: http://www.manageengine.com/topomapper/ I downloaded & tried it, found there are following issues: 1. The Topo Mapper could not be installed in a machine that OpManager had running/installed. 2. Even I install the Topo Mapper in a new machine, it unable to discover any device, after setting and do discovery. 3. could you tell me who i can contact to resolve the issues? Regards, LI Guiquan
Memory/Disk Utilization not displaying after upgrade to 10200
Hello, After upgrading to 10200 (last night) I noticed that any physical server is no longer collecting or displaying Memory or Disk Utilization. This is happening for all versions of Windows 2003 (32/64it), Windows 2008 (64bit), Windows 2008r2 (64bit) and Windows 2012 (64bit). If we go into Memory/Disk Utilization and click test it starts to work again, but we have a few hundred physical servers still. Is there a fix available for this? TIA
Problem on upgrade from 9100 to 11100
Hi, Currently we are using Opmanager 9100 and want to upgrade to the last version (11100). We tried to follow the instructions but the applications stops to respond after apply the last service pack (change from 9100 to 11100 ), can you help us ?
how to add pritner to opmanager?
hi team how to add printers to opmanager for monitoring, need detailed steps pls.
Error parsing MIB:F5-BIGIP-LOCAL-MIB.txt
Hi, I am trying to install MIB files for F5 ltm load balancers unfortunately when I am trying to import them to OpManager via MIB Browser I get the following error “Error parsing MIB:F5-BIGIP-LOCAL-MIB.txt Exception while loading MIB:IMPORTS failed: Could not find the file : C:/MANAGE~1/OPMANA~1/./mibs/INET-ADDRESS-MIB” Mentioned MIB files are attached. My OpManager installation info ; OS Name & Version : Microsoft Windows Server 2008 R2 Standard OpManager version : 10100 (64 Bit) I need
Next Page